Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
2 results
Search Results
Item Вагові характеристики та області раціонального використання сталевих балок у будівлях та конструкціях вантажопідйомних машин(ЦНТУ, 2019) Пашинський, В. А.; Скриннік, І. О.; Харченко, І. В.; Хачатурян, С. Л.; Пашинский, В. А.; Скрынник, И. О.; Харченко, И. В.; Хачатурян, С. Л.; Pashinskyi, V.; Skrynnik, I.; Kharchenko, I.; Khachaturian, S.За результатами експериментального проектування сталевих балок чотирьох типів виявлені та описані залежності їх маси від прольоту й діючого навантаження. Встановлено, що при малих навантаженнях і великих прольотах власна вага балок може перевищувати 20% корисного навантаження. Розроблені укрупнені розцінки на виготовлення та монтаж сталевих балок і колон різних типів. З урахуванням несучої здатності, металоємності та вартості надані рекомендації щодо раціонального використання балок різних типів. По результатам экспериментального проектирования стальных балок четырех типов выявлены и описаны зависимости их массы от пролета и действующей нагрузки. Выявлено, что при малых нагрузках и больших пролетах собственный вес балок может превышать 20% полезной нагрузки. Разработаны укрупненные расценки на изготовление и монтаж стальных балок и колонн различных типов. С учетом несущей способности, металлоемкости и стоимости даны рекомендации относительно рационального использования балок различных типов. The purpose of this work is to obtain dependencies for the preliminary determination of specific quantity of metal and loads from their weight of steel beams of different types, as well as outline the area of rational use of beams of the investigated types, taking into account the criteria of specific quantity of metal and their cost. Experimental design of steel beams of four types is performed: rolled I-beams, perforated steel beams, from the developed assortment of welded H-beams and welded H-beams of individual design. Beam spans varied from 3 m to 36 m, and the design values of the loads were set equal to 5...150 kN/m. The indicated limits are selected taking into account the possible use of beams in load-lifting machines design, roof designs of production and civil buildings, as well as restrictions of assortments of I-beams. For beams of four types the areas of rational use according to criteria of durability and rigidity are defined. By analytical equations detected and described the dependence on the mass of projected beams to span and load. It is shown that for small loads and large spans, the own weight of beams can exceed 20% of the payload. The enlarged prices for manufacturing and installation of steel beams and columns of various types are developed. The presentation of weight characteristics and prices in the form of dependencies of the main constructive factors allows to estimate the specific quantity of metal and the cost of beams of different types before their designing. The recommendations are given for rational use of beams of different types, taking into account their load-bearing capacity, specific quantity of metal and cost. As a result of the studies performed, a distinction has been made between the areas of rational use of beams of various types, the dependencies of the weight characteristics on the span and the load on the beams are made, the enlarged prices for fabrication and installation have been described. The obtained results allows to choose a rational constructive solution of rolling or welded beams with a known span and the value of the payload.Item Впровадження системи «бережливого виробництва» на українських підприємствах машинобудівної галузі як стратегія підвищення їх конкурентоспроможності(КНТУ, 2016) Харченко, І. В.; Романюк, Л. М.; Kharchenko, Ihor; Romaniuk, LjudmilaСтаття присвячена особливостям впровадження системи організації виробництва, відомої як «бережливе виробництво», на українських машинобудівних підприємствах. Проаналізовані недоліки впровадження деяких важливих положень, сформульованих авторами даної концепції. Обгрунтовано необхідність врахування певних особливостей українських економічних реалій. The aim of the research is correct realization of some major ideas lying in the basis of the “lean production” organization system at Ukrainian machine-building plants and taking into consideration Ukrainian reality. The analyzed Ukrainian machine-building plant use expensive modern processing centers instead of universal equipment. The usage of these processing centers allows to reduce the duration of production time (cycle), but increases technological prime price significantly even taking into account the fact that WIP increases in the latter case. The usage of heavy vehicles and human resources differs in Ukrainian and Japanese enterprises since the cost of the vehicles’ usage and human work is very different. The research proves that implementation of this system at Ukrainian machine-building plants doesn’t always take into consideration the main regulations of the lean production.