Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
4 results
Search Results
Item Алгоритм цифрової ідентифікації зернових матеріалів(ЦНТУ, 2024) Степаненко, С. П.; Днесь, В. І.; Борис, А. М.; Кузьмич, А. Я.; Волик, Д. А.; Stepanenko, S.; Dnes, V.; Borys, A.; Kuzmych, A.; Volyk, D.Розглянуто питання застосування технологій машинного зору для підвищення точності та ефективності ідентифікації зернових матеріалів у процесі післязбиральної обробки. Визначено, що традиційні методи контролю якості зерна, зокрема візуальні, мікробіологічні та хімічні тести, мають суттєві обмеження при ідентифікації домішок, особливо тих, що подібні за фізичними та візуальними ознаками. Запропоновано алгоритм цифрової ідентифікації зерна, заснований на методах машинного зору та машинного навчання. The article examines the application of machine vision technologies to enhance the accuracy and efficiency of grain material identification during post-harvest processing. It has been determined that traditional grain quality control methods, including visual, microbiological, and chemical tests, have significant limitations in identifying impurities, especially those similar in physical and visual characteristics. In response to these challenges, a digital grain identification algorithm based on machine vision and machine learning methods is proposed.Item Дослідження фізико-механічних та оптичних характеристик зернових матеріалів(ЦНТУ, 2024) Степаненко, С. П.; Кузьмич, А. Я.; Борис, А. М.; Днесь, В. І.; Волик, Д. А.; Кузьмич, А. А.; Stepanenko, S.; Kuzmych, A.; Borys, A.; Dnes, V.; Volyk, D.; Kuzmych, A.Дослідження виконувалося на основі експериментальних даних щодо основних фізикомеханічних характеристик пшениці та її оболонок. Подано структурно-функціональну схему і опис приладу для визначення оптичних характеристик зернових матеріалів.Встановлено, що зі збільшенням вологості зростають і досліджувані показники: коефіцієнт тертя, кут природного укосу та коефіцієнт внутрішнього тертя. Отримано значення спектральних коефіцієнтів відбиття випромінювання видимого діапазону від зернових матеріалів та коефіцієнтів пропускання випромінювання від висоти шару матеріалу. The purpose of the study is to experimentally study the dependence of the physical and mechanical parameters of wheat grain on the moisture level and optical characteristics: the coefficient of friction on the perforated surface, the angle of natural slope and the coefficient of internal friction, the coefficient of absorption and reflection of light rays from the grain. The study is based on experimental data on the main physical and mechanical characteristics of wheat and its husks. The method of determining the physical and mechanical characteristics of wheat grain is presented, and the conditions of the experiments are described. The work presents a structural and functional scheme and a description of the device for determining the optical characteristics of grain materials.Item Теорія процесу копіювання головок коренеплодів цукрових буряків новим копірно-роторним відокремлювачем гички(КНТУ, 2013) Калетнік, Г. М.; Булгаков, В. М.; Адамчук, В. В.; Борис, А. М.; Свірень, М. О.; Орищенко, С. Б.; Kaletnik, Grigory; Bulgakov, Vladimir; Adamchuk, Valery; Borys, A.; Sviren, Nikolay; Orischenko, SergeyРозроблено математичну модель вільних коливань при складному русі робочого елемента копірно-роторного відокремлювача гички цукрових буряків. За допомогою даної моделі досліджено процес копіювання головок коренеплодів. В результаті досліджень встановлено можливість використання даного робочого органу на швидкостях поступального руху машини 2…2,5 м/с. New mathematical model of free oscillations of the tool of the rotor device for removal of sugar beet haulm at its slave compound motion is developed. The process of effective slave motion along root crops heads is examined by means of the solution of this model on the computer. As a result the possibility of use of this tool at velocity range 2,0…2,5 m/s of a translational motion of a harvesting machine is defined.Item Математична модель динамічної взаємодії робочого елемента відокремлювача гички з головкою коренеплоду(КНТУ, 2012) Булгаков, В. М.; Борис, А. М.; Bulgakov, V.; Borys, A.Розроблено математичну модель взаємодії робочого елемента з головкою коренеплоду цукрових буряків при його складному русі. Отримані аналітичні залежності нормальної реакції, яку створює робочий елемент на коренеплід, від конструкційних параметрів відокремлювача гички та його режимів роботи. За допомогою даної моделі досліджено рух робочого елемента по головці коренеплоду та отримані залежності зміни складових нормальної реакції від часу. Значення складових нормальної реакції були використані у подальшому для силового аналізу вказаної взаємодії. The mathematical model of interaction between the working element of bolt root of sugar beet, with its complex motion. The analytical dependence of the normal reaction that creates a working element to the root, from the structural parameters of separator tops and its modes of operation. With this model the movement of the working element in the head and root dependences change part of the normal reaction times. The value of the normal components of the reaction were used in the future for power analysis indicated interaction.