Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
Search Results
Item Мінімізація тривалості перебігу перехідних процесів роторної машини на пружно-в’язких опорах з одним автобалансиром(КНТУ, 2015) Гончаров, В. В.; Honcharov, ValeryДосліджено тривалість перебігу перехідних процесів в роторній машині, в якій ротор поміщений з можливістю обертатися навколо власної поздовжньої осі в корпус на пружно-в’язких опорах і зрівноважується статично одним автобалансиром з багатьма корегувальними вантажами. Показано, що тривалість перебігу перехідних процесів: а) залежить від семи безрозмірних параметрів; б) зменшується при збільшенні маси корегувальних вантажів та значному збільшенні: - видовженності складеного ротора (на великих швидкостях обертання); - жорсткості опор корпуса для довгого (на великих швидкостях обертання) і короткого (на малих швидкостях обертання) складеного ротора; - швидкості обертання для довгого і дуже короткого складеного ротора; в) суттєво зменшується при наближенні швидкості обертання ротора до його резонансної швидкості за рахунок безпосереднього зменшення швидкості обертання або – збільшення резонансної швидкості через збільшення видовженності складеного ротора чи жорсткості його опор; г) зменшується при: значному віддалені точки підвісу від центра мас ротора або наближенні безпосередньо до нього для довгого и сферичного (на малих швидкостях обертання) складеного ротора; при наближенні точки підвісу до свого екстремального значення для короткого и сферичного (на великих швидкостях обертання) складеного ротора. Passive auto-balancers are used at balancing of many rotary machines. The investigations of transition processes upon the occurrence of auto-balancing of rotating machines with auto-balancers are absent practically at the moment. In this work analytically investigated the duration of the flow of the transition processes upon the occurrence of auto-balancing in rotor machine in which the rotor is placed with the possibility to rotate around its longitudinal axis in a corps on viscoelastic supports and statically balanced by one auto-balancer with many corrective weights. It is shown that the duration of the flow of the transition processes: а) depends on seven dimensionless parameters; b) decreases with increasing of mass of corrective weights and with a significant increase: - elongation of the composite rotor (at great speeds of rotation); - of stiffness of supports of the corps for the long (at great speeds of rotation) and short (at low speeds of rotation) of the composite rotor; - of the speed of rotation for long and very short of the composite rotor; c) decreases substantially at approaching of the speed of rotation of the rotor to its resonant speed by directly reduction of the speed of rotation or - increasing of resonant speed by increasing of the elongation of the composite rotor or of stiffness its supports; d) decreases when: a significant removal of a point of suspension of AB from the center mass of the rotor, or approach to it for the long and spherical (at low speeds of rotation) of composite rotor; approximation of the point of suspension to its extreme value for short and spherical (at high speeds of rotation) of composite rotor.Item Мінімізація тривалості перебігу перехідних процесів роторної машини з автобалансиром і нерухомою точкою(КНТУ, 2015) Гончаров, В. В.; Honcharov, ValeryАналітично досліджено тривалість перебігу перехідних процесів при настанні автобалансування в роторній машині, в якій ротор поміщений з можливістю обертатися навколо власної поздовжньої осі в корпус з нерухомою точкою і зрівноважується автобалансиром з багатьма корегувальними вантажами. Показано, що тривалість перебігу перехідних процесів при настанні автобалансування зменшується при: - збільшенні маси корегувальних вантажів, видовженності складеного ротора, швидкості обертання ротора (на великих крейсерських швидкостях); - зменшенні швидкості обертання ротора (на малих крейсерських швидкостях). Тривалість перебігу перехідних процесів суттєво зменшується при наближенні: видовженності складеного ротора до свого максимально допустимого значення; швидкості обертання ротора до резонансної швидкості. The passive auto-balancers used for balancing many rotors. At the moment, virtually no studies of transition processes upon the occurrence of auto-balancing of rotating machines with auto-balancers. In this paper the duration of the transient processes at the occurrence of auto-balancing in rotor machine in which the rotor is placed with the possibility to rotate around its longitudinal axis in the corps with a fixed point and is balanced by auto-balancer with many corrective loads is analytically investigated. It is shown that the duration of the transition processes at the occurrence of auto-balancing is reduced when: the weight of corrective loads, elongation of composite rotor, rotor speed (at high cruising speeds) are increased; reducing of the rotor speed ( at low cruising speeds). The duration of the transient processes is significantly reduced when approaching: of elongation of composite rotor to its maximum permissible value; of rotor speed to a resonance speed