Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
3 results
Search Results
Item Імітаційне моделювання роботи холодильного устаткування фірми Danfoss у складі оптимальної двоканальної системи стабілізації температури повітря у холодильній камері супермаркету(ЦНТУ, 2019) Лужков, Д. М.; Осадчий, С. І.; Осадчий, С. И.; Luzshkov, D.; Osadchy, S.Мета статті полягає у розробці алгоритму оцінювання характеристик холодильного коефіцієнту обладнання фірми Danfoss , яке функціонує у складі оптимальної двоканальної системи стабілізації повітря при наявності випадкових корисних сигналів збурень та завад. Алгоритм складається з двох етапів. На першому етапі на основі результатів структурної ідентифікації та синтезу оптимальної системи стабілізації виконується імітаційне моделювання роботи холодильного устаткування. На другому етапі, на основі результатів імітаційного моделювання у вигляді кривої зміни холодильного коефіцієнту оцінюється ефективність холодильного устаткування. Цель статьи заключается в разработке алгоритма оценки характеристик холодильного коэффициента оборудования фирмы Danfoss, которое функционирует в составе оптимальной двухканальной системы стабилизации воздуха при наличии случайных полезных сигналов возмущений и помех. Алгоритм состоит из двух этапов. На первом этапе на основе результатов структурной идентификации и синтеза оптимальной системы стабилизации выполняется имитационное моделирование работы холодильного оборудования. На втором этапе, на основе результатов имитационного моделирования в виде кривой изменения холодильного коэффициента оценивается эффективность холодильного оборудования. The article purpose is to develop an algorithm for assessing the refrigeration coefficient characteristics of the Danfoss equipment, which operates as a part of an optimal two-channel air stabilization system in the presence of random useful signals , disturbances and interferences. It is developed an algorithm that consists of two stages to achieve this goal in the article. The stabilization system structural scheme was converted to a convenient form for modeling under the algorithm's first stage performing process. Based on the converted block diagram using the Simulink tool, a simulation model of the refrigeration coefficient changing process is developed. The algorithm second step purpose is to obtain estimates of the mathematical expectation and variance of the refrigeration coefficient change. The initial data for its implementation is the simulation result, namely, changes in the refrigeration coefficient's graphic. A new algorithm for assessing the refrigeration coefficient characteristics of the Danfoss equipment, which operates as a part of an optimal two-channel air temperature stabilization system in the presence of random useful signals , disturbances and interferences, consists of performing two interrelated steps: development of a system simulation model and the resulting refractive curve numerical characteristics estimation. Comparison of refrigeration coefficients change graphics in the optimal stabilization system and in the existing system in the same operating conditions proves that the implementation of the optimal control law allows to reduce significantly the high-frequency component of the refrigeration coefficient fluctuations and as a consequence to improve the equipment efficiency.Item Ідентифікація лінеаризованої моделі динаміки контролера та терморегулювального вентилю фірми Danfoss за даними пасивного експерименту(ЦНТУ, 2018) Лужков, Д. М.; Осадчий, С. І.; Дідик, О. К.; Осадчий, С. И.; Дидык, А. К.; Luzshkov, D.; Osadchy, S.; Didyk, O.Мета статті полягає у забезпеченні конструкторів та дослідників роботи систем автоматизації процесу керування холодильним обладнанням з одним терморегулювальним вентилем вихідними даними про лінеаризовану модель динаміки контролера разом з регулювальним органом. Ідентифікація виконана у три етапи. На першому етапі на основі даних пасивного експерименту одержані спектральні та взаємні спектральні щільності сигналів. На другому етапі, на основі результатів першого, визначені передаточні функції елементів системи та формуючого фільтру завад. На третьому етапі виконана верифікація результатів ідентифікації, при якій використовувались експериментальні дані та одержані передаточні функції на другому етапі. Цель статьи заключается в обеспечении конструкторов и исследователей работы систем автоматизации процесса управления холодильным оборудованием с одним терморегулирующим вентилем исходными данными о линеаризованной модели динамики контроллера вместе с регулирующим органом. Идентификация выполнена в три этапа. На первом этапе на основе данных пассивного эксперимента полученные спектральные и взаимные спектральные плотности сигналов. На втором этапе, на основе результатов первого, определены передаточные функции элементов системы и формирующего фильтра помех. На третьем этапе выполнена верификация результатов идентификации, при которой использовались экспериментальные данные и полученные передаточные функции на втором этапе. Main purpose of the article is to provide designers and researchers with a dynamics models of a controller for refrigerating equipment with one thermal control valves in conjunction with a regulatory body.. This article is devoted to an analysis of the trends improve refrigeration efficiency by upgrading the control system of a thermostatic expansion valve. It is shown that Danfoss refrigeration equipment increases the efficiency of the formation of the cold due to changes in the evaporator superheat setting. The main idea of upgrading is to use a systems approach to the consideration of refrigeration equipment in conjunction with the cooling chamber and the products which are stored in it. To realize this idea one has developed a new block diagram of the cooling system as a multidimensional follow-up system that operates in conditions of air temperature changes in the refrigerating chamber and fluctuations of the refrigerant temperature and its pressure. The definition of a linearized model took place in three stages. In the first stage, based on the data of the passive experiment, spectral and cross spectral densities of signals are obtained. In the second stage, based on the results of the first, the transfer functions of the system elements and the filtering block are defined. In the third stage, the verification of the identification results, which used experimental data and received transfer functions in the second stage, was performed. The separation of the signal records that are active at the inputs and outputs of the AK-CC 550 controller and Danfoss thermostat valve allows you to determine the linearized pattern of the dynamics of the specified elements, which corresponds to the mode of operation of these elements during the recording of signals. The new transfer functions obtained form the basis for adapting the known methods of synthesis of control systems to the definition of the structure and parameters of the law of control, which is aimed at improving the efficiency of the use of cold in real operating conditions.Item Шляхи модернізації систем автоматики холодильного устаткування з одним терморегулювальним вентилем(ЦНТУ, 2017) Осадчий, С. І.; Лужков, Д. М.; Osadchy, S.; Luzshkov, D.Стаття присвячена аналізу тенденцій підвищення ефективності холодильного устаткування за рахунок модернізації системи керування роботою терморегулювального вентиля. Показано, що холодильне обладнання фірми Danfoss підвищує ефективність утворення холоду за рахунок зміни уставки перегріву випарника. Головна ідея модернізації полягає у застосуванні системного підходу до розгляду холодильного устаткування у комплексі з холодильною камерою та продуктами, які зберігаються у ній. Для реалізації зазначеної ідеї у статті розроблена нова структурна схема системи охолодження продуктів як багатовимірної системи слідкування, яка функціонує в умовах зміни температури у холодильній камері, коливаннях тиску та температури хладагенту. This article is devoted to an analysis of the trends improve refrigeration efficiency by upgrading the control system of a thermostatic expansion valve. It is shown that Danfoss refrigeration equipment increases the efficiency of the formation of the cold due to changes in the evaporator superheat setting. The main idea of upgrading is to use a systems approach to the consideration of refrigeration equipment in conjunction with the cooling chamber and the products which are stored in it. To realize this idea one has developed a new block diagram of the cooling system as a multidimensional follow-up system that operates in conditions of air temperature changes in the refrigerating chamber and fluctuations of the refrigerant temperature and its pressure. The resulting new structural schemes form the basis for adapting known methods of structural identification of dynamical models of objects to determine the dynamics of uncontrolled disturbances acting on a control object in real operating conditions.