Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
7 results
Search Results
Item Підвищення ефективності роботи машинобудівного підприємства на основі логістично-спрямованого підходу(ЦНТУ, 2022) Головатий, А. О.; Holovatyi, А.На базі типового машинобудівного підприємства розглянуто проблему підвищення ефективності його функціонування використанням логістично-спрямованого підходу. Визначено основні процеси виробничої діяльності в рамках конкретного машинобудівного підприємства, на якому виділено виробничу, виробничо-збутову або постачальницько-виробничо-збутову системи. З’ясовані питання щодо створення на підприємстві логістичної системи та його логістичного управління в умовах логістичного оточення з урахуванням факторів макро-, мезо- і мікросередовища. Виходячи з логістично-спрямованого підходу побудовано структуру підприємства, визначена його логістична місія на кожному етапі виробничо-господарської діяльності. В рамках кібернетичного підходу ланку логістичної системи представлено як визначений елемент перетворення матеріальних і інформаційних потоків. Запропоновано векторне рівняння цього перетворення з урахуванням сукупності характерних векторів. Показано, що сукупність логістичних дій реалізується в постачальницькій, виробничій або збутовій сферах. Визначені критерії ефективного логістичного управління. Наведена їх реалізація на прикладі мінімуму загальних логістичних витрат і максимуму прибутку від виконаних усіх логістичних дій. Розглянуто формалізацію завдання ефективного логістичного управління на машинобудівному підприємстві за мінімізацією загальних логістичних витрат. On the basis of a typical machine-building enterprise the problem of increasing the efficiency of its operation using a logistics-oriented approach is considered. The basic processes of production activity within the limits of the concrete machine-building enterprise on which production, production-sales or supplier-production-sales systems are allocated are defined. The issues of creating a logistics system at the enterprise and its logistics management in the logistics environment, taking into account the factors of macro-, meso- and micro-environment. Based on the logistics-oriented approach, the structure of the enterprise is built, its logistics mission at each stage of production and economic activity is determined. Within the cybernetic approach, the link of the logistics system is presented as a certain element of the transformation of material and information flows. The vector equation of this transformation taking into account the set of characteristic vectors is offered. It is shown that the set of logistics actions is implemented in the supply, production or sales areas. Criteria for effective logistics management are defined. Their implementation is given on the example of the minimum total logistics costs and the maximum profit from all logistics activities. The formalization of the task of effective logistics management at a machine-building enterprise to minimize overall logistics costs is considered.Item Систематизація підходів до визначення категорії «економіка знань»(КНТУ, 2016) Подлужна, Н. О.; Podluzhna, N.Систематизовано основні підходи до визначення категорії «економіка знань». Визначено процеси, в яких приймають участь знання для забезпечення функціонування економіки знань у країні, та встановлено серед них основні: виробництво, нагромадження, використання та поширення знань. Запропоновано до складу цих процесів включити інвестування в людський розвиток, науку та інформаційно-комунікативні технології. The aim of scientific research is the development of conceptual and categorical apparatus of the knowledge economy and systematization of the main approaches to the definition of this category. The main approaches to the definition of «knowledge economy» category were systematized. The processes, in which knowledge take part to provide knowledge-based economy in the country were defined; the main among them are: production, stockpiling, use and dissemination of knowledge. It was proposed to include investing in human capital, science and ICT to the structure of these processes. The relevant factors and the main results of the functioning of knowledge economy in the country were identified. The structure of investment in human capital, which has been used in the development of the category of the knowledge economy, was clarified. The author's definition of the knowledge economy, which is a type of post-industrial economy, consists of the processes of production, storage, use, dissemination of the knowledge and investment in them. It contributes to the human growth in the country and increases its level of competitiveness and innovativeness.Item Виробничі фактори соціально-економічного впливу на демографічні процеси(КНТУ, 2007) Яковенко, Р. В.; Yakovenko, R.Аналізується низка чинників, що здійснюють прямий чи опосередкований вплив на демографічні процеси на макро- чи мікрорівні в системі виробничих відносин. Визначається соціально-економічний механізм удосконалення виробничих факторів впливу на демографічні явища та тенденції з метою їх поліпшення. A number of factors which carry out direct or indirect influence on demographic processes on macro- or micro levels in the system of production relations are analyzed. The socio-economic mechanism of improvement of production factors of influence on the demographic phenomena and tendencies with the purpose of their improvement is defined.Item Оценка структуры национальной экономики с точки зрения устойчивости развития(КНТУ, 2016) Аскерова, С. А.; Asgarova, SonaОсновной целью исследования является уточнение факторов, определяющих устойчивость развития национальной экономики и механизма оптимизации ее структуры. В данной статье исследуются теоретические и практические проблемы реструктуризации экономики. Анализируется существующий уровень экономического потенциала и достигнутые результаты проводимой политики. Структурная политика государства согласовывается с прогнозами долгосрочного развития. Поэтому при определении основных направлений экономического развития нужно учесть взаимосвязи отдельных отраслей экономики. Основною метою дослідження є виявлення факторів, що визначають стійкість розвитку національної економіки та механізму оптимізації її структури. У даній статті досліджуються теоретичні та практичні проблеми реструктуризації економіки. Аналізується існуючий рівень економічного потенціалу та досягнуті результати проведеної політики. Структурна політика держави узгоджується з прогнозами довгострокового розвитку. Тому при визначенні основних напрямів економічного розвитку потрібно врахувати взаємозв'язки окремих галузей економіки. The main purpose of research is to find out factors determining the stability of the national economy mechanism and optimize its structure. This article explores the theoretical and practical problems of economic restructuring. However, it also analyzes the current level of economic potential and achievements of the policies. Structural policy of the government also agrees with the long-term development forecasts. While determining of the main directions of economic development relationships with individual sectors of the economy must be taken into account.Item Аналіз конструкцій технічних засобів для виробництва вологих високозасвоюваних кормів(КНТУ, 2013) Шевченко, І. А.; Павліченко, В. М.; Лиходід, В. В.; Забудченко, В. М.; Shevchenko, Igor; Pavlichenko, Valentina; Lykhodid, Viktor; Zabudchenko, V.Виконано огляд конструкцій та аналіз особливостей роботи існуючих технічних засобів для виробництва вологих високозасвоюваних кормів. За результатами аналізу розроблено конструктивно-технологічну схему й створено експериментальний зразок роторного кавітаційного диспергатора РоКаДі-2. Стверджується, що запропонована конструкція має покращені технічні дані порівняно з аналогами й забезпечує ступінь подрібнення компонентів вологих кормів в межах норм технологічних вимог. The aim of the research is to reduce costs by increasing forage digestibility of nutritive substances and reducing energy consumption in animal digestion. The review of the design and analysis of the characteristics of existing technical means for production of wet highly digestible food. According to the analysis developed constructive-technological scheme and created the experimental model of rotary cavitation dispersant RoСaDі-2. Approved that the proposed construction has improved specifications compared to analogues. Аlleged that the proposed construction of the dispersant can be expected high degree of grinding wet food components within the limits of technological requirements.Item Компромісна оптимізаційна модель в контексті економічної безпеки(КНТУ, 2014) Колесніков, Д. В.; Kolesnikov, DenisВ статі описано формування моделі оптимізації структури виробництва через збалансування ресурсного забезпечення системи. Для підприємства розроблена та вирішена економіко-математична модель оптимізації співвідношення між товарними культурами, що забезпечують основну прибутковість підприємства. Методика запропонована нами дозволяє визначити параметри сільськогосподарських підприємств, які орієнтовані на досягнення максимально можливої стійкості сільськогосподарської технології в цілях забезпечення економічної безпеки агропромислового підприємства. In the article forming of model of optimization of pattern of production is described through balancing of the resource providing of the system. For an enterprise developed and decided economic-mathematical model of optimization of betweenness by commodity cultures which provide basic profitability of enterprise. A method is offered by us allows to define the parameters of agricultural enterprises, which are oriented to achievement of maximally possible firmness of agricultural technology for providing of economic security of agroindustrial enterprise.Item Обґрунтування варіантів оподаткування підприємств малого бізнесу регіону(КНТУ, 2014) Бондаренко, О. В.; Bondarenko, AlexeiСтаття присвячена аналізу функціонування малих підприємств на рівні регіону в умовах різних систем оподаткування за допомогою комплексу імітаційних моделей. Розкрито особливості імітаційних моделей для малих підприємств регіону, які враховують фактори диференційованого попиту, взаємозамінності трудових ресурсів, диверсифікації виробничої діяльності і дозволяють не тільки судити про ефективність тієї чи іншої системи оподаткування, але і зробити вибір на користь однієї з них для конкретного малого підприємства регіону. Обґрунтовано процес розподілу прибутку малого підприємства і визначено значення відповідних параметрів імітаційної моделі; при цьому була розроблена методика реалізації імітаційно-оптимізаційного походу до моделювання діяльності малих підприємств. This article analyses the operation of small businesses at the regional level under different tax systems with the help of complex simulation models. The features of simulation models for small businesses in the region. Complex simulation models analysing the operation of small businesses can not only judge the effectiveness of a tax system, but also to make a choice in favour of one of them for a particular small enterprises in the region. Profit distribution process reasonably small enterprise and the values of the relevant parameters of simulation model; in this technique was developed implementing imitation - optimization campaign to modelling of small businesses. Shows the principal features of simulation models of small firms, consisting in accounting factors differentiated demand substitutability of labour resources in multidisciplinary productions diversification activities on multi- enterprises; developed a schematic diagram calculations using optimization models (in the case of multi- enterprise).