Кафедра сільськогосподарського машинобудування
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/11692
Browse
3 results
Search Results
Item Механізація вирощування гречки з удосконаленням інерційного сепаратора зерна(ЦНТУ, 2024-12-27) Шевельов, Дмитро Сергійович; Shevelov, DmytroДипломна робота спрямована на підвищення ефективності вирощування гречки та якості очищення насіння шляхом вдосконалення технології післязбирального очищення та модернізації сепаратора ІПС-2. На основі аналізу базової технології вирощування гречки в господарстві визначено недоліки, які стримують ефективність цього процесу та розроблені рекомендації, що дозволять отримати прогнозовану врожайність близько 12 ц/га. В роботі розроблена операційна карта на післязбиральне очищення та визначено, що одним з обмежуючих факторів в процесі післязбиральної обробки насіння гречки є вторинне очищення. Проведений огляд та аналіз конструкцій повітряних систем зерноочисних машин в результаті якого визначено, що підвищення якості сепарації можливе шляхом послідовного очищення та доочищення зерна, збільшення зони пневмосепарації, часу та площі контакту зернового матеріалу з повітряним потоком. В результаті проведених досліджень визначено, що застосування дугоподібної напрямної поверхні замість похилого лотка, покращує рівномірність заповнення робочої зони в пневмосепаруючому каналі та збільшує траєкторії розсіювання частинок суміші, чим покращує роздільну здатність процесу сепарації. На основі отриманих результатів експериментальних досліджень проведено інженерний розрахунок основних параметрів повітряної системи вдосконаленого прямоточного інерційного сепаратора ІПС-2 та внесені відповідні зміни в конструкцію машини. The thesis is aimed at increasing the efficiency of buckwheat cultivation and the quality of seed cleaning by improving the technology of post-harvest cleaning and modernizing the IPS-2 separator. Based on the analysis of the basic technology of buckwheat cultivation on the farm, shortcomings that hinder the efficiency of this process have been identified and recommendations have been developed that will allow obtaining a predicted yield of about 12 c / ha. The work has developed an operational map for post-harvest cleaning and determined that one of the limiting factors in the process of post-harvest processing of buckwheat seeds is secondary cleaning. A review and analysis of the designs of air systems of grain cleaning machines was conducted, as a result of which it was determined that improving the quality of separation is possible by sequential cleaning and additional cleaning of grain, increasing the pneumatic separation zone, time and area of contact of grain material with the air flow. As a result of the conducted research, it was determined that the use of an arcuate guide surface instead of an inclined tray improves the uniformity of filling the working area in the pneumatic separation channel and increases the dispersion trajectories of the mixture particles, thereby improving the resolution of the separation process. Based on the results of experimental research, an engineering calculation of the main parameters of the air system of the improved direct-flow inertial separator IPS-2 was carried out and appropriate changes were made to the design of the machine.Item Удосконалення зерноочисної машини ОВС-25 з обґрунтуванням параметрів пневмосистеми(ЦНТУ, 2024-06-20) Сергійчук, Богдан Володимирович; Serhiichuk, BohdanДипломна робота спрямована на підвищення ефективності роботи пневмосистеми зерноочисної машини ОВС-25 шляхом вдосконалення конструкції живильного пристрою її пневмосепаруючого каналу. В роботі проведено огляд зерноочисних машин та аналіз результатів досліджень пневмосепарації в результаті якого визначено, що однією з причин низької ефективності роботи пневмосепарації є підвищення опору повітряному потоку. Тому, пріоритетним напрямком інтенсифікації процесу пневмосепарації є створення умов для ефективного виділення домішок та підвищення рівномірності розподілу зернового матеріалу в поперечному перерізі пневмосепараційного каналу. Обґрунтувано раціональні параметри та режими роботи живильно-розподільчого пристрою та проведені відповідні експериментальні дослідження щодо встановлення закономірностей просіювання зерна по довжині решета в залежності від кута його нахилу та питомого навантаження. Отримана порівняльна характеристика для базового та вдосконаленого каналу підтверджує, що за рахунок запропонованого вдосконалення можна отримати підвищення якості повітряного очищення та збільшити продуктивність машини. The thesis is aimed at increasing the efficiency of the pneumatic system of the grain cleaning machine OVS-25 by improving the design of the feeding device of its pneumatic separation channel. The paper reviews grain cleaning machines and analyzes the results of research on pneumatic separation, as a result of which it was determined that one of the reasons for the low efficiency of pneumatic separation is the increase in resistance to the air flow. Therefore, the priority direction of intensification of the pneumatic separation process is to create conditions for the effective separation of impurities and increase the uniformity of the distribution of grain material in the cross section of the pneumatic separation channel. The rational parameters and operating modes of the feeding and distribution device are substantiated and the corresponding experimental studies are conducted to establish the regularities of grain screening along the length of the sieve depending on the angle of its inclination and specific load. The obtained comparative characteristics for the basic and improved channel confirm that due to the proposed improvement, it is possible to obtain an improvement in the quality of air cleaning and increase the productivity of the machine.Item Обґрунтування параметрів зерноочисної машини з дослідженням осадового пристрою(ЦНТУ, 2023-05-23) Гнилуша, Андрій Вікторович; Hnylusha, AndriiРобота присвячена покращенню якості очищення зерна. Метою роботи є підвищення ефективності пневмосистеми зерноочисної машини шляхом вдосконалення конструкції осадового пристрою. В результаті модернізації пневмосепаратора запропоновано встановити жалюзійну стіну в ежекційному каналі для ефективного вловлювання пилоподібних часток зернової суміші, а також додаткову пластину в нижній частині осадової камери. Шляхом теоретичного аналізу обґрунтовано режимні характеристики пневмосистеми та отримано залежність для визначення швидкості повітряного потоку в будь якому перерізі сепаратора. В результаті експериментальних досліджень визначено, що внесені зміни в конструкцію сепаратора дозволяють підвищити повноту виділення легких домішок до ε ≥ 73%. The work is devoted to improving the quality of grain cleaning. The aim of the work is to increase the efficiency of the pneumatic system of the grain cleaning machine by improving the design of the sedimentation device. As a result of the modernization of the pneumatic separator, it was proposed to install a louvered wall in the ejection channel for effective capture of dusty particles of the grain mixture, as well as an additional plate in the lower part of the sedimentation chamber. By means of theoretical analysis, the operating characteristics of the pneumatic system are substantiated and the dependence for determining the air flow velocity in any section of the separator is obtained. As a result of experimental studies, it was determined that the changes made to the design of the separator can increase the completeness of the separation of light impurities up to ε ≥ 73%.