Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
3 results
Search Results
Item type:Item, Вплив складу шихти порошкових дротів на механічні властивості та корозійну стійкість електродугових покриттів(ЦНТУ, 2023) Студент, М. М.; Маркович, С. І.; Гвоздецький, В. М.; Задорожна, Х. Р.; Student, М.; Markovych, S.; Hvozdetskii, V.; Zadopozna, К.Досліджено механічні властивості, хімічну мікрогетерогенність та корозійну стійкість у 3% водному розчині NaCl електродугових покриттів з порошкових дротів (ПД) залежно від компонентного складу шихти, використаного під час їх виготовлення. Показано, що покриттям з ПД властива висока неоднорідність за хімічним складом, що відрізняє їх від покриттів, отриманих розпилюванням суцільних дротів. Адже подрібнені повітряним струменем краплини розплаву ПД, що формують покриття, суттєво різняться за хімічним складом. Такий градієнт спричинений неповним розплавленням і змішуванням складників шихти та сталевої оболонки в дузі між торцями ПД під час електродугового напилювання покриттів. Запропоновано додавати до складу шихти ПД порошки, які забезпечили би в краплинах розплаву ПД необхідну кількість хрому, бору, вуглецю. А саме, додавання до шихти ПД порошків ферохрому (ФХ), карбіду бору (B4C), ферохромбору (ФХБ), феросплавів (FeSi, FeMn) та самофлюсу ПГ10Н-01 дало змогу підвищити гомогенність розплаву ПД та активізувати утворення евтектик між складниками шихти ПД 90Х17РГС та ПД 90Х17Р3ГС. Завдяки цьому добились нижчої хімічної мікрогетерогенності отриманих покриттів та забезпечили їм високу корозійну тривкість, близьку до корозійної тривкості нержавіюча сталі Х18Н9Т. Electric arc spraying of coatings is common in many branches of industrial production, in particular to restore the geometry of machine parts worn in operational conditions, to increase their protection against abrasive and gas-abrasive wear (at the same time, both at climatic and at technologically determined elevated temperatures). Coatings sprayed using powdered wires are characterized by high chemical heterogeneity, which significantly distinguishes them from electric arc coatings made of solid wires. This is due to the different chemical composition of the droplets formed from the molten powder wires and carried by the air jet to the surface of the substrate, forming a coating on it. The charge with alloying elements in its composition (including difficult-to-melt ones such as FH, B4C, FHB) does not have time to fully melt and mix with the melt of the steel shell. It is clear that because of this, the melt droplets of flux-cored wires dispersed by an air jet will have a different chemical composition and , as a result, the coatings formed from these droplets on the surface of the substrate will be characterized by high heterogeneity and significant chemical heterogeneity, which will affect their physical and mechanical properties at different operating temperatures and especially when exposed to corrosive environments.Item type:Item, Вплив підвищеного тиску повітряного струменю на структуру і властивості електродугових покриттів(КНТУ, 2016) Студент, М. М.; Гвоздецький, В. М.; Маркович, С. І.; Student, М.; Hvozdetskyi, V.; Markovich, S.В статті наведено результати дослідження впливу тиску повітряного струменю на властивості покриттів. Встановлено, що збільшення тиску повітряного струменю від 0,6 до 1,2 МПа забезпечує зростання швидкості повітряного струменю від 300 до 600 м/с, а швидкість диспергованих краплин від 120 до 220 м/с. Підвищення тиску повітряного струменю від 0,6 до 1,2 МПа зумовлює зменшення товщини ламелей покриття, формування більшої кількості оксидної фази у покритті, при цьому зростає твердість, когезивна міцність та знижується рівень колових залишкових напружень першого роду у покритті. The aim is to investigate the effect of increasing the airspeed of molten drops during spraying coating. The article presents the results of research impact pressure air jet on the properties of coatings. It was established that increasing pressure air jet from 0.6 to 1.2 MPa, the growth speed air jet from 300 to 600 m / s, and shvydkistы dispersed droplets from 120 to 220 m / s. Increasing pressure air jet from 0.6 to 1.2 MPa causes thinning lamella coatings, forming more oxide phase in the coating, thus increasing strength, cohesive strength, and reduced levels of residual stresses circular first kind.Item type:Item, Вплив поруватості на трибологічні характеристики електродугових покриттів з порошкових дротів(КНТУ, 2014) Студент, М. М.; Ступницький, Т. Р.; Гвоздецький, В. М.; Маркович, С. І.; Мажейка, О. Й.; Student, М.; Stupnickiy, Т.; Gvozdeckiy, V.; Markovich, S.; Mazheyka, А.В статті досліджено вплив поруватості на трибологічні та механічні характеристики еллектродугових покриттів. Визначено, що структурою покриття з порошкових дротів є композит, де чергуються металеві ламелі та ламелі із оксидів, а також пори. Із ростом тиску повітряного струменю розмір структурних складових поверхні покриття та розмір пор зменшується. Встановлено позитивний вплив поруватості на трибологічні характеристики покриттів при терті за граничного мащення. Influence of porosity is investigational the article on mechanical properties of arc coatings. Exposed to research of coatings from different types powder-like. A structure, phase composition, porosity, resistance to the friction, cohesion of coatings depending on pressure of transporting gas, was studied. Determination of coefficient friction of coatings is exposed to research in the conditions of dry friction and border greasing It is set, that from powder-like wires the structure of coatings there is a compo, where metallic lamels and lamels alternate from oxides and also pore. With growth of pressure of air-blast the size of structural constituents of surface of coatings and size of pores diminishes. Positive influence of porosity is set on mechanical properties of coatings in the conditions of border friction. Аrc coatings of gradient type provide high mechanical properties of coatings at to the low level of remaining tensions of in them.