Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
3 results
Search Results
Item Експериментальні дослідження енергоємності роботи відцентрового прямоточного сепаратора зерна(ЦНТУ, 2019) Васильковський, О. М.; Лещенко, С. М.; Мороз, С. М.; Петренко, Д. І.; Васильковский, А. М.; Лещенко, С. Н.; Мороз, С. Н.; Петренко, Д. И.; Vasylkovskyi, O.; Leshchenko, S.; Moroz, S.; Petrenko, D.У статті наведено результати експериментальних досліджень енергоємності роботи оригінального відцентрового прямоточного повітряно-решітного очисника зернового вороху, в основу якого покладено багатофункціональний робочий орган – лопатевий ротор. У попередніх дослідженнях нами встановлені основні закономірності зміни енергетики даного сепаратора при роботі в режимі холостого ходу. Проведена нова серія експериментальних досліджень дозволила отримати залежності повної потужності на привід лопатевого ротора та потужності, що витрачається на розгін і переміщення зерна по решету від основних конструктивних та технологічних параметрів відцентрового прямоточного сепаратора зерна. В статье приведены результаты экспериментальных исследований энергоемкости работы оригинального центробежного прямоточного воздушно-решетного очистителя зернового вороха, в основу которого положен многофункциональный рабочий орган - лопастной ротор. В предыдущих исследованиях нами установлены основные закономерности изменения энергетики данного сепаратора при работе в режиме холостого хода. Проведенная новая серия экспериментальных исследований позволила получить зависимости полной мощности на привод лопастного ротора и мощности, расходуемой на разгон и перемещения зерна по решету от основных конструктивных и технологических параметров центробежного прямоточного сепаратора зерна. The purpose of the work is an experimental study of the components of the power on the drive of the original centrifugal pneumatic grate grain separator, as well as to determine the dependence of power on the basic design parameters of the impeller rotor and machine performance. Obtaining these regularities allows the design of centrifugal direct-flow grain-cleaning machines of different performance and to predict their energy performance in advance. The experiments were performed on a grain mixture of wheat with a moisture content of 13.6%. Contamination with small impurities was 5%. The main studies were performed on a laboratory stand that completely reproduces the experimental separator. The basis of the separator is the original arcuate sieve sieve and the blade rotor - grain accelerator. The number of rotor blades was 24. Determination of power per drive was carried out using the device K-50. During the experiments, two factors were changed - productivity (flow) and the kinematic index, which is a complex indicator and takes into account the radius and angular velocity of the rotor blade. As a result of the experiment, the dependences of the full power consumption for the drive of the blade rotor on the feed were obtained for different values of the kinematic mode index. Taking into account the previous experiments on determining the idling power, we determined the dependence of the power costs for the movement of grain on the arcuate sieve of a centrifugal flow separator from the feed for different values of the kinematic mode index. The total power on the drive of the rotor blade is proportional to the feed and is in the range of 100… 194 watts at kinematic indexes 113… 314 at feeds of 0.2… 1.25 kg / s. The power consumed to move the grain along the sieve is 10… 78 watts. In this case, there is a decrease in power gain with a proportional increase in flow, which can be explained by the movement of particles between layers. Additional tests are required to test the hypothesis of the relative movement of particles between layers.Item Дослідження енергоємності холостого ходу відцентрового сепаратора зерна(ЦНТУ, 2018) Васильковський, О. М.; Лещенко, С. М.; Мороз, С. М.; Петренко, Д. І.; Васильковский, А. М.; Лещенко, С. Н.; Мороз, С. Н.; Петренко, Д. И.; Vasylkovskyi, O.; Leshchenko, S.; Moroz, S.; Petrenko, D.У статті описано результати досліджень показників енергоємності роботи оригінального інерційного прямоточного сепаратора зерна оснащеного лопатевим ротором. Теоретичний аналіз дозволив встановити, що однією зі складових потужності холостого ходу є коефіцієнт пропорційності, який враховує енергетику внутрішніх процесів. Проведені експериментальні дослідження дозволили отримати залежності приводної потужності та коефіцієнту пропорційності від параметрів лопатевого ротора відцентрового прямоточного сепаратора зерна в режимі холостого ходу. В статье описаны результаты исследований показателей энергоемкости работы оригинального инерционного прямоточного сепаратора зерна оснащенного лопастным ротором. Теоретический анализ позволил установить, что одной из составляющих мощности холостого хода является коэффициент пропорциональности, учитывающий энергетику внутренних процессов. Проведенные экспериментальные исследования позволили получить зависимости приводной мощности и коэффициента пропорциональности от параметров лопастного ротора центробежного прямоточного сепаратора зерна в режиме холостого хода. The article describes the results of studies on the energy intensity of the work of the original inertial direct-flow grain separator equipped with a spindle rotor. An important part of the work of grain cleaning machines is the energy performance. They affect the cost of the final product. The energy of classical separators is sufficiently studied, but the creation of fundamentally new structures requires research. Therefore, the establishment of the power of the drive of the working bodies is an urgent task. The construction of an original centrifugal direct-flow grain separator was created at the Department of Agricultural Engineering of the Kirovohrad National Technical University. The machine allows air and grinding of grain to be cleaned. It is based on an original blade rotor, which performs several functions - air flow, acceleration of grain, cleaning of sieve openings and unloading of a clean product. An important characteristic of the separator is the idle speed. The theoretical analysis allowed to establish that one of its components is the coefficient of proportionality, which takes into account the energy of internal processes. Solving the problem was carried out on a laboratory experimental installation. The conducted empirical studies allowed to obtain the dependence of the drive power and the coefficient of proportionality on the parameters of the shaft rotor of the centrifugal direct-flow grain separator in idle mode. In particular, the following is established. The idle speed of the centrifugal grain separator increases parabolic with an increase in the angular velocity of the blade rotor, while the number of blades does not affect the power. The coefficient of proportionality, characterizing power in idle mode, decreases with increasing angular rotor speed. Increasing the number of blades also reduces the value of the proportionality factor. The obtained results will allow to calculate the parameters of centrifugal direct-current separators at the design stage and to evaluate the energy of already created machines. Determining other components of energy intensity requires further research.Item Суміщення технологічних операцій у виробництві олії(КНТУ, 2011) Васильковський, О. М.; Сало, В. М.; Петренко, М. М.; Васильковський, Я. С.; Vasilkovskiy, O.; Salo, V.; Petrenko, M.; Vasilkovskiy, Y.В статті наводиться один з варіантів удосконалення технологічної лінії по виробництву олії з термічною обробкою насіння соняшнику, перевагою якого є суттєве зменшення металоємності, енергоємності та габаритів пневморешітного сепаратора. Вказаний ефект досягається завдяки використанню оригінального робочого органу, що дозволяє реалізувати суміщення кількох технологічних операцій. The article provides an option to improve the technological line for production of oil from heat treatment of sunflower seeds, the advantage of which is a significant reduction in metal, energy and dimensions pneumatic-grate separator. The indicated effect is achieved by using the original working body to implement the combination of several technological operations.