Конструювання, виробництво та експлуатація сільськогосподарських машин. Загальнодержавний міжвідомчий науково-технічний збірник.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/19
Ідентифікатор медіа: R30-03925 (рішення Національної ради України від 25.04.2024 р. № 1418).
Мови видання: українська, російська, англійська, періодичність - один раз на рік.
Browse
Search Results
Item 3D модель для исследования динамики центробежной соковыжималки с шаровым автобалансиром(КНТУ, 2013) Гончаров, В. В.; Филимонихин, Г. Б.; Гончаров, В. В.; Філімоніхін, Г. Б.; Goncharov, Valeriy; Filimonikhin, GennadyСоздана 3D модель центробежной соковыжималки с цилиндрическим ситом и шаровым автобалансиром для ее уравновешивания на ходу в САПР SolidWorks. С использованием модуля Cosmos Motion проведена обработка, наладка и тестирование модели. Модель предназначена для исследования динамики машины, проведения виртуальных многофакторных экспериментов. Створена 3D модель відцентрової соковижималки з циліндричним ситом і кульовим автобалансиром для її зрівноваження на ходу в САПР SolidWorks. З використанням модуля Cosmos Motion проведено обробку, налагодження і тестування моделі. Модель призначена для дослідження динаміки машини, проведення віртуальних багатофакторних експериментів. In the process of work of electric centrifugal juicers (juicers) with the cylindrical sieve the pulp is distributed non-uniformly on a sieve which causing a significant imbalance and vibration of machine case. To balance these juicers on the go in the operation the authors propose their modernization which consists in replacing the standard platform for mounting the sieve by platform combined with ball auto-balancer. In order to study the process of balancing by auto-balancer of juicer’s cylindrical sieve created its 3D model with using the CAD system SolidWorks and its module Cosmos Motion. The simulation was performed in a technique that can be adopted as the standard for modeling process-balancing in rotor systems. It includes the steps of: 1) creation of models of details of a juicer in SolidWorks; 2) union of details in assembly; 3) kinematic and power processing of assembly by the Cosmos Motion module; 4) choice of criteria of quality of operation of the auto-balancer and juicer (the value of the module of residual acceleration of the case, time of onset of auto-balancing etc.); 5) adjustment of the model (the values of its parameters are selected in maximum accordance with the real machine); 6) the choice of model parameters; 7) test of the model of elementary tasks, the results of which are known or can be easily interpreted. The model of a juicer created by the offered technique is efficient and provides high speed of calculations. Its key parameters correspond to a natural juicer with the ball-type auto-balancer. By means of the created model it is possible to make fully - factorial and multiple-factorial experiments, in particular – with 2-levels, 3-levels, for search of optimum values of parameters of a juicer with the auto-balancer.Item Технічні рішення із зрівноваження на ходу екстракторів відцентрових соковижималок(КНТУ, 2013) Гончаров, В. В.; Філімоніхін, Г. Б.; Goncharov, Valery; Filimonikhin, GennadyВикладені технічні рішення із зрівноваження на ходу кульовими автобалансирами різної конструкції екстракторів (у вигляді циліндричного фільтра-сита) відцентрових соковижималок. Розглянутий процес модернізації соковижималок, принцип дії пристроїв. It is offered to counterbalance under way by ball-type auto-balancer of a different design extractors (in the form of cylindrical sieve) of centrifugal juicers. In article the short review of juicers with an extractor in the form of the cylindrical filter sieve is made, the principle of their work is described. The main problem arising in the course of work of such juicers – emergence of an imbalance and vibrations is specified. For their reduction it is offered to modernize juicers replacement in them one detail. Instead of a serial platform on which the extractor is established, it is offered to use a platform combined with a ball-type auto-balancer. Various technical solutions, principle of operation of auto-balancer are considered at an extractor equilibration. For modernization it is best of all to use Thearle's ordinary ball-type auto-balancer and ball-type autobalancer with mobile and motionless partitions.Item Комп’ютерна модель процесу автоматичного динамічного зрівноваження двома автобалансирами крильчатки осьового вентилятора(КНТУ, 2013) Олійниченко, Л. С.; Філімоніхін, Г. Б.; Olijnichenko, Lubov; Filimonikhin, GennadyУ САПР SolidWorks модернізовано 3D модель осьового вентилятора з автобалансиром у обтічнику встановленням другого автобалансира на хвостовик вала електродвигуна. Із використанням модуля Cosmos Motion проведено обробку, налагодження і тестування моделі. Модернізована 3D модель призначена для комп’ютерного моделювання процесу динамічного зрівноваження крильчатки з ротором електродвигуна двома автобалансирами. We study the process of dynamic balancing of the axial fan impeller by two ball auto-balancers whis using SolidWorks CAD software and its module Cosmos Motion. For this were upgraded computer model of an axial fan with ball auto-balancer in the radome of fan by installing a second auto-balancer on a shaft of the engine. Thus with the help of CAD SolidWorks were created the parts of second auto-balancer and added to the assembly. With the module Cosmos Motion were set kinematic relations and interaction force between the parts of the new auto-balance. Debugging and testing of a computer model was conducted of elementary problems whose solutions are known and the simulation results are easily interpreted. As a result the resulting model is the computer analog of the full-scale stand with the same characteristics. It is suitable for the virtual multi- factorial and full- factorial experiments to select the optimal parameter values of fan and auto-balancers. With using of the created model were investigated the effect of gravity and the parameters of an imbalance in the auto-balancing process.