Збірник наукових праць КНТУ. Техніка в сільськогосподарському виробництві, галузеве машинобудування, автоматизація.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/18
Свідоцтво про державну реєстрацію у Міністерстві юстиції України: серія КВ, №15253-3825 ПР.
Затверджено наказом Міносвіти і науки України № 1528 від 29.12.14р.
ISSN 2409-9392 (Online) 2409-9392(Print)
Мови видання: українська, російська, англійська, періодичність - один раз на рік;
Browse
5 results
Search Results
Item Використання осіннього листя для виготовлення альтернативних видів палива(КНТУ, 2013) Боков, В. М.; Попова, М. І.; Лисенко, Р. С.; Bokov, V.; Popova, M.; Lysenko, R.Розроблено маловитратну технологію пресування брикетів із осіннього листя, та вперше запропоновано, досліджено і розроблено технологію прямого видавлювання із них пеллет. The objective of the work is the elaboration of low-cost technology of making firewood (briquettes and pellets) of fallen leaves without adding other material, particularly wax. The article presents the results of experimental research of the process of production of firewood using fallen leaves, which include the following stages: - for producing pellets: collection of leaves; grinding leaves; pressing-out pellets and modeling the process; test on burning of some pellets and modeling the process; test on burning of the group of pellets; - for briquettes: collection of leaves; grinding leaves; pressing briquettes and determination of effort of deformation; test on burning of some briquettes. Conclusion: - the technology of pressing briquettes of autumn leaves was improved due to the development of low-cost technology of pressing without adding other material, particularly wax, which allows to lower the price in 90…100 times; - the technology of direct pressing-out of pellets of autumn leaves was suggested, studied and developed for the first time.Item Удосконалення розмірної обробки твердосплавних прокатних валків біполярним інструментом(КНТУ, 2010) Боков, В. М.; Сіса, О. Ф.; Попова, М. І.; Bokov, V.; Sisa, O.; Popova, M.Запропоновано та розроблено новий спосіб розмірної обробки твердосплавних валків біполярним інструментом, що дозволяє виконувати одночасну обробку двох деталей за один хід шпинделя з прогнозованим зніманням з них різних припусків. При цьому цикл обробки зменшується в 2,0 – 2,5 рази. A new method of dimensional processing of hardmetal rolls with bipolar tool is suggested and worked out. It allows to execute concurrently the processing of two details for one spindle travel with predictable excess material beveling. At that processing cycle is lessening as 2,0 – 2,5 times.Item Гідродинаміка процесу біполярної обробки електричною дугою двох твердосплавних валків(КНТУ, 2012) Боков, В. М.; Сіса, О. Ф.; Попова, М. І.; Bokov, V.; Sysa, О.; Popova, М.Запропоновано принцип активного керування гідродинамічним режимом потоку в торцевому зазорі при біполярної обробки дугою двох твердосплавних валків. The principle of active control hydrodynamic mode of the flow in the end clearance under the conditions of bipolar treatment by electric arc of two hard-alloyed rolls was proposed.Item Фізичний механізм формування електричною дугою шорсткості бічної поверхні(КНТУ, 2011) Боков, В. М.; Попова, М. І.; Bokov, V.; Popova, M.Досліджено та описано фізичний механізм формування електричною дугою шорсткості бічної поверхні електрода-заготовки в умовах варіювання кута нахилу твірної бічної поверхні електрода-інструмента. Physical mechanism of lateral surface roughness forming of electrode-billet in the conditions of inclination variation of lateral surface generatrix of electrode-instrument is studied and described.Item Інтенсифікація обробки фасонних порожнин(КНТУ, 2009) Боков, В. М.; Попова, М. І.Запропоновано високоефективний метод розмірної обробки дугою торцевих поверхонь складного рельєфу двошаровими електродами-інструментами. A high-performance method of dimensional arc processing of intricate profile faceplates based on using two-ply tool electrodes is introduced.