Збірник наукових праць КНТУ. Техніка в сільськогосподарському виробництві, галузеве машинобудування, автоматизація.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/18
Свідоцтво про державну реєстрацію у Міністерстві юстиції України: серія КВ, №15253-3825 ПР.
Затверджено наказом Міносвіти і науки України № 1528 від 29.12.14р.
ISSN 2409-9392 (Online) 2409-9392(Print)
Мови видання: українська, російська, англійська, періодичність - один раз на рік;
Browse
5 results
Search Results
Item Теоретичне дослідження розрідження пісків односпірального класифікатора джерелом з незмінною витратою води(КНТУ, 2013) Кондратець, В. О.; Сербул, О. М.; Kondratets, V.; Serbul, A.Приведені результати теоретичного дослідження розрідження пісків односпірального класифікатора джерелом з незмінною витратою води. Встановлено, що, враховуючи особливості роботи технологічної схеми, можливо застосувати джерело подачі води у пісковий жолоб класифікатора з незмінною і обґрунтованою продуктивністю. The aim is to establish the possibility of filing a constant flow of water in a sand trough classifier with stabilization diluting the slurry in a ball mill that grinds the sand with the base ore. The possibility of stabilizing the flow of water in the gutter sand one scroll classifier with stabilization diluting the slurry in a ball mill that grinds the sand along with the base ore. Using the proposed approach and analytical expressions can in almost any operating conditions justify the fixed cost of water in the gutter sand one scroll classifier, where a broad range of flow ore ball mill, its density and the circulating load for reliable transport of slurry and liquefaction of production vessels. The implementation of this approach to improve the accuracy of identification ratio ore/water in a ball mill by eliminating transaction flow measurement in sand trough and effect of the transport delay.Item Дослідження нелінійної системи автоматичного управління подачею води у кульовий млин, що подрібнює піски класифікатора(КНТУ, 2013) Мацуй, А. М.; Кондратець, В. О.; Matsui, A.; Kondratets, V.Обґрунтована функціональна схема системи автоматичного управління подачею доданої води у кульовий млин, що подрібнює піски двоспірального класифікатора, та її складові елементи. Показано, що вона повинна містити обчислювальний блок, який формує змінне задаюче діяння на витрату доданої води, та ідеалізований елемент, що спрацьовує при занадто низьких рівнях вхідного сигналу і має характеристику без гістерезису. The aim is to study the automatic control system of water supply in a ball mill that grinds the sand classifier. It is shown that the stabilization of dilution of the pulp in a ball mill, which grinds sands double-qualifier is necessary to organize an incomplete invariant ratio control solid / liquid in the receiver cochlear feeder and final input to the ball mill feed into the neck of a small amount of water. Proposed a non-linear system of automatic control supply of water added to the ball mill containing idealized relay element and a computer unit, which in terms of the pulp and the actual ratio of solid / liquid in the receiver cochlear feeder, set ratio solid / liquid and the density of the ore forming variable sets the effect on water consumption. Idealized relay element and computing unit implemented in the controller. Idealized relay element operates at extremely low levels of the input signal and has the feature without hysteresis. The proposed automatic control system is stable and has high quality.Item Обґрунтування типу і дослідження вторинного перетворювача системи ідентифікації завантаження кульового млина рудою(КНТУ, 2011) Карчевська, М. О.; Кондратець, В. О.; Karchevskaya, M.; Kondratets, V.У статті обґрунтовано вибір магнітоіндукційного перетворювача у якості вторинного системи ідентифікації завантаження кульового млина рудою. В процесі теоретичних досліджень встановлено, що магнітоіндукційний перетворювач, який працює на принципі зміни проміжку між пружною пластиною і полюсними наконечниками біля повітряного зазора між ними, має суттєву нелінійність статичної характеристики. Це не дозволяє реалізувати даний тип перетворювача. Е.р.с. магнітоіндукційного перетворювача з паралельним переміщенням пластини відносно повітряного зазора має лінійну статичну характеристику і його доцільно реалізувати в системі ідентифікації завантаження кульового млина рудою. In the article the choice of magnetic inductions transformer is grounded as the second systems of authentication of load of ball mill ore. It is set in the process of theoretical researches, that a magnetic inductions transformer which works on principle of change of interval between a resilient plate and pole tips near an air-gap between them has essential non-linearity of static description. It does not allow realizing this type of transformer. E.m.f. magnetic inductions transformer with the parallel moving of plate in relation to an air-gap has linear static description and it is expedient to realize it in the system of authentication of load of ball mill ore.Item Теоретичне дослідження динаміки САР розрідження пульпи в млинах з циркулюючим навантаженням(КНТУ, 2011) Кондратець, В. О.; Сербул, О. М.; Kondratets, V.; Serbul, A.В статті приведені результати теоретичних досліджень динаміки системи автоматичного регулювання розрідження пульпи в млинах з циркулюючим навантаженням. Показано, що розроблена система є стійкою при вибраних параметрах лінійної та нелінійної частини, автоколивання в якій не можливі. Запропонований ідеальний релейний елемент, що може спрацьовувати і відпускати при різниці в сигналах всього на 1,0 % від заданого значення співвідношення руда/вода, забезпечує високу якість автоматичного регулювання. Система забезпечує найкращу якість при максимально можливому в ній передавальному відношенні редуктора виконавчого механізму, що дорівнює 0,02. In the article are рresented results over of theoretical researches of dynamics the system of automatic control dilution of pulp in mills with the circulatory loading. It is shown that the worked out system is steady at the chosen parameters of linear and nonlinear part, self-excited oscillations in which are impossible. The offered ideal relay element which can work and release at a difference in signals only on 1,0 % from the set value of correlation ore/water, provides high quality of automatic control. The system provides the best quality at the maximally possible in her transmission relation of reducing gear of executive mechanism which is evened 0,02.Item Ідентифікація співвідношення руда/вода в приймальному пристрої завиткового живильника як регульованому об’єкті(КНТУ, 2011) Мацуй, А. М.; Кондратець, В. О.; Matsuy, A.; Kondratets, V.У статті приведені конструкція блока перетворювачів тиску пульпи та функціональна схема інформаційного блока розробленого засобу ідентифікації співвідношення руда/вода в приймальному пристрої завиткового живильника. Наведені конструктивні дані, складові апаратури, параметри фільтрування сигналів. In the article the construction of block of transformers pulp and functional diagram of informative block of the developed mean of identification of ratio is resulted ore/water in the snail feeder’s takers-off. Structural information, making apparatuses, parameters of filtration of signals, is resulted.