Випускні кваліфікаційні роботи
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/763
Browse
2 results
Search Results
Item Дослідження впливу складу, температури модифікування та структури ковкого чавуну на його механічні властивості(ЦНТУ, 2025-01-02) Лисенко, Андрій Якович; Lysenko, AndriiМетою дослідження є вивчення впливу хімічного складу, температури модифікування та структури на механічні властивості виливків із ковкого чавуну. Дослідження виконувалось методами математичної статистики – перевірка гіпотези про підпорядкування вибірки нормальному закону розподілу, кореляційним і регресійним аналізом в середовищі Місrosoft Offis Excel та MathCAD. Отримані дані з метою встановлення степені достовірності досліджуваних залежностей механічних властивостей за допомогою перевірки гіпотези нормального розподілу міцносних показників та структури. Побудовані гістограми розподілу значень механічних властивостей та структури (твердості, межи міцності, діаметра графітних включень, числа графітних включень, кількості перліту, розміру зерна фериту). Встановлена тіснота зв’язку між досліджуваними відповідними параметрами, встановлено також характер впливу вуглецю, кремнію, сірки на механічні властивості ковкого чавуну. Встановлений також оптимальний склад ковкого чавуну. З’ясовано, що вирішальний влив на механічні властивості має вуглець і кремній, а також структура чавуну. Отже, треба регулювати хімічний склад для поліпшення міцності і твердості виливків із ковкого чавуну. Запропоновано відповідно оптимальний склад ковкого чавуну для дослідження його міцносних властивостей. The aim of the study is to investigate the influence of chemical composition, temperature modification and structure on the mechanical properties of ductile iron castings. The study was carried out using the methods of mathematical statistics testing the hypothesis that the sample is subject to the normal law distribution, correlation and regression analysis in Microsoft Offis Excel and MathCAD. The data obtained in order to establish the degree of reliability of the studied dependencies of mechanical properties by testing the hypothesis of normal distribution of strength and structure. Histograms of the distribution of values of mechanical properties and structure (hardness, tensile strength, diameter of graphite inclusions, number of graphite inclusions, the number of pearlite, and ferrite grain size). It was established the closeness of the relationship between the studied relevant parameters, and also the nature of the influence of carbon, silicon, and sulfur on the mechanical properties of of ductile iron. The optimal composition of ductile iron was also determined. It was found that carbon and silicon, as well as the structure of the cast iron, have a decisive influence on the mechanical properties. Therefore, it is necessary to adjust the chemical composition to improve the strength and hardness of ductile iron castings. Accordingly, the optimal composition of ductile iron is proposed for to study its strength properties.Item Математичне моделювання процесів нагрівання виливків у печі при граничних умовах третього роду(ЦНТУ, 2024-01-18) Рахуба Михайло Васильович; Rakhuba MykhailoМетою дослідження є розроблення простого для практичного використання методу розрахунку нагрівання виливків нестаціонарної теплопровідності при граничних умовах третього роду для тіл складної форми. Методи дослідження: метод Фур'є, критеріальні методи розв'язку, метод кінцевих різниць, метод нагрівання тонких тіл, наближений метод нагрівання і наближені формули розрахунку нагрівання металу в середовищі MathCAD. Запропоновано простий метод розрахунку нагрівання виливків при нестаціонарній теплопровідності для тіл складної форми. Виведено співвідношення m = 1 + kBi і визначено коефіцієнт пропорційності k. Виконані приклади практичного використання методу: розрахунки нагрівання «тонких» тіл; розрахунки нагрівання «масивних» тіл; розрахунок часу нагрівання виливків. Показано, що практичні розрахунки адекватно співставляються з експериментальними даними як для «тонких», так і для «масивних» тіл складної форми. Розроблено простий для практичного використання метод розрахунку нагрівання виливків нестаціонарної теплопровідності при граничних умовах третього роду для тіл складної форми. The purpose of the study is to develop a simple for practical use method of calculating the heating of castings of non-stationary thermal conductivity under boundary conditions of the third kind for bodies of complex shape Research methods: the Fourier method, criterion methods of tying, the finite difference method, the method of heating thin bodies, the approximate method of heating, the approximate Weinik method and approximate formulas for the calculation of metal heating in MathCAD. A simple method for calculating the heating of castings with non-stationary thermal conductivity for bodies of complex shape is proposed. The relationship m=1+kBi and the definition of the proportionality factor k are derived Completed examples of practical use of the method: calculations of heating of "thin" bodies; heating calculations of "massive" bodies; calculation of the heating time of castings. It is shown that practical calculations are adequately compared with experimental data for both "thin" and "massive" bodies of complex shape. A simple for practical use method of calculating the heating of castings of unsteady thermal conductivity under boundary conditions of the third kind for bodies of complex shape has been developed