Випускні кваліфікаційні роботи
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/763
Browse
Search Results
Item Дослідження впливу складу, температури модифікування та структури ковкого чавуну на його механічні властивості(ЦНТУ, 2025-01-02) Лисенко, Андрій Якович; Lysenko, AndriiМетою дослідження є вивчення впливу хімічного складу, температури модифікування та структури на механічні властивості виливків із ковкого чавуну. Дослідження виконувалось методами математичної статистики – перевірка гіпотези про підпорядкування вибірки нормальному закону розподілу, кореляційним і регресійним аналізом в середовищі Місrosoft Offis Excel та MathCAD. Отримані дані з метою встановлення степені достовірності досліджуваних залежностей механічних властивостей за допомогою перевірки гіпотези нормального розподілу міцносних показників та структури. Побудовані гістограми розподілу значень механічних властивостей та структури (твердості, межи міцності, діаметра графітних включень, числа графітних включень, кількості перліту, розміру зерна фериту). Встановлена тіснота зв’язку між досліджуваними відповідними параметрами, встановлено також характер впливу вуглецю, кремнію, сірки на механічні властивості ковкого чавуну. Встановлений також оптимальний склад ковкого чавуну. З’ясовано, що вирішальний влив на механічні властивості має вуглець і кремній, а також структура чавуну. Отже, треба регулювати хімічний склад для поліпшення міцності і твердості виливків із ковкого чавуну. Запропоновано відповідно оптимальний склад ковкого чавуну для дослідження його міцносних властивостей. The aim of the study is to investigate the influence of chemical composition, temperature modification and structure on the mechanical properties of ductile iron castings. The study was carried out using the methods of mathematical statistics testing the hypothesis that the sample is subject to the normal law distribution, correlation and regression analysis in Microsoft Offis Excel and MathCAD. The data obtained in order to establish the degree of reliability of the studied dependencies of mechanical properties by testing the hypothesis of normal distribution of strength and structure. Histograms of the distribution of values of mechanical properties and structure (hardness, tensile strength, diameter of graphite inclusions, number of graphite inclusions, the number of pearlite, and ferrite grain size). It was established the closeness of the relationship between the studied relevant parameters, and also the nature of the influence of carbon, silicon, and sulfur on the mechanical properties of of ductile iron. The optimal composition of ductile iron was also determined. It was found that carbon and silicon, as well as the structure of the cast iron, have a decisive influence on the mechanical properties. Therefore, it is necessary to adjust the chemical composition to improve the strength and hardness of ductile iron castings. Accordingly, the optimal composition of ductile iron is proposed for to study its strength properties.Item Дослідження впливу структури на відносне подовження ковкого чавуну(ЦНТУ, 2025-01-02) Миронов, Денис Сергійович; Myronov, DenysМета дослідження це вивчення впливу структури на відносне подовження ковкого чавуну. Дослідження проводились відповідно методами математичної статистики – перевірка кореляційним аналізом в середовищі Місrosoft Offis Excel та MathCAD. В роботі отримані дані з метою встановлення степені достовірності досліджуваних залежностей відносного подовження від показників та структури ковкого чавуну. Виконані дослідження впливу діаметра графітних включень на відносне подовження ковкого чавуну; кількості виділень графіту на відносне подовження ковкого чавуну; впливу розміру феритного зерна на відносне подовження ковкого чавуну; впливу міцність ковкого чавуну на його відносне подовження. Отримано рівняння множинної кореляції залежності відносного подовження від структури ковкого чавуну. З’ясовано, що при числі графітних включень менше 50 штук на 1 мм 2 шлифа зі збільшенням числа графітних включень збільшується і відносне подовження. З підвищенням вмісту перліту у ковкому чавуні відносне подовження зменшується. При зростанні розміру феритного зерна більше 45 мкм, відносне подовження феритного ковкого чавуну починає збільшуватися. Показано також, що зі збільшенням пластичності (%), міцність (В) феритного ковкого чавуну знижується. Встановлено, що між відносним подовженням ковкого чавуну і твердістю існує тісний лінійний зворотній кореляційний зв'язок, про що свідчить високе значення коефіцієнта кореляції (r = 0,3012). The purpose of the study is to study the effect of structure on the relative elongation of ductile iron. The research was conducted accordingly by the following methods mathematical statistics - checking by correlation analysis in Microsoft Offis Excel and MathCAD. The data obtained in this work were used to establish the degree of reliability of the of the studied dependences of relative elongation on the parameters and structure of ductile iron. The influence of the diameter of graphite inclusions on the relative elongation of ductile iron; the amount of graphite inclusions on the relative elongation of ductile iron; the effect of ferrite grain size on the relative elongation of ductile iron; influence of ductile iron strength on its relative elongation. The equation of multiple correlation of the dependence of of the relative elongation on the structure of ductile iron. It was found that when the number of graphite inclusions is less than 50 pieces per 1 mm 2 grind with an increase in the number of graphite inclusions, the relative elongation also increases. With an increase in the content of pearlite in ductile iron, the relative elongation decreases. When the ferrite grain size increases above 45 μm, the relative elongation of ferritic ductile iron begins to increase. It is also shown that with an increase in plasticity (%), strength (В) of ferritic ductile iron decreases. It was found that there is a close linear relationship between the relative elongation of ductile iron and hardness there is a close linear inverse correlation, as evidenced by the high value of the correlation coefficient is evidenced by the high value of the correlation coefficient (r = 0.3012).