Центральноукраїнський науковий вісник. Технічні науки.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/9042
Ідентифікатор медіа: R30-03350 (рішення Національної ради України від 25.04.2024 р. № 1418).
ISSN 2664-262X (p)
DOI: 10.32515/2664-262X
Browse
2 results
Search Results
Item Зміна напружено-деформованого стану робочої поверхні деталі з антифрикційним покриттям(ЦНТУ, 2025) Шепеленко, І. В.; Красота, А. М.; Красота, М. В.; Shepelenko, I.; Krasota, A.; Krasota, M.В статті за допомогою моделювання виконані дослідження закономірностей змін параметрів напружено-деформованого стану на робочій поверхні кулачка розподільного валу ДВЗ. При побудові моделі враховані конструктивні особливості розподільного валу, умови роботи з’єднання «кулачок–штовхач», сили, що діють в газорозподільному механізмі в момент відкривання клапана. Для адекватного відтворення навантажень в деталях досліджуваного вузла створена скінчено-елементна модель розподільного вала, який контактує опорними шийками з втулками, а кулачком – з одним із штовхачів. Результати розрахунків підтвердили, що саме в зоні контакту «кулачок–штовхач» спостерігаються максимальні значення напружень. Для визначення шляхів покращення експлуатаційних властивостей робочих поверхонь кулачків дослідженні параметри напружено-деформованого стану базового кулачка, а також кулачка з антифрикційним покриттям, нанесеним фінішною антифрикційної безабразивною обробкою. Якісний та кількісний аналіз напружень в зоні контакту «кулачок–штовхач» дозволив встановити, що розподільний вал з кулачком, що має антифрикційне покриття, сприймає менші силові напруження ніж з кулачком базового виконання, а отже, буде піддаватися меншому зношуванню. Отримані закономірності дозволяють стверджувати про доцільність ФАБО кулачків з метою підвищення довговічності розподільного валу. The article deals with the issue of increasing the durability of the camshaft of an internal combustion engine by improving the operational properties of cams. It is determined that by studying the stress-strain state of individual elements of a part, it is possible to solve a number of technological problems. Taking into account that in most cases the destruction of a part begins from its surface, the stress-strain state of the surface layer has a significant impact on the operational properties of parts. The study of the parameters of the stress-strain state on the working surface of the cam of the camshaft of an internal combustion engine was carried out by modelling using the finite element method. The model takes into account the design features of the camshaft, the operating conditions of the campusher connection, and the forces acting in the gas distribution mechanism at the moment of valve opening. To adequately reproduce the loads in the details of the studied assembly, a finite element model of the camshaft was created, with the camshaft journals in contact with the bushings and the cams in contact with one of the pushrods.Item Зміцнення деталей з алюмінієвих сплавів мікродуговоговим оксидуванням(ЦНТУ, 2021) Кулєшков, Ю. В.; Красота, М. В.; Руденко, Т. В.; Осін, Р. А.; Крошка, В. Д.; Kuleshkov, Yu.; Krasota, M.; Rudenko, T.; Osin, R.; Kroshka, V.У статті наведено результати аналізу можливості використання нового способу зміцнення робочих поверхонь деталей – мікродугового оксидування для підвищення зносостійкості робочих поверхонь деталей, виготовлених з алюмінієвих сплавів, зокрема корпусів шестеренних насосів типу НШ. У роботі викладена сутність процесу зміцнення деталей мікродуговим оксидуванням, представлені основні фізико-механічні характеристики зміцнюючого покриття. Відзначено, що міцність зчеплення і механічні властивості покриття багато в чому залежать від стану зміцнюючої поверхні, зокрема від методу попередньої обробки. При цьому встановлено, що зміцнюючі покриття металу після пластичного деформування мають більшу міцність зчеплення, більшу товщиною і твердістю. Представлені основні відомості про мікродугове оксидуванні, які на думку авторів будуть сприяти освоєнню маловивченого способу зміцнення в ремонтному виробництві. The purpose of the research is to analyze the scientific and technical information to determine the possibility of strengthening the parts of aluminum alloys by microarc oxidation, in particular gear pump housings. The article presents the results of the analysis of possibility of using a new method of hardening roboczych surfaces - micro-arc oxidation to enhance the wear resistance of working surfaces of parts made of aluminum alloys, in particular housings, gear pumps NSH. The paper describes the essence of the process of hardening parts by microarc oxidation, presents the main physical and mechanical characteristics of the hardening coating. It is noted that the adhesion strength and mechanical properties of the coating largely depend on the state of the surface to be strengthened, in particular, on the method of pretreatment. At the same time, it was found that the strengthening coating of the metal after plastic deformation has a greater adhesion strength, greater thickness and hardness. The paper presents the basic information about microarc oxidation, which, according to the authors, will contribute to the development of the method in the poorly studied method of hardening in repair production. It can be concluded that the ceramic coatings obtained by microarc oxidation can be recommended for the restoration and strengthening of aluminum parts of gear pumps, in particular the pump housing.