Центральноукраїнський науковий вісник. Технічні науки.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/9042
Ідентифікатор медіа: R30-03350 (рішення Національної ради України від 25.04.2024 р. № 1418).
ISSN 2664-262X (p)
DOI: 10.32515/2664-262X
Browse
2 results
Search Results
Item Стійкість до вилягання і забур’яненість стеблостою льону-довгунця з урахуванням густоти посівів перед збиранням(ЦНТУ, 2023) Лімонт, А. С.; Лімонт, З. А.; Limont, А.; Limont, Z.Стійкість стеблостою до вилягання і його забур’яненість розглянути як фактори механізованого виробництва льону-довгунця, що формують екологоспрямоване готування і збирання рошенцевої льонотрести. Мета роботи полягала в дослідженні впливу густоти стеблостою льону-довгунця перед збиранням на стійкість його до вилягання і забур’яненість, а також з’ясуванні густоти посівів в передзбиральний період, яка уможливлює застосування засобів механізації на бранні рослин льону- довгунця і очісуванні стебел, їх розстиланні, підніманні стрічки льонотрести, формуванні її упаковок, їх навантажуванні та транспортуванні. Між стійкістю стеблостою льону-довгунця до вилягання і густотою стеблостою з урахуванням різних експериментальних даних виявлений від’ємний кореляційний зв’язок з коефіцієнтами кореляції мінус 0,460 і мінус 0,597 за кореляційних відношень стійкості стеблостою до вилягання на густоту стеблостою відповідно 0,703 і 0,652. Від’ємний кореляційний зв’язок виявлений і між забур’яненістю стеблостою, кількістю, а також щільністю бур’янів в ньому і густотою стеблостою з визначенням відповідних парних оцінних показників цього кореляційного зв’язку. Знайдені рівняння спадних гіпербол кількісної зміни результативних ознак залежно від факторіальної. Resistance of stalks to lodging and its weediness should be considered as factors of mechanized production of long flax, which form environmentally friendly preparation and harvesting of Roshen flaxseed. The aim of the study was to study the effect of stem density of long flax before harvesting on its resistance to lodging and weeding, as well as to determine the density of crops in the pre-harvest period, which allows the use of mechanization in harvesting long flax plants and combing stems, their spreading, lifting the flaxseed tape, forming its packaging, loading and transportation. Some of the results of experimental research of a number of scientists on the study of agricultural techniques and measures for the cultivation of flax and the materials of their own research and their generalization were used as initial data. The method of processing the initial data is based on correlationregression analysis, based on the size of statistical samples used to determine the estimated indicators of qualitative and quantitative relationship of the studied results and factorial features of the processed correlation series and correlation tables. The range of variation of the studied features, the arithmetic mean and the standard deviation and coefficients of variation were determined. The search for the prognostic function was carried out by equalizing the experimental values of the performance traits depending on the factorial rectilinear and a number of curvilinear dependences with the calculation of the corresponding estimates of alignment, errors of regression equations and determination of the coefficient of determination. A negative correlation with the correlation coefficients of minus 0.460 and minus 0.597 was found between the resistance of the flax stalk to lodging and the density of the stalk, taking into account various experimental data, with correlations of the resistance of the stalk to lodging to the density of the stalk, respectively, 0.503 and 0.62, respectively. A negative correlation was also found between the weediness of the stem, the number and density of weeds in it and the density of the stem, with the determination of the corresponding paired estimates of this correlation. The equations of descending hyperbolas of quantitative change of effective signs depending on factorial are found.Item Об’єм кузова машин для внесення твердих органічних добрив та їх габаритні розміри(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, А.; Limont, Z.Мета статті полягала в дослідженні і з’ясуванні кількісної зміни об’єму кузова машин для внесення твердих органічних добрив як результативної ознаки залежно від їх габаритних розмірів, як факторіальних ознак. Досліджена і зміна габаритних довжини, ширини та висоти машин залежно від об’єму їх кузова. Об’єм кузова машин та їх габаритна висота є одними з параметрів кузовних машин, які використовують для розрахунку навантажувального забезпечення технологічного процесу внесення твердих органічних добрив. Дослідження і з’ясування відповідних парних зв’язків параметрів машин здійснені з використанням методів кореляційно-регресійного аналізу та стандартних комп’ютерних програм. Зміна об’єму кузова від габаритної довжини машини, об’єму кузова від висоти машин і навпаки габаритних довжини та висоти машин залежно їх об’єму описується прямими з додатними кутовими коефіцієнтами. Зміна об’єму кузова залежно від габаритної ширини машин також описується прямою з додатним кутовим коефіцієнтом, а зміну габаритної ширини машини залежно від об’єму кузова краще описати сповільнено зростаючою степеневою функцією. Опрацьовані модельні лінії прямолінійної регресії більшості результативних ознак на факторіальні і криволінійної регресії габаритної ширини машин на об’єм кузова. Along with other agronomic techniques and measures to increase soil fertility, a significant role belongs to the application of solid organic fertilizers. Among the technical means used to apply such fertilizers, an important place is occupied by body machines. The purpose of the article was to study and clarify the quantitative change in the volume of the body of such machines as a productive feature depending on their dimensions, as factorial features. The change of overall length, width and height of cars depending on the volume of their body is also investigated. The volume of the body of machines and their overall height are one of the parameters of body machines, which are used to calculate the load support of the technological process of solid organic fertilizers. Investigations and elucidation of the corresponding pairwise relationships of machine parameters were performed using correlation-regression analysis methods using standard computer programs. The statistical reconciliation included 47 brands of body machines for the application of solid organic fertilizers produced by enterprises in the former Soviet Union, “KUHN” and “Strautmann”. Empirical distributions of the investigated parameters of body machines for application of solid organic fertilizers are processed. The range of variation of parameters, arithmetic mean values and standard deviations and coefficients of variation of empirical distributions of parameters of these machines are determined. Between the studied resultant and factorial traits, a positive correlation was found with correlation coefficients in the range from 0.523 to 0.893 with correlation ratios of the resultant traits to factorial ones, which took values from 0.611 to 0.899. The closest relationship was found between the volume of the body and the overall length of the cars. The change in body volume from the overall length of the car, body volume from the height of the car and vice versa overall length and height of the car depending on their volume is described by straight lines with positive body coefficients. The change in body volume depending on the overall width of the machine is also described as a straight line with a positive angular factor, and the change in the overall width of the machine depending on the body volume is better described by a slowly increasing power function. The model lines of rectilinear regression of the majority of effective signs on factorial and curvilinear regression of overall width of cars on body volume are developed. If the last change is given by the equation of increasing hyperbola (R2 = 0.311), as a partial case of slowly increasing power function, then the asymptote of the hyperbola can be determined with the estimated maximum overall width of body machines for solid organic fertilizers, which should be 2745 mm.