Центральноукраїнський науковий вісник. Технічні науки.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/9042
Ідентифікатор медіа: R30-03350 (рішення Національної ради України від 25.04.2024 р. № 1418).
ISSN 2664-262X (p)
DOI: 10.32515/2664-262X
Browse
Search Results
Item Температурний режим експлуатації будівель на території Кіровоградської області(ЦНТУ, 2019) Семко, В. О.; Пашинський, В. А.; Джирма, С. О.; Пашинський, М. В.; Семко, В. О.; Пашинский, В. А.; Джирма, С. А.; Пашинский, М. В.; Semko, V.; Pashinskyi, V.; Dzhyrma, S.; Pashynskyi, M.Реалізована методика площинної апроксимації для визначення розрахункових параметрів температури повітря в заданій географічній точці. Дані довколишніх метеостанцій в радіусі 200…250 км описуються рівнянням площини, побудованим за методом найменших квадратів, з якого визначається величина розрахункового параметра. За даними ДСТУ "Будівельна кліматологія" отримані рівняння, які дозволяють обчислювати 25 розрахункових параметрів температури повітря в довільній точці Кіровоградської області. Реализована методика плоскостной аппроксимации для определения расчетных параметров температуры воздуха в заданной географической точке. Данные близлежащих метеостанций в радиусе 200...250 км описываются уравнением плоскости, построенным по методу наименьших квадратов, из которого определяется величина расчетного параметра. По данным ДСТУ "Строительная климатология" получены уравнения, позволяющие вычислять 25 расчетных параметров температуры воздуха в произвольной точке Кировоградской области. The article implements a method for determining the calculated air temperature parameters in a given geographical point of Ukraine using the planar approximation method, gives recommendations for a rational choice of a local network of weather stations, and also developed a simplified engineering method for determining the design air temperature parameters in the Kirovograd region. To determine the design parameters of climatic loads at a given design point, a simple and accurate plane interpolation method was chosen. The trends of territorial changes in air temperature parameters in the area of the design point are described by the planar equation constructed by the least squares method according to the data of nearby weather stations. In Microsoft Excel, 25 calculated parameters of air temperature (mean monthly and annual temperatures, temperatures of the coldest and warmest day and five days, mean temperatures and durations of the cold and hot period) are calculated for an arbitrary design point in Ukraine according to DSTU-N B V.1.1-27: 2010 "Construction climatology" [ДСТУ-Н Б В.1.1-27:2010 "Будівельна кліматологія"]. By the example of the six project points it is established that when determining the calculated parameters of the air temperature, the data of the local network of weather stations within the radius of 200 ... 250 km from the design point should be taken into account. According to a local network with 14 meteorological stations located in the territory of Kirovograd and nearby areas, equations were obtained for calculating 25 design air temperature parameters at an arbitrary point in Kirovograd region. The performed studies have confirmed the possibility of using the plane approximation method to determine the design parameters of the air temperature in a given design point of Ukraine according to DSTU-N B V.1.1-27: 2010 "Construction climatology". The rational size of the local network of weather stations was substantiated and the analytical dependences were obtained for determination of the design air temperature parameters in the territory of the Kirovograd region.Item Вагові характеристики та області раціонального використання сталевих балок у будівлях та конструкціях вантажопідйомних машин(ЦНТУ, 2019) Пашинський, В. А.; Скриннік, І. О.; Харченко, І. В.; Хачатурян, С. Л.; Пашинский, В. А.; Скрынник, И. О.; Харченко, И. В.; Хачатурян, С. Л.; Pashinskyi, V.; Skrynnik, I.; Kharchenko, I.; Khachaturian, S.За результатами експериментального проектування сталевих балок чотирьох типів виявлені та описані залежності їх маси від прольоту й діючого навантаження. Встановлено, що при малих навантаженнях і великих прольотах власна вага балок може перевищувати 20% корисного навантаження. Розроблені укрупнені розцінки на виготовлення та монтаж сталевих балок і колон різних типів. З урахуванням несучої здатності, металоємності та вартості надані рекомендації щодо раціонального використання балок різних типів. По результатам экспериментального проектирования стальных балок четырех типов выявлены и описаны зависимости их массы от пролета и действующей нагрузки. Выявлено, что при малых нагрузках и больших пролетах собственный вес балок может превышать 20% полезной нагрузки. Разработаны укрупненные расценки на изготовление и монтаж стальных балок и колонн различных типов. С учетом несущей способности, металлоемкости и стоимости даны рекомендации относительно рационального использования балок различных типов. The purpose of this work is to obtain dependencies for the preliminary determination of specific quantity of metal and loads from their weight of steel beams of different types, as well as outline the area of rational use of beams of the investigated types, taking into account the criteria of specific quantity of metal and their cost. Experimental design of steel beams of four types is performed: rolled I-beams, perforated steel beams, from the developed assortment of welded H-beams and welded H-beams of individual design. Beam spans varied from 3 m to 36 m, and the design values of the loads were set equal to 5...150 kN/m. The indicated limits are selected taking into account the possible use of beams in load-lifting machines design, roof designs of production and civil buildings, as well as restrictions of assortments of I-beams. For beams of four types the areas of rational use according to criteria of durability and rigidity are defined. By analytical equations detected and described the dependence on the mass of projected beams to span and load. It is shown that for small loads and large spans, the own weight of beams can exceed 20% of the payload. The enlarged prices for manufacturing and installation of steel beams and columns of various types are developed. The presentation of weight characteristics and prices in the form of dependencies of the main constructive factors allows to estimate the specific quantity of metal and the cost of beams of different types before their designing. The recommendations are given for rational use of beams of different types, taking into account their load-bearing capacity, specific quantity of metal and cost. As a result of the studies performed, a distinction has been made between the areas of rational use of beams of various types, the dependencies of the weight characteristics on the span and the load on the beams are made, the enlarged prices for fabrication and installation have been described. The obtained results allows to choose a rational constructive solution of rolling or welded beams with a known span and the value of the payload.