Центральноукраїнський науковий вісник. Технічні науки.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/9042
Ідентифікатор медіа: R30-03350 (рішення Національної ради України від 25.04.2024 р. № 1418).
ISSN 2664-262X (p)
DOI: 10.32515/2664-262X
Browse
3 results
Search Results
Item Cинтез підвіски автотранспортних засобів(ЦНТУ, 2023) Гевко, І. Б.; Ляшук О. Л.; Рогатинський, Р. М.; Матвіїшин, А. Й.; Хорошун, Р. В.; Hevko, І.; Lyashuk О.; Rohatynskyi, R.; Matviishyn, А.; Khoroshun, R.З метою створення прогресивних конструкцій автомобільних амортизаторів, які б забезпечували підвищений комфорт і безпеку водіння за рахунок поглинання ударів і коливань, що виникають під час руху по дорозі, нами було проведено їх структурно-схемний синтез методом ієрархічних груп за допомогою морфологічного аналізу. Загальна кількість базових генерованих варіантів підвіски автотранспортного засобу становитиме 167 варіантів, а кількість базових варіантів в залежності від типу амортизаційного принципу коливатиметься у межах від 96 до 148 варіантів. Використовуючи даний метод синтезу нами було розроблено і досліджено конструкцій гідропневматичних амортизаторів з активним пневмобалоном та демпфуючими елементами, які у порівнянні з традиційними стійками володіли високою адаптивністю та вібраційною стійкістю. In order to create progressive structures of car shock absorbers that would provide increased driving comfort and safety due to the absorption of shocks and vibrations that occur while driving on the road, we carried out their structural-schematic synthesis by the method of hierarchical groups with the help of morphological analysis. For this, the method of hierarchical grouping using morphological analysis was used and six basic types of suspension with original types of shock absorbers (hydraulic, hydropneumatic, pneumatic, magnetofluid, hydrovacuum and pneumovacuum type) were obtained. At the same time, the following basic morphological design features and elements were highlighted: a) depreciation principle, which includes the following features: type of depreciation principle; type of cushioning substance; hydraulic fluid flow holes in the piston (their area and number); number of cameras; location of cameras; the number of electromagnetic coils; b) a type of elastic element consisting of two main features, namely a spring, the structural features of which include the following features: construction; geometric section; rigidity; directionality; number; Location; and a pneumatic cylinder, the structural features of which include the following: geometric parameters; manageability (adaptability); construction; filling; rigidity; c) damping element, which includes the following features: location; number; material; combination; structural parameters.Item Cинтез гвинтових конвеєрів-змішувачів з обертовим кожухом(ЦНТУ, 2023) Коваль, С. О.; Koval, S.Проведено структурно-схемний синтез гвинтових конвеєрів-змішувачів з обертовим кожухом і згенеровано конструктивні рішення гвинтових робочих органів змішувачів, у яких є можливість вибору необхідної величини зазору між лопатями для інтенсифікації процесу змішування матеріалів різних фракцій, а також конвеєрів-змішувачів з обертовим кожухом без примусового обертання кожуха з можливістю пригальмовування і з примусовим обертанням кожуха з можливістю зміни довжини траси змішування і переміщення матеріалів. Представлено розроблену залежність з допомогою якою проводиться кінцевий відбір синтезованих конструкцій, яка враховує вагу таких факторів, як загальна вартість, продуктивність, ефективність виконання процесу змішування та кількість функціональних характеристик. Carrying out a structural-schematic synthesis often allows you to obtain a significant range of quite effective constructive solutions of various technical means, which fully also applies to the generation of alternative solutions for screw mixers. Screw conveyors-mixers with a rotating casing (GKZOK) are atypical mechanical means for performing the operation of mixing materials, however, they can become quite widely used in various sectors of the economy by combining the operation of moving loose material with the operation of mixing it. For their creation and further research, it is necessary to develop separate rational structures that would meet the relevant parameters in terms of achieving quality indicators of the mixing process, high performance of the process, as well as acceptable cost of manufacturing, operation and maintenance of such structures. For this reason, it is advisable to use the method of structural-schematic synthesis by the method of hierarchical groups with the help of morphological analysis to obtain appropriate technical solutions.Item Синтез гвинтових конвеєрів з можливостями технологічного перетворення і мобільної зміни траєкторії перевантаження матеріалів(ЦНТУ, 2019) Гевко, Ів. Б.; Гудь, В. З.; Гевко, Ив. Б.; Hevko, I.; Hud, V.При проведенні морфологічного синтезу визначено відповідну кількість складових елементів конструкцій конвеєрів та зв’язків між ними, які визначають їх певні конструктивні ознаки. На основні виконаного аналізу складено морфологічну матрицю з морфологічними ознаками елементів генерованих конструкцій гвинтових конвеєрів. Згенеровано значну кількість працездатних конструкцій гвинтових конвеєрів з окремими типами функціональних операцій чи призначенням. Також розроблено класифікацію гвинтових конвеєрів з можливостями технологічного перетворення і мобільної зміни траєкторії перевантаження матеріалів. При проведении морфологического синтеза определено соответствующее количество составляющих элементов конструкций конвейеров и связей между ними, которые определяют их определенные конструктивные признаки. На основные выполненного анализа составлено морфологическую матрицу с морфологическими признаками элементов генерируемых конструкций винтовых конвейеров. Создано значительное количество трудоспособных конструкций винтовых конвейеров с отдельными типами функциональных операций или назначений. Также разработана классификация винтовых конвейеров с возможностями технологического преобразования и мобильного изменения траектории перегрузки материалов. The purpose of the article is to carry out the synthesis by the method of hierarchical grouping by means of morphological analysis of screw conveyors with the possibilities of technological transformation and mobile change of the trajectory of material overload. The appropriate number of constituent elements of the conveyor structures and the relationships between them that determine their particular design features are determined. The basic analysis is based on a morphological matrix with the morphological features of the elements of the generated constructions of the screw conveyors and the connections between them. A considerable number of functional screw conveyor structures with separate types of functional operations or purpose, which are multifunctional and efficient compared to traditional screw conveyors, have been developed and investigated. The classification of screw conveyors with the possibility of technological transformation and mobile change of the trajectory of material overload is also developed. Structural synthesis of screw conveyors with the possibilities of technological transformation and mobile change of the trajectory of material overload by structural hierarchical grouping was performed by means of morphological analysis and a certain number of their variants was generated according to 9 types. It is also determined that individual technological operations or functional features, which are inherent in screw conveyors with the possibility of technological transformation and mobile trajectory change, can be combined into one design, which will allow to obtain multifunctional designs of conveyors.