Центральноукраїнський науковий вісник. Технічні науки.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/9042
Ідентифікатор медіа: R30-03350 (рішення Національної ради України від 25.04.2024 р. № 1418).
ISSN 2664-262X (p)
DOI: 10.32515/2664-262X
Browse
3 results
Search Results
Item Стійкість до вилягання і забур’яненість стеблостою льону-довгунця з урахуванням густоти посівів перед збиранням(ЦНТУ, 2023) Лімонт, А. С.; Лімонт, З. А.; Limont, А.; Limont, Z.Стійкість стеблостою до вилягання і його забур’яненість розглянути як фактори механізованого виробництва льону-довгунця, що формують екологоспрямоване готування і збирання рошенцевої льонотрести. Мета роботи полягала в дослідженні впливу густоти стеблостою льону-довгунця перед збиранням на стійкість його до вилягання і забур’яненість, а також з’ясуванні густоти посівів в передзбиральний період, яка уможливлює застосування засобів механізації на бранні рослин льону- довгунця і очісуванні стебел, їх розстиланні, підніманні стрічки льонотрести, формуванні її упаковок, їх навантажуванні та транспортуванні. Між стійкістю стеблостою льону-довгунця до вилягання і густотою стеблостою з урахуванням різних експериментальних даних виявлений від’ємний кореляційний зв’язок з коефіцієнтами кореляції мінус 0,460 і мінус 0,597 за кореляційних відношень стійкості стеблостою до вилягання на густоту стеблостою відповідно 0,703 і 0,652. Від’ємний кореляційний зв’язок виявлений і між забур’яненістю стеблостою, кількістю, а також щільністю бур’янів в ньому і густотою стеблостою з визначенням відповідних парних оцінних показників цього кореляційного зв’язку. Знайдені рівняння спадних гіпербол кількісної зміни результативних ознак залежно від факторіальної. Resistance of stalks to lodging and its weediness should be considered as factors of mechanized production of long flax, which form environmentally friendly preparation and harvesting of Roshen flaxseed. The aim of the study was to study the effect of stem density of long flax before harvesting on its resistance to lodging and weeding, as well as to determine the density of crops in the pre-harvest period, which allows the use of mechanization in harvesting long flax plants and combing stems, their spreading, lifting the flaxseed tape, forming its packaging, loading and transportation. Some of the results of experimental research of a number of scientists on the study of agricultural techniques and measures for the cultivation of flax and the materials of their own research and their generalization were used as initial data. The method of processing the initial data is based on correlationregression analysis, based on the size of statistical samples used to determine the estimated indicators of qualitative and quantitative relationship of the studied results and factorial features of the processed correlation series and correlation tables. The range of variation of the studied features, the arithmetic mean and the standard deviation and coefficients of variation were determined. The search for the prognostic function was carried out by equalizing the experimental values of the performance traits depending on the factorial rectilinear and a number of curvilinear dependences with the calculation of the corresponding estimates of alignment, errors of regression equations and determination of the coefficient of determination. A negative correlation with the correlation coefficients of minus 0.460 and minus 0.597 was found between the resistance of the flax stalk to lodging and the density of the stalk, taking into account various experimental data, with correlations of the resistance of the stalk to lodging to the density of the stalk, respectively, 0.503 and 0.62, respectively. A negative correlation was also found between the weediness of the stem, the number and density of weeds in it and the density of the stem, with the determination of the corresponding paired estimates of this correlation. The equations of descending hyperbolas of quantitative change of effective signs depending on factorial are found.Item Обґрунтування обладнання для збирання льону олійного зернозбиральним комбайном(ЦНТУ, 2022) Дідух, В. Ф.; Буснюк, В. В.; Бодак, М. В.; Didukh, V.; Busyijk, V.; Bodak, M.В статті проводиться аналіз технологій збирання льону олійного з використанням зернозбирального комбайна. Тривалі дослідження у Луцькому НТУ вказують на можливість застосування брання стеблостою льону олійного. Запропонована конструкція широкозахватного брального апарату для даного способу з врахуванням сучасної методології створення сільськогосподарської техніки. Визначено необхідні робочі органи, які забезпечують формування потоку групи стебел і передачу їх на жатку зернозбирального комбайна. Встановлена умова нерозривності потоку групи стебел для забезпечення рівномірної подачі у молотильний апарат для якісного відділення насіння. Presentation of the results of experimental field research, laboratory to determine the conditions for harvesting oilseed flax stalks in the phase of full maturity. Outlining the conditions for the technological operation of harvesting oilseed flax by extracting stems from the soil. Presentation of the methodology for determining the necessary working elements of the equipment for extracting stems from the soil and forming the continuity of the flow of a group of stems on the harvesting part of the combine harvester. The problem that arises in the process of harvesting flax oil in the phase of full maturity is due to the presence of fiber in the stems, which complicates the work of the segmental-finger cutter. Therefore, the collection of such stems is carried out by the method of taking (extraction from the soil). This phenomenon requires the development of equipment for the universalization of the combine harvester, which increases its ability to be used in the harvesting of crops, taking into account the growing conditions and the state of the stalk. The experiments were conducted in the field on the Lyrina variety to establish the average value of the collection effort. The crops were not characterized by uniform ripening, which allowed to choose areas that characterized the maturity phases of oilseed flax. Start of research: mid-July, end - until 01.09. Accordingly, the study of the continuity of flow was conducted in the laboratory by simulating the selection of stems from one to five adjacent rows. It was found that a cylindrical support rough surface is required to ensure the continuity of the flow in the equipment. Based on the proposed structural and logical scheme, the main working units of the equipment to ensure high-quality harvesting of oilseed flax of any phase of ripeness without changing the design of the harvesting part of the combine harvester. These include: the mechanism of separation of portions of the stem from the total array and the picking device, which consists of pairs of rollers with horizontal axes of rotation and a distance between them of 76.2 mm. Combining the results of field and laboratory studies with the analysis of forces when moving the stem mass in the form of a flow of a group of stems on the supporting surface allowed to offer a constructive - layout scheme of equipment for harvesting oilseed flax. This equipment is intended to be installed on the harvesting part of the combine without changing its design. The analysis of forces performed for the flow of stems moving inseparably on a cylindrical support surface is important for the study of the selection of the stem mass of crops from rolls.Item Коренева система рослин і характеристики стебел льону-довгунця(ЦНТУ, 2022) Лімонт, А. С.; Лімонт, З. А.; Limont, A.; Limont, Z.В статті досліджені характеристики стебел льону-довгунця залежно від маси коріння однієї рослини та її частки в загальній масі рослин. В якості характеристик стебел прийняті висота рослин, маса насіння з однієї рослини, зігнутість стебел, кількість рослин з рівним стеблом (%), вміст деревини в 10-сантиметровому відрізку стебла на відстані від сім’ядольних листочків до 10 см, 10–20 і 20–30 см, а також вихід волокна з технічної частини стебла. На підставі кореляційно-регресійного аналізу експериментальних даних про масу коріння однієї рослини льону-довгунця, а також частку маси коріння в загальній масі рослин і досліджуваних характеристик стебел, які наведені в літературних джерелах, з’ясовано, що зміна висоти рослин, маси насіння з однієї рослини, кількості рослин з рівним стеблом (%) та вмісту деревини в 10-сантиметровому відрізку стебла на відстані до 10 см від сім’ядольних листочків залежно від частки маси коріння в загальній масі рослин описується рівняннями прямолінійної регресії з додатними кутовими коефіцієнтами. Залежно від цієї ж факторіальної ознаки зміна зігнутості стебел описується рівнянням спадної степеневої функції. The aim of the article was to study the characteristics of long flax stalks depending on the mass of roots of one plant and its share in the total mass of plants. The characteristics of the stems are the height of plants, seed weight per plant, curvature of stems, number of plants with flat stems (%), wood content in a 10-centimeter segment of the stem at a distance of cotyledons up to 10 cm, 10-20 and 20 -30 cm, as well as the output of the fiber from the technical part of the stem. The range of variation of the mass of absolutely dry roots of one plant ranged from 89 to 192 mg for arithmetic mean and standard deviation of 138 and 29.3 mg, respectively, and the coefficient of variation of the empirical distribution of root mass of one plant of the analyzed long flax varieties 21.2%. The share of root mass in the total mass of plants ranged from 19.5 to 32.9%. The main statistical indicators of empirical distributions of the found out characteristics of stalks of flax plants have been determined. Based on correlation-regression analysis of experimental data on the mass of roots of one long flax plant and the studied characteristics of stems, which are given in the literature, it was found that the change in plant height, seed weight per plant, number of plants with flat stems (%) , wood content in a 10-cm segment of the stem at a distance of 10 cm from the cotyledons depending on the proportion of root mass in the total mass of plants, stem curvature depending on the weight of seeds from one plant and stem curvature, wood content in a 10-cm stem segment at a distance of 10–20 and 20–30 cm from the cotyledons, the fiber output from the technical part of the stem, depending on the height of the plants, is described by rectilinear regression equations with positive angular coefficients. Change in the number of plants with flat stems (%) depending on the weight of seeds per plant and plant height, as well as the number of plants with flat stems (%) and wood content in a 10-cm section of stem at a distance of 10 cm from cotyledons depending on from the height of plants is described by the equations of rectilinear regression with negative angular coefficients. The change in the curvature of stems depending on the mass of the roots of one plant and the share of this mass in the total mass of plants is described by the equations of decreasing power functions. The change in the number of plants with a flat stem (%) depending on the root mass of one plant is described by the equation of slow-growing hyperbola. The closest correlation between studies was found between stem curvature and root mass of one plant (negative correlation) with a correlation coefficient of minus 0.706, between stem curvature and the share of root mass in total plant mass (negative correlation) with a correlation coefficient of minus 0.713, between the number of plants with a flat stem (%) and the share of root mass in the total mass of plants and the mass of roots of one plant (in both cases a positive correlation) with correlation coefficients of 0.759 and 0.779, respectively. In the studied relationships, the correlation ratios slightly exceeded the values of the correlation coefficients. A less close positive correlation was found between the wood content in a 10 cm section of the stem at a distance of 10 cm from the cotyledons and the share of root mass in the total mass of plants (correlation coefficient 0.444) and between fiber yield from the technical part of the stem and plant height (correlation coefficient 0.327). A negative correlation with a correlation coefficient of minus 0.336 was found between seed weight per plant and plant height. In these studied relationships, the correlation coefficients slightly exceeded the values of the correlation relations of the performance factors by factorial ones. A positive correlation with a correlation coefficient of 0.114 with a correlation ratio of 0.141 was found between the mass of seeds from one plant and the share of root mass in the total mass of plants. In the rest of the correlations studied, the correlation coefficients ranged from 0.013 to 0.102 and were even smaller. The results of the research can be used in designing the technological process of growing flax, choosing tools for basic tillage and elaboration of technological and operational regulations for the use of mechanization in the preparation and harvesting of Roshen flaxseed.