Browsing by Author "Leschenko, S."
Now showing 1 - 16 of 16
Results Per Page
Sort Options
Item Characterization of peripherally based cells of the pneumatic-mechanical seeding machine of accurate sowing for tilled crops(КНТУ, 2014) Vasylkovs’ka, K.; Vasylkovs’kyy, O.; Leschenko, S.; Petrenko, D.; Васильковська, К. В.; Васильковський, О. М.; Лещенко, С. М.; Петренко, Д. І.In order to provide sowing of sugar beetroot seeds there was experimentally conformed theoretical research and characterization of peripherally based cells of the pneumatic mechanical seeding machine of accurate sowing. Якість дозування насіння до борозни залежить, в першу чергу, від рівномірності розташування насінин на висівному диску. На кафедрі сільськогосподарського машинобудування Кіровоградського національного університету запропоновано нову конструкцію висівного апарата, який забезпечує більш якісне дозування насіння. Головною особливістю нового висівного апарата є використання висівного диска з периферійним розташуванням комірок, за якими на його внутрішній поверхні розмішені лопатки для примусового захоплення насіння диском в робочій камері та подальшого його транспортування до зони скидання. З метою визначення раціональних параметрів комірок висівного диска виготовлена експериментальна установка і проведені дослідження по визначенню потрібного значення коефіцієнта заповнення комірок насінням різних розмірів. Досліди проводили, використовуючи диски з радіусами твірних комірок 5,0 мм та 6,0 мм, які відповідають їх площам 9,6 мм2 та 16,3 мм2 відповідно. Розрідження у вакуумній камері становило 0,2 кПа, а колова швидкість комірок – 2 м/с. На підставі проведених дослідів можна стверджувати, що для забезпечення висіву насіння цукрового буряку, радіуси заокруглення твірних комірок повинні знаходитись в межах 5…6 мм, що в цілому узгоджується з результатами теоретичних досліджень, згідно з якими визначений радіус твірної становить 5,7 мм.Item Experimental Estimate of the Efficiency of Basic Tilling by Chisel Equipment in the Conditions of Soil Compaction(КНТУ, 2014) Leschenko, S.; Salo, V.; Petrenko, D.; Лещенко, C. М.; Сало, В. М.; Петренко, Д. І.The work discloses experimental estimates of the efficiency of basic boardless tilling by chisel equipment in the conditions of considerable compaction of the plough layer. The factors that prove expediency of soil chiselling and the outcomes of introduction into technological growing processes of this resource saving tilling were presented. The design of chisel blade with vertical and horizontal deformators was suggested. The results of experimental research of the designed chisel showed influence of speed parameters and a set of additional working organs on the indicators of soil grinding were given. Робота присвячена експериментальній оцінці ефективності основного безвідвального обробітку ґрунту чизельними знаряддями в умовах значного переущільнення орного горизонту. Наведені фактори, що доводять доцільність проведення чизелювання ґрунтів та наслідки впровадження в технологічні процеси вирощування цього ресурсозберігаючого способу основного обробітку. Запропоновано конструкцію чизельної лапи з вертикальними та горизонтальними деформаторами. Приведені результати експериментальних досліджень розробленого чизеля в ході яких встановлено вплив швидкісних параметрів та набору додаткових робочих органів на якісні показники подрібнення ґрунту.Item Адаптація операцій чизельного обробітку до складних ґрунтово-кліматичних умов Центральної України(Копіцентр «Документ-сервіс», 2015) Лещенко, С. М.; Сало, В. М.; Васильковський, О. М.; Петренко, Д. І.; Дейкун, В. А.; Leschenko, S.; Salo, V.; Vasilkovskiy, O.; Petrenko, D.; Deikun, V.Традиційна система основного обробітку ґрунту, яка базується на застосуванні ґрунтообробних знарядь полицевого типу, останнім часом втрачає свої позиції і поступається безполицевим способам обробітку. В роботі окреслені проблеми реалізації технологій безвідвального обробітку ґрунту в рослинництві. Встановлено ряд причин, як не дозволяють в повній мірі впровадити ресурсозберігаючі методи під час операцій основного обробітку ґрунту в Україні. На основі критичного аналізу розроблено конструкцію вдосконаленого комбінованого чизеля із основними робочими органами, які поєднують роботу горизонтальних та вертикальних деформаторів. На основі методики планування експерименту проведено експериментальну перевірку якості роботи комбінованого чизеля. Встановлено раціональні параметри та режими роботи машини для ґрунтово-кліматичних умов України. На основі проведеного експерименту надані рекомендації щодо виробництва чизельних ґрунторозпушувачів. Traditional primary tillage being based on the use of tillage implements of mouldboard type, is currently losing its position and forgoes mouldboardless methods of cultivation. This paper outlines the implementation problems of mold technologies in crop cultivation. A number of reasons has been defined that don’t allow to fully implement saving techniques during basic soil tillage operations in Ukraine. Based on the critical analysis developed the advanced design combined with chizel basic working tools that combine work horizontal and vertical deformators has been worked out. Based on the experimental design technique has been experimentally tested the quality of the combined chizel. Rational parameters and modes of the machine for soil and climatic conditions of Ukraine have been established. Based on the experiment having been conducted the recommendations on chisel rippers production have been given.Item Аналітична оцінка якості пневмосепарації на основі алгоритму функціонування зерноочисних машин(КНТУ, 2012) Лещенко, С. М.; Сало, В. М.; Васильковський, О. М.; Богатирьов, Д. В.; Отт, В. В.; Leschenko, S.; Salo, V.; Vasil'kovskiy, А.; Bogatirev, D.; Ott, V.В статті проведено аналітичну оцінку якості пневмосепараційного процесу на основі алгоритму функціонування зерноочисних машин загального призначення. Запропоновано системний аналіз вхідних та вихідних чинників системи, що впливають на кількісні і якісні показники сепарації, які отримані з використанням методики В.Е. Саітова. Після побудови алгоритму функціонування зерноочисної машини проведено оцінку якості роботи та витрат енергії. Використовуючи теорію ймовірностей отримані залежності по оцінці ефекту очистки виходячи з рівня виділення компонентів кожної фракцій по етапах очищення. Наведені дослідження доводять, що використання замкненого повітряного потоку комбінованої дії (послідовне продування похилим та вертикальним потоком) від одного джерела дозволяє підвищити якість сепарації без суттєвого підвищення енерговитрат. In the article the analytical estimation quality of air cleaner process is conducted on the basis of algorithm functioning of grain cleaners of the general setting. The analysis systems of entrance and initial factors is offered systems. Influencing on quantitative and quality indexes separations that is got with the use of methodology V. Saitov. After the construction algorithm functioning of grain cleaner the estimation of quality work and charges of energy is conducted. Using the theory of chances the got dependences as evaluated by the effect of cleaning coming from the level of selection of components each factions on the stages cleaning. The brought researches over prove that the use of the reserved current air of the combined action(successive blowing out by a sloping and vertical stream) from one source allows to improve quality separation without the substantial increase of expenses energy.Item Аналітичне дослідження якості розділення зерносуміші відцентрово-пневматичним сепаратором(КНТУ, 2011) Васильковський, О. М.; Гончаров, В. В.; Петренко, Д. І.; Лещенко, С. М.; Vasil'kovskiy, A.; Goncharov, V.; Petrenko, D.; Leschenko, S.Означені проблемні питання підготовки зернового матеріалу до зберігання. Наведені результати математичного моделювання процесу переміщення частки по зовнішній прутковій поверхні обертального барабана в пневматичному каналі. Використовуючи графоаналітичний метод дослідження визначена теоретична якість розділення зерносуміші на компоненти відцентрово-пневматичним сепаратором. The problem questions preparation of grain-growing material are marked to storage. The brought results over of mathematical design process of moving part on the external surface small twig of rotatory drum in a pneumatic channel. Using the graphoanalytical method of research theoretical quality division of grain mixture is certain on components by a centrifugal-pneumatic separator.Item Аналітичні дослідження контактного руху легких домішок у пневмосепаруючому каналі(ЦНТУ, 2017) Нестеренко, О. В.; Петренко, Д. І.; Павленко, І. І.; Лещенко, С. М.; Гончарова, С. Я.; Nesterenko, О.; Petrenko, D.; Pavlenko, I.; Leschenko, S.; Honcharova, S.Враховуючи складність та випадковість пневмосепараційного процесу, на який впливає значна кількість факторів, є необхідним вирішення наукового завдання щодо встановлення закономірностей контактної взаємодії легких домішок з зерном в зоні пневмосепарації. В статті розглянуто контактний рух легких домішок через багатошаровий зерновий потік в вертикальному пневмосепаруючому каналі (ПСК) при їх багаторівневому одношаровому введенні. Отримані теоретичні залежності, які дозволяють встановити закономірності впливу основних конструктивно-технологічних параметрів ПСК на якість процесу сепарації. The separation of grain materials in the air separation channel occurs in rather difficult conditions, since light impurities, which are located in the lower cereal layers for the separation into the sediment chamber, require, with a minimum change in trajectory, to cross all above-placed seed moving in a downward direction. As a result of this movement there is a contact between light impurities and grain, which significantly affects the quality of cleaning. Therefore, a very important task is the analytical research aimed at investigating the contact interaction of light impurities with grain in the air separation channel and its effect on the quality of separation. Taking into account the multilevel feeding of the material in the PSC it is necessary to determine its influence on the qualitative parameters of the separation process and the establishment of the basic laws of the interaction of light impurities with grain material in the working area of the PSC. As a result of the theoretical analysis, the regularity of the contact motion of light impurities is established at the multilevel feeding of grain material in the PSC, which allows to obtain the averaged trajectories of impurities after interaction with grain layers during aerodynamic separation. It is determined that the allocation of light impurities depends on their time and velocity through the grain layers, which vary depending on the angle of contact of impurities with grain, as well as from the place of installation of the upper point of the output of grain hɠ.ɜ.. With six-level introduction of the material with the placement of grain particles in the direction of movement in the PSC with an interval equal to their size (2R) the place of installation of the upper point of the output of grain hɠ.ɜ. must be at a height hɠ.ɜ.= 0,05 ... 0,055 m relative to the level I of the input. The purpose of further researches should be to determine the qualitative characteristics of pneumatic separation in the contact interaction of grain material with air flow at its multilevel introduction into the PSC.Item Вплив конструктивно-технологічних параметрів комбінованого глибокорозпушувача на обробіток ґрунту(КНТУ, 2016) Лещенко, С. М.; Сало, В. М.; Петренко, Д. І.; Leschenko, S.; Salo, V.; Petrenko, D.В роботі обґрунтовується необхідність проведення глибокого розпушування ґрунту чизельними знаряддями для покращення агрегатного стану, інфільтраційних властивостей, руйнування ущільненої підорної підошви та реалізації основ ґрутозахисних та енергоощадних технологій. На основі оцінки конструкцій основних робочих органів чизельних знарядь зроблено висновок про доцільність використання розпушувальних лап із прямим стояком за умов введення в їх конструкцію додаткових рушіїв. В результаті проведених досліджень підтверджено вплив додаткових робочих органів та елементів на якість кришення ґрунту і витрати енергії. Запропоновано вдосконалену конструкцію чизельної лапи із додатковими рушіями. Представлені окремі результати теоретичних та експериментальних досліджень вдосконаленого комбінованого чизеля, які підтверджують його ефективність та можливість використання в складних ґрунтово-кліматичних умовах України. Встановлено, що при проведенні обробітку важкого і середнього суглинку вдосконаленим комбінованим чизелем можна досягти якісного показника кришення ґрунту на рівні 70-75%. Розроблені рекомендації по практичному використанню запропонованого чизельного глибокорозпушувача. The article gives suggestion on the improvement of deep tillage of soil with the help of combined chisel equipment. Taking into account the existing technologies of tillage and technical equipment for the realization of the above-mentioned operations we concluded that it is reasonable to give up traditional moldboard tillage. Taking into consideration the experience in the agrarian sphere of the developed countries and researchers’ findings the deep tillage by the combined chisel equipment can be the starting point of energy saving and soil protecting technologies. Considering the specificity of soils and variety of requirements for technical support of chisel tillage, the issue of improvement of chisel tilling equipment needs effective scientific solving, including the process of adaptation of the existing designs to certain conditions. On the basis of the research findings we proved a positive influence of the additional working parts and elements on the quality of soil pulverization and energy costs. The improved design of a chisel sweep with additional deformers was suggested. In the function of the additional working parts of the combined chisel it is recommended to use a coupled crosskill roller with straight teeth which functions as supportive and provides breaking big lumps and equal distribution of useful residues at the set depth. The presented results of theoretical and experimental research of the improved combined chisel prove its efficiency and enable its application in difficult soil and climatic conditions of Ukraine. It was specified that cultivation of hard and medium clay loam by a combined chisel increases the quality indicator of soil pulverization at the level of 70-75%. The recommendations for practical application of the suggested tilling appliance were developed.Item Деякі аспекти виробництва круп(КНТУ, 2010) Глобенко, Г. О.; Лещенко, С. М.; Петренко, Д. І.; Коцур, Т. А.; Globenko, G.; Leschenko, S.; Petrenko, D.; Kocur, T.В цій статті наведені відомості виробництва круп, опис принципово нової конструкції шелушильно-шліфувальної машини для полірування пшона та шелушіння зернових культур в зернопереробній промисловості. Вказана її відмінність від аналогів, технологічна та економічна доцільність впровадження у виробництво. Information production of groats is resulted in this article, description of on principle new construction huller-whitener for polishing of millet and decorticating of grain-crops in grain of processing industry. Its difference is indicated from analogues, technological and economic expedience of applying in industry.Item Дослідження якості роботи інерційної пневматичної зерноочисної машини(Копіцентр «Документ-сервіс», 2015) Петренко, Д. І.; Васильковський, О. М.; Лещенко, С. М.; Нестеренко, О. В.; Petrenko, D.; Vasilkovskiy, O.; Leschenko, S.; Nesterenko, A.Визначено, що для інтенсифікації пневмосепаруючих пристроїв виникає необхідність створення умови для більш ефективної взаємодії повітря з зерновим матеріалом. Цієї мети можна досягти як за рахунок раціонального способу введення матеріалу до пневмосепаруючих каналів, так і за рахунок вирівнювання повітряного потоку по перерізу каналу. Застосування ж багатофункціональних робочих органів, які здатні виконувати кілька операцій одночасно дає змогу значно знизити габаритні параметри сепаратора, його масу та енергоємність технологічного процесу. Виходячи з наведеного вище, запропоновано нову схему інерційної пневматичної зерноочисної машини (ІПЗМ) з однократним очищенням зернової маси повітряним потоком. За результатами проведених досліджень обґрунтовано конструктивне рішення, параметри та режими роботи запропонованого інерційного повітряно-решітного сепаратора. It was determined that for the intensification of pneumо-separation devices to create conditions for more effective interaction of air from the grain material, which can be achieved both by rational method of input material in pneumо-separation channel, and by smoothing the flow of air through the channel cross section. The use of multi-working, able to perform multiple operations simultaneously will significantly reduce the dimensions of the separator, mass and energy of the process. Based on the above the new scheme inertial pneumatic grain cleaning machines with single grain cleaning air stream has been proposed. According to the results of the research it was substantiated the design parameters and operating modes of the proposed airsieve inertial separator.Item Експоненційна та мультиплікативна регресійні моделі процесу пневмосепарації зернових сумішей(КНТУ, 2012) Лещенко, С. М.; Сало, В. М.; Васильковський, О. М.; Петренко, Д. І.; Кузло, В. В.; Leschenko, S.; Salo, V.; Vasil'kovskiy, A.; Petrenko, D.; Kuzlo, V.Робота присвячена підвищенню ефективності роботи зерноочисних машин загального призначення шляхом розробки універсальної регресійної моделі процесу очищення зерна повітряним потоком. Отримання адекватної моделі із зменшеною кількістю наближень і припущень дозволить більш ефективно вдосконалити процес очистки. В статті проведено побудову експоненційної та мультиплікативної регресійних моделей процесу сепарації. Запропоновано системний узагальнений аналіз факторів, що впливають на кількісні і якісні показники сепарації. Після використання π – теореми Букінгама, виведені регресійні моделі очищення зернових сумішей повітряним потоком, які є дійсними як для вертикальних, так і для похилих пневмосепаруючих систем. Аналіз безрозмірних комплексів в критеріальному рівнянні для вхідних перемінних дозволяє зменшити їх кількість, при цьому значно скоротити кількість дослідів та зменшити похибку. Work is sanctified to the increase of efficiency work grain cleaners of general-purpose by development of universal regressive model process cleaning of grain by the current of air. The receipt of adequate model with the diminished amount of approaching and suppositions will allow more effectively to perfect a cleaning process. In the article a construction is conducted by exponential and multiplicative regressive models of process separation. The generalized analysis systems of factors that influence on the quantitative and quality indexes separation offers. After the use π - theorems of Bookingamm, the regressive models cleaning of grain mixtures are shown out by the current of air, that are actual as for vertical so for the sloping air systems. The analysis of dimensionless complexes in criterion equalization for entrance variables allows to decrease their amount, here considerably to shorten the amount of experiments and decrease an error.Item Навісний подрібнювач стебел(2010-03-10) Лушніков, В. М.; Златопольський, Ф. Й.; Матвєєв, К. Д.; Сало, В. М.; Сисоліна, І. П.; Лещенко, С. М.; Lushnikov, V.; Zlatopolskyi, F.; Matvieiev, K.; Salo, V.; Sysolina, I.; Leschenko, S.Навісний подрібнювач стебел, який складається із рами, опорних коліс, валів з жорстко закріпленими на них дисковими ножами та роторами, механізму приводу валів, які розташовані по напрямній руху машини та закріплені на рамі, при цьому дискові ножі жорстко закріплені на передніх кінцях валів, а ротори жорстко закріплені на валах між опорами, який відрізняється тим, що вали роторів розташовані горизонтально на відстанях, які визначаються за допомогою діаметра дискових ножів, дискові ножі мають вигляд диска з жорстко з'єднаними з ним ріжучими елементами, які складають з діаметром диска кут a=100...150°, ротори мають вигляд жорсткого диска з шарнірно закріпленими пластинами (молотками), на парних та непарних (сусідніх) валах ротори розташовані в різних площинах обертання.Item Обґрунтування алгоритму функціонування інерційно-прямоточних зерноочисних машин(КНТУ, 2011) Лещенко, С. М.; Васильковський, О. М.; Васильковський, М. І.; Петренко, Д. І.; Караман, Д. В.; Leschenko, S.; Vasil'kovskiy, A.; Vasil'kovskiy, M.; Petrenko, D.; Karaman, D.В статті проведено обґрунтування алгоритму функціонування прямоточних повітряно- інерційних зерноочисних машин. Запропоновано системний аналіз вхідних та вихідних чинників системи, що впливають на кількісні і якісні показники сепарації, які отримані з використанням методики В.Е. Саітова. Після побудови алгоритму функціонування зерноочисної машини проведено оцінку якості роботи та витрат енергії і розроблено нову схему інерційно-прямоточних сепараторів. The ground algorithm of functioning airily-inertia grain cleaners is conducted in the article. The analysis the systems of entrance and initial factors is offered systems, influencing on the quantitative and highquality indexes of cleaners, which are got with the use methodology of V. Saitov. Intercommunication is certain between expenses of energy, amount remote admixtures and quality of the cleared grain. After the construction algorithm functioning of grain cleaner the estimation quality of work and charges energy is conducted, and also the new chart of pnevmoinercionnyh separators is worked out. The technological process of work is analysed and basic advantages of the offered machines are described. It is set that in combination with the rational sequence of technological operations a considerable effect has the use of multifunction working organs - blade rotor and twig sieve.Item Обґрунтування параметрів аспірації відцентрового пневморешітного сепаратора зерна(КНТУ, 2012) Васильковський, О. М.; Лещенко, С. М.; Петренко, Д. І.; Мороз, С. М.; Кожанова, А. С.; Vasilkovskiy, O.; Leschenko, S.; Petrenko, D.; Moros, S.; Kozhanova, A.Стаття присвячена вирішенню питання підвищення ефективності розділення зернових сумішей повітряним потоком. Авторами наведені результати експериментального дослідження аспірації відцентрового пневморешітного сепаратора зерна. Article is devoted to the solution a question of increase efficiency of division a grain mixes by an air stream. Authors gave results of a pilot study of an air system of a centrifugal separator of grain.Item Оцінка ефективності внесення туків підґрунтовим способом під ярий ячмінь(КНТУ, 2014) Дейкун, В. А.; Сало, В. М.; Васильковський, О. М.; Лещенко, Л. М.; Шепілова, Т. П.; Deykun, V.; Salo, V.; Vasilkovskiy, А.; Leschenko, S.; Shepilova, T.В статті наведені результати визначення ефективності підґрунтового внесення гранульованих мінеральних добрив у польових умовах. Здійснено порівняння запропонованого способу удобрення з класичним розкидним та встановлено раціональну норму внесення туків. The paper presents the results of determining the effectiveness of subsoil introduction granular mineral fertilizers in the field. To improve the efficiency of mineral fertilizers plants at the Department of Agricultural Engineering Kirovohrad National Technical University substantiated parameters and original design created fertilizer spreader device that allows high-quality disperse granular fertilizers in by paw space. Field tests of the proposed device fertilizer spreader conducted in Kirovohrad region. During the execution of sowing angle to the horizontal working body was 1, since this was made tillage to a depth of 8 cm (light disc harrows, combined with toothed). Working bodies were equipped spreader of parameters that provide the bulk supply of seed to a distance of 10 cm from the axis of the leg. After germination index uniformity determined by the classical method. Analysis of studies have shown that entering mineral fertilizers using tiller, equipped working with substantiated authority in the parameters is more effective than the traditional method of surface scattering and reduces the norms of their use by 40% compared with the recommended method when making scattering. In the article the results of determination of efficiency subsoil bringing of granular mineral fertilizers are presented in the field terms. Comparing of an offer subsoil method bringing different norms of complex fertilizers is executed to classic on an area 1,7 ha. During experiments efficiency of subsoil method bringing granular mineral fertilizers is set on the productivity of fervent barley. In addition, the got results of experiments testify to possibility of substantial decline norm bringing granular mineral fertilizers without the loss of the productivity.Item Попередні дослідження альтернативних джерел створення повітряного потоку в пневмоінерційних зерноочисних машинах(КНТУ, 2009) Васильковський, М. І.; Васильковський, О. М.; Лещенко, С. М.; Петренко, Д. І.; Vasilkovskiy, M.; Vasilkovskiy, A.; Leschenko, S.; Petrenko, D.В статті проведено огляд та аналіз джерел повітряного потоку, які працюють в схемах ЗОМ загального призначення, відмічені їх основні переваги та недоліки, окреслені напрямками подальшого вдосконалення. Запропоновано використання лопатевого ротора, як багатофункціонального робочого органу, який, крім функції створення повітряного потоку, пересуває зерно по підсівному решеті та вивантажує його із машини. Визначені основні конструктивні особливості запропонованого робочого органу та приведені елементи розрахунку деяких параметрів ротора. Представлені результати попередніх досліджень запропонованого робочого органу при створенні ним повітряного потоку. A review and analysis of sources of current of air, which work in the charts of grain cleaners the general setting, is conducted in the article, marked their basic advantages and failings with the outlined directions of subsequent perfection. The use of blade rotor is offered, as a multifunction working organ which except for the function of creation of current of air moves grain after a sieve and the last unloads from a machine. The basic structural features of the offered working organ are certain and the elements of calculation of some parameters of rotor are resulted. The results of previous researches of the offered working organ are presented at creation by him current of air.Item Результати експериментальних досліджень роботи висіваючих апаратів посівних машин для систем точного землеробства(КНТУ, 2011) Свірень, М. О.; Лещенко, С. М.; Бойко, А. І.; Банний, О. О.; Sviren, N.; Leschenko, S.; Boyko, А.; Banniy, А.В статті приведені результати експериментальних досліджень роботи висіваючих апаратів посівних машин для систем точного землеробства. Проаналізовано якість присмоктування насіння до висіваючого диску залежно від форми комірки та степені розрідження у вакуумній камері висіваючого апарату. Запропоновано нову тороїдальну подовжену форму присмоктуючої комірки, та приведені результати її роботи на насінні різних культур. Наведені результати дослідження впливу зміни діаметру комірки під час її забивання пилом на якість присмоктування. Дані результати порівняльних випробувань серійної посівної секції та посівної секції із запропонованою формою комірок. In the article brought results over of experimental researches work seedmeters of sowing machines for the systems of exact agriculture. Quality of seed is analysed to the sowing disk depending on the form cell and degree of dilution in a vacuum chamber seedmeter. The new tors form extended form of air cell, and the brought her job performances over, is offered on the seed of different cultures. Results over research influence of diameter cell are brought during her hammering by a dust on quality of table of contents. These results of comparative tests serial sowing section and sowing section with the offered form of cells.