Центральноукраїнський науковий вісник. Технічні науки. Випуск 8. Частина 1. - 2023
Permanent URI for this collectionhttps://dspace.kntu.kr.ua/handle/123456789/15503
Browse
Search Results
Item Дослідження захисних елементів технологічного устаткування та обладнання на автотранспортних підприємствах(ЦНТУ, 2023) Гевко, Ів. Б.; Гудь, В. З.; Левкович, М. Г.; Сіправська, М. Д.; Hevko, І.; Hud, V.; Levkovich, М.; Sipravska, М.Забезпечення надійності та безпеки при використанні обладнання є важливою задачею при проектуванні та виготовленні даного устаткування. Захисні елементи якими обладнано технологічне устаткування для ремонту на автотранспортних підприємствах є важливою запорукою показників надійності використання та довговічності такого обладнання. Саме такими елементами в даній статті є захисні муфти, які широко використовуються в устаткуванні. В даній статті проведено огляд використання та описано принцип роботи та конструкцію захисних муфт з підвищеними показниками надійності та точності спрацювання. Protective equipment is used in any equipment of motor vehicle enterprises, both to protect the equipment itself to reduce damage and for the worker. The protective elements of the equipment must provide high indicators of reliability and accuracy, therefore the purpose of this article is to conduct a study of these protective elements to improve their efficiency and reliability of operation when used on the equipment of motor vehicle enterprises.Item Cинтез підвіски автотранспортних засобів(ЦНТУ, 2023) Гевко, І. Б.; Ляшук, О. Л.; Рогатинський, Р. М.; Матвіїшин, А. Й.; Хорошун, Р. В.; Hevko, І.; Lyashuk, О.; Rohatynskyi, R.; Matviishyn, А.; Khoroshun, R.З метою створення прогресивних конструкцій автомобільних амортизаторів, які б забезпечували підвищений комфорт і безпеку водіння за рахунок поглинання ударів і коливань, що виникають під час руху по дорозі, нами було проведено їх структурно-схемний синтез методом ієрархічних груп за допомогою морфологічного аналізу. Загальна кількість базових генерованих варіантів підвіски автотранспортного засобу становитиме 167 варіантів, а кількість базових варіантів в залежності від типу амортизаційного принципу коливатиметься у межах від 96 до 148 варіантів. Використовуючи даний метод синтезу нами було розроблено і досліджено конструкцій гідропневматичних амортизаторів з активним пневмобалоном та демпфуючими елементами, які у порівнянні з традиційними стійками володіли високою адаптивністю та вібраційною стійкістю. In order to create progressive structures of car shock absorbers that would provide increased driving comfort and safety due to the absorption of shocks and vibrations that occur while driving on the road, we carried out their structural-schematic synthesis by the method of hierarchical groups with the help of morphological analysis. For this, the method of hierarchical grouping using morphological analysis was used and six basic types of suspension with original types of shock absorbers (hydraulic, hydropneumatic, pneumatic, magnetofluid, hydrovacuum and pneumovacuum type) were obtained. At the same time, the following basic morphological design features and elements were highlighted: a) depreciation principle, which includes the following features: type of depreciation principle; type of cushioning substance; hydraulic fluid flow holes in the piston (their area and number); number of cameras; location of cameras; the number of electromagnetic coils; b) a type of elastic element consisting of two main features, namely a spring, the structural features of which include the following features: construction; geometric section; rigidity; directionality; number; Location; and a pneumatic cylinder, the structural features of which include the following: geometric parameters; manageability (adaptability); construction; filling; rigidity; c) damping element, which includes the following features: location; number; material; combination; structural parameters.