Центральноукраїнський науковий вісник. Технічні науки. Випуск 1. - 2019
Permanent URI for this collectionhttps://dspace.kntu.kr.ua/handle/123456789/9043
Browse
Search Results
Item type:Item, Вагові характеристики та області раціонального використання сталевих балок у будівлях та конструкціях вантажопідйомних машин(ЦНТУ, 2019) Пашинський, В. А.; Скриннік, І. О.; Харченко, І. В.; Хачатурян, С. Л.; Пашинский, В. А.; Скрынник, И. О.; Харченко, И. В.; Хачатурян, С. Л.; Pashinskyi, V.; Skrynnik, I.; Kharchenko, I.; Khachaturian, S.За результатами експериментального проектування сталевих балок чотирьох типів виявлені та описані залежності їх маси від прольоту й діючого навантаження. Встановлено, що при малих навантаженнях і великих прольотах власна вага балок може перевищувати 20% корисного навантаження. Розроблені укрупнені розцінки на виготовлення та монтаж сталевих балок і колон різних типів. З урахуванням несучої здатності, металоємності та вартості надані рекомендації щодо раціонального використання балок різних типів. По результатам экспериментального проектирования стальных балок четырех типов выявлены и описаны зависимости их массы от пролета и действующей нагрузки. Выявлено, что при малых нагрузках и больших пролетах собственный вес балок может превышать 20% полезной нагрузки. Разработаны укрупненные расценки на изготовление и монтаж стальных балок и колонн различных типов. С учетом несущей способности, металлоемкости и стоимости даны рекомендации относительно рационального использования балок различных типов. The purpose of this work is to obtain dependencies for the preliminary determination of specific quantity of metal and loads from their weight of steel beams of different types, as well as outline the area of rational use of beams of the investigated types, taking into account the criteria of specific quantity of metal and their cost. Experimental design of steel beams of four types is performed: rolled I-beams, perforated steel beams, from the developed assortment of welded H-beams and welded H-beams of individual design. Beam spans varied from 3 m to 36 m, and the design values of the loads were set equal to 5...150 kN/m. The indicated limits are selected taking into account the possible use of beams in load-lifting machines design, roof designs of production and civil buildings, as well as restrictions of assortments of I-beams. For beams of four types the areas of rational use according to criteria of durability and rigidity are defined. By analytical equations detected and described the dependence on the mass of projected beams to span and load. It is shown that for small loads and large spans, the own weight of beams can exceed 20% of the payload. The enlarged prices for manufacturing and installation of steel beams and columns of various types are developed. The presentation of weight characteristics and prices in the form of dependencies of the main constructive factors allows to estimate the specific quantity of metal and the cost of beams of different types before their designing. The recommendations are given for rational use of beams of different types, taking into account their load-bearing capacity, specific quantity of metal and cost. As a result of the studies performed, a distinction has been made between the areas of rational use of beams of various types, the dependencies of the weight characteristics on the span and the load on the beams are made, the enlarged prices for fabrication and installation have been described. The obtained results allows to choose a rational constructive solution of rolling or welded beams with a known span and the value of the payload.Item type:Item, Напружено-деформований стан поверхневого шару деталей при реалізації триботехнологій припрацювання і відновлення(ЦНТУ, 2019) Аулін, В. В.; Лисенко, С. В.; Гриньків, А. В.; Яцун, В. В.; Скриннік, І. О.; Гупка, А. Б.; Аулин, В. В.; Лысенко, С. В.; Гринькив, А. В.; Яцун, В. В.; Скринник, И. А.; Гупка, А. Б.; Aulin, V.; Lysenko, S.; Grinkiv, A.; Yatsun, V.; Skrynnik, I.; Gupka, A.З теоретичної точки зору розглянуто вплив триботехнологій припрацювання і відновлення на формування напружено-деформованого стану поверхневих шарів спряжених деталей систем і агрегатів транспортних засобів. Визначено, що переважна більшість їх трибоспряжень працюють в умовах пластичного насиченого або ненасиченого контактів. Модифікований поверхневий шар сформований реалізацією триботехнологій припрацювання і відновлення спряжених деталей розглядали як конструктивно-ортотропні оболонки. Враховуючи систему діючих сил і моментів сил показано, що вони задовольняють рівнянням рівноваги, що характерні для тонких однорідних оболонок Компоненти напруження і деформації поверхневого шару отримані відповідно до узагальненого закону Гука, з урахуванням гіпотези Кірхгофа-Ляве. Ці вирази можна використовувати для оцінки напружено-деформованого стану спряжених поверхонь деталей при їх модифікуванні або впливі в процесі реалізації триботехнологій припрацювання та відновлення для підвищення їх ресурсу. С теоретической точки зрения рассмотрено влияние триботехнологий приработки и восстановления на формирование напряженно-деформированного состояния поверхностных слоев сопряженных деталей систем и агрегатов транспортных средств. Определено, что подавляющее большинство их трибосопряжений работают в условиях пластического насыщенного или ненасыщенного контактов. Модифицированный поверхностный слой сформированный реализацией триботехнологий приработки и восстановления сопряженных деталей рассматривали как конструктивно-ортотропные оболочки. Учитывая систему действующих сил и моментов сил показано, что они удовлетворяют уравнениям равновесия, характерным для тонких однородных оболочек Компоненты напряжения и деформации поверхностного слоя полученные в соответствии с обобщенного закона Гука, с учетом гипотезы Кирхгофа-Ляве. Эти выражения можно использовать для оценки напряженно-деформированного состояния сопряженных поверхностей деталей при их модифицировании или воздействии в процессе реализации триботехнологий приработки и восстановления для повышения их ресурса. When solving the problem of increasing the wear resistance and reliability of machine systems and assemblies, an important factor is to take into account the stress-strain state of the working surface layer of parts. This state changes if the part is purposefully strengthened during coating or when the operating modes of the tribological conjugations of the parts are changed. In this work, the tribotechnologies of running-in and recovery are taken as modifying actions and the concept of a dynamic approach to changing stress and strain fields is developed. An attempt is made to simulate a stress-strain layer of a part during operation. From a theoretical point of view, the influence of tribological technologies of running-in and recovery on the formation of the stress-strain state of the surface layers of the conjugate parts of systems and assemblies of vehicles is considered. It was determined that the vast majority of their tribological conjugations work under conditions of plastic saturated or unsaturated contacts. The modified surface layer formed by the implementation of tribological technologies of running-in and recovery of mating parts was considered as structural-orthotropic shells. Given the system of acting forces and moments of forces, it is shown that they satisfy the equilibrium equations characteristic of thin homogeneous shells. The stress and strain components of the surface layer obtained in accordance with the generalized Hooke law, taking into account the Kirchhoff-Lave hypothesis. These expressions can be used to assess the stress-strain state of the mating surfaces of parts when they are modified or exposed during the implementation of tribological technologies of running-in and recovery to increase their resource. It should be noted that in the formulas the average values of the value characterizing the stress-strain state of the material of the part are used.