Другий (магістерський) рівень
Permanent URI for this collectionhttps://dspace.kntu.kr.ua/handle/123456789/11504
Browse
3 results
Search Results
Item Дослідження впливу структури феритного ковкого чавуну на його твердість(ЦНТУ, 2025-01-02) Косінов, Артур Леонідович; Kosinov, ArturМетою даного дослідження є вивчення впливу структури феритного ковкого чавуну на його твердість. Дослідження проводяться методами математичної статистики, кореляційним аналізом в середовищі Місrosoft Offis Excel та MathCADа. Проведені дослідження: вплив кількості виділень графіту на твердість ковкого чавуну; вплив діаметра графітних включень ковкого чавуну на твердість; вплив вмісту перліта на твердість ковкого чавуну; вплив розміру феритного зерна на твердість ковкого чавуну; вплив діаметра графітних включень на їх число; вплив кількості включень графіту на вміст перліту у феритному ковкому чавуні; вплив числа включень графіту на розмір зерна фериту; вплив вмісту перліту на середній діаметр графітних включень; вплив вмісту перліту на розмір феритного зерна ковкого чавуну; вплив розміру феритного зерна на діаметр виділень графіту феритного ковкого чавуну. Отримано рівняння множинної кореляції залежності твердості від структури феритного ковкого чавуну. З’ясовано, що при збільшенні розміру графітних включень до 80 мкм збільшується твердість ковкого чавуну, а якщо графітні включення будуть більше 80 мкм твердість починає знижуватися. При дослідженні твердість ковкого чавуну знижується зі збільшеням числа графітних включень та підвищується зі збільшенням вмісту перліта, а також знижується зі збільшенням розміру феритного зерна більше 40 мкм. Твердість ковкого чавуну знижується зі збільшенням числа графітних включень на 1 мм2. Твердість ковкого чавуну підвищується зі збільшенням вмісту перліту. Зі зростанням числа графітних включень вміст перліту знижується. При вмісті перліту до 10% зі зростанням кількості перліту розмір графітних включень збільшується. The aim of this study is to investigate the effect of the structure of ferritic ductile iron on its hardness. The research is carried out by the methods of of mathematical statistics, correlation analysis in the environment of Microsoft Offis Excel and MathCAD. The research was conducted to determine the effect of the amount of graphite on the hardness of of ductile iron; influence of the diameter of graphite inclusions of ductile iron on hardness; the effect of pearlite content on the hardness of ductile iron; the effect of ferrite grain size on ferrite grain size on the hardness of ductile iron; influence of the diameter of graphite inclusions on their number inclusions on their number; the effect of the number of graphite inclusions on the pearlite content in ferritic malleable cast iron; influence of the number of graphite inclusions on the grain size influence of pearlite content on the average diameter of graphite inclusions; influence of of pearlite content on the size of ferritic grain of ductile iron; influence of ferritic grain size on the diameter of ferrite grain size on the diameter of ferritic graphite inclusions in ductile iron. The equation of multiple correlation of the dependence of hardness on the structure of of ferritic ductile iron. It has been found that with an increase in the size of graphite inclusions up to 80 μm the hardness of ductile iron increases, and if graphite inclusions are more than 80 microns, the hardness begins to decrease. In the study, the hardness of the of ductile iron decreases with an increase in the number of graphite inclusions and increases with an increase in the pearlite content, and also decreases with increase in ferrite grain size over 40 microns. The hardness of ductile iron cast iron decreases with an increase in the number of graphite inclusions per 1 mm2. The hardness of ductile iron increases with the pearlite content. With the number of graphite inclusions increases, the pearlite content decreases. At the content of content of up to 10%, the size of graphite inclusions increases with the amount of pearlite increases.Item Дослідження впливу структури на відносне подовження ковкого чавуну(ЦНТУ, 2025-01-02) Миронов, Денис Сергійович; Myronov, DenysМета дослідження це вивчення впливу структури на відносне подовження ковкого чавуну. Дослідження проводились відповідно методами математичної статистики – перевірка кореляційним аналізом в середовищі Місrosoft Offis Excel та MathCAD. В роботі отримані дані з метою встановлення степені достовірності досліджуваних залежностей відносного подовження від показників та структури ковкого чавуну. Виконані дослідження впливу діаметра графітних включень на відносне подовження ковкого чавуну; кількості виділень графіту на відносне подовження ковкого чавуну; впливу розміру феритного зерна на відносне подовження ковкого чавуну; впливу міцність ковкого чавуну на його відносне подовження. Отримано рівняння множинної кореляції залежності відносного подовження від структури ковкого чавуну. З’ясовано, що при числі графітних включень менше 50 штук на 1 мм 2 шлифа зі збільшенням числа графітних включень збільшується і відносне подовження. З підвищенням вмісту перліту у ковкому чавуні відносне подовження зменшується. При зростанні розміру феритного зерна більше 45 мкм, відносне подовження феритного ковкого чавуну починає збільшуватися. Показано також, що зі збільшенням пластичності (%), міцність (В) феритного ковкого чавуну знижується. Встановлено, що між відносним подовженням ковкого чавуну і твердістю існує тісний лінійний зворотній кореляційний зв'язок, про що свідчить високе значення коефіцієнта кореляції (r = 0,3012). The purpose of the study is to study the effect of structure on the relative elongation of ductile iron. The research was conducted accordingly by the following methods mathematical statistics - checking by correlation analysis in Microsoft Offis Excel and MathCAD. The data obtained in this work were used to establish the degree of reliability of the of the studied dependences of relative elongation on the parameters and structure of ductile iron. The influence of the diameter of graphite inclusions on the relative elongation of ductile iron; the amount of graphite inclusions on the relative elongation of ductile iron; the effect of ferrite grain size on the relative elongation of ductile iron; influence of ductile iron strength on its relative elongation. The equation of multiple correlation of the dependence of of the relative elongation on the structure of ductile iron. It was found that when the number of graphite inclusions is less than 50 pieces per 1 mm 2 grind with an increase in the number of graphite inclusions, the relative elongation also increases. With an increase in the content of pearlite in ductile iron, the relative elongation decreases. When the ferrite grain size increases above 45 μm, the relative elongation of ferritic ductile iron begins to increase. It is also shown that with an increase in plasticity (%), strength (В) of ferritic ductile iron decreases. It was found that there is a close linear relationship between the relative elongation of ductile iron and hardness there is a close linear inverse correlation, as evidenced by the high value of the correlation coefficient is evidenced by the high value of the correlation coefficient (r = 0.3012).Item Дослідження впливу хімічного складу на механічні властивості виливків із сірого чавуну методами математичної статистики(ЦНТУ, 2024-01-18) Шевченко Богдан Петрович; Shevchenko BohdanМетою дослідження є вивчення впливу хімічного складу на механічні властивості виливків із сірого чавуну. Дослідження виконувалось методами математичної статистики – методом найменших квадратів і кореляційним аналізом в середовищі Місrosoft Offis Excel та MathCAD. Отримані рівняння регресій залежностей механічних властивостей сірого чавуну від хімічного складу. Встановлена тіснота зв’язку між досліджуваними параметрами, встановлено характер впливу вуглецю, кремнію, марганцю, сірки на механічні властивості сірого чавуну. Встановлений оптимальний склад чавуну. Показано, що суттєвий влив на механічні властивості має сумарний вміст вуглецю і кремнію. Це дозволяє регулювати хімічний склад для поліпшення міцності і твердості виливків із сірого чавуну. Запропоновано відповідно оптимальний хімічний склад сірого чавуну для дослідження механічних властивостей. The purpose of the study is to study the influence of the chemical composition on the mechanical properties of gray iron castings. The research was carried out using the methods of mathematical statistics - the method of least squares and correlation analysis in the environment of Microsoft Office Excel and MathCAD. Derivation of the regression equation of the dependences of the mechanical properties of gray cast iron on the chemical composition. The closeness of the connection between the investigated parameters was established, and the nature of the influence of carbon, silicon, manganese, and sulfur on the mechanical properties of gray cast iron was established. The optimal composition of cast iron is established. It is shown that the total content of carbon and silicon has a significant influence on the mechanical properties. This allows you to adjust the chemical composition to improve the strength and hardness of gray iron castings. The optimal chemical composition of gray cast iron for the study of mechanical properties is proposed.