Конструювання, виробництво та експлуатація сільськогосподарських машин. Випуск 47. Ч. 2. - 2017
Permanent URI for this collectionhttps://dspace.kntu.kr.ua/handle/123456789/7948
Browse
Search Results
Item Конструювання, виробництво та експлуатація сільськогосподарських машин. Вип. 47. Ч. 2.(ЦНТУ, 2017)В збірнику викладені питання розрахунку і конструювання, удосконалення конструкцій, створення і дослідження нових робочих органів сільськогосподарських машин, засобів механізації, електрифікації та автоматизації сільськогосподарського машинобудування. Описані результати досліджень технологій виробництва, надійності та довговічності машин. Дані практичні рекомендації по використанню результатів досліджень і дослідно-конструкторських розробок в сільсько- господарській і інших галузях машинобудування. Збірник розрахований на наукових і інженерно-технічних робітників науково-дослідних інститутів, ВНЗ, конструкторських організацій і промислових підприємств.Item Результати експериментальних досліджень МЕЗ-330 «Автотрактор» з плугом ПНН-5-40(ЦНТУ, 2017) Погорілий, С. П.; Pogorily, S.У роботі наведені результати досліджень роботи орного агрегату в складі МЕЗ-330 «Автотрактор» та плуга ПНН-5-40. Наведено методику проведення експериментальних досліджень, вимірювальне обладнання для реєстрації даних та фізико-механічні характеристики фону, на якому проводилися випробування. За результатами випробувань орного агрегату отримано взаємозв’язок між параметрами, зокрема, швидкістю руху, витратою палива та продуктивністю агрегату. Determine the main operational parameters of the arable aggregate based on the MEZ-330 "Autotractor" and the plunger PNN-5-40. The results of researches of work of the arable aggregate in the structure MEZ-330 "Autotractor" and the plunger PNN-5-40 are given in the work. The method of carrying out of experimental researches, measuring equipment for data registration and physical-mechanical characteristics of the background on which the tests were conducted are given. According to the results of tests of the arable aggregate, interconnection was obtained between the parameters, in particular, the speed of movement, fuel consumption and the productivity of the aggregate. According to the results of experimental studies of the arable aggregate MEZ-330 + PNN-5-40, it was established that under the conditions of ensuring the width of capture - 2.1 m, the depth of cultivation - 30 cm, working speed was 7,8 km/h (transfer number 2n ) and 10,8 km/h (transfer number 2v), the wheel hitch did not exceed 8%, the unit's productivity was 1,29 ha/h and 1,78 ha/h respectively, and the fuel consumption was 18,2 l/ha and 19,5 l/ha, which is at the level of arable aggregates formed on the basis of tractors.Item Вплив агрегатів на якість розпушування і рівномірність глибини обробітку ґрунту(ЦНТУ, 2017) Пустовіт, С. В.; Котков, В. І.; Poustovit, S.; Katkov, V.Вивчено якість роботи комбінованих агрегатів на передпосівному обробітку ґрунту. Викладено результати досліджень агрегатів для передпосівного обробітку ґрунту та посіву цукрових буряків. Приведені результати досліджень за якістю розпушування і рівномірністю глибини обробітку ґрунту. Досліджено якісні показники роботи із сівалками пневматичного типу СТВ-12, “Мультикорн”, так і сівалки типу ССТ-12В з механічним висівним апаратом.The quality of work of combined aggregates on pre-planting of soil is studied. The results of research of aggregates for pre-sowing tillage and sugar beet sowing are presented. The results of researches on quality of loosening and uniformity of depth of cultivation of a ground are resulted. Qualitative indices of work with pneumatic type seeders STV-12, "Multikorn", and seeders of type ССТ-12В with mechanical seeding machine are investigated. According to the results of agrotechnical evaluation of the experimental combined aggregate for preplanting of soil and seeding of sugar beet seeds in comparison with traditional aggregates, the following results were achieved: - Improvement of soil cultivation in the zone of earning seeds, as evidenced by an increase in field similarity of sugar beet seeds and the emergence of more friendly stairs; - reduction of the seed seed rate in connection with the increase of its field similarity; - Increasing the yield of sugar beet root crops by 10 ... 15%; - reduction of operating costs for pre-planting of soil and seeding of sugar beet.Item Технологія виготовлення зносостійких листів(ЦНТУ, 2017) Похмурська, Г. В.; Войтович, А. А.; Дзюбик, А. Р.; Pokhmurska, Н.; Voytovych, А.; Dzyubyk, А.У галузі сільського господарство використовують устаткування, конструктивні елементи якого зношуються під дією абразивів. Це виводить їх з ладу та спричиняє наступну заміну. Відомий спосіб продовження ресурсу устаткування шляхом наплавлення відновлювальних зносостійких шарів на зношені поверхні елементів з використанням порошкових дротів (ПД) системи Fe-Cr-B-C. Робота присвячена дослідженню впливу горизонтальної вібрації на мікроструктуру наплавленого металу із ПД 80Х20Р3Т. In agriculture, there is application of equipment with the structural elements that are worn under the influence of abrasives. This causes them to fail and to be replaced. A well-known method for extending the life of the equipment by surfacing the restorative wear-resistant layers on the worn surfaces of the elements using the Fe-Cr-B-C powder wire (PW) system. The work is devoted to the investigation of the influence of horizontal vibration on the microstructure of the deposited metal from the ПД 80Х20Р3Т. Therefore, in order to increase the wear resistance of agricultural machinery components, it is advisable to apply surfacing of the Fe-Cr-B-C system. A comparative analysis of technical and economic indicators shows that a slight improvement in the technology of obtaining such surfaces provides an increase in their durability by more than 4 times compared with the applied analogue.Item Аналіз відомих математичних моделей взаємодії з ґрунтом ріжучого периметрадовільної геометричної форми(ЦНТУ, 2017) Пугач, А. М.; Puhach, А.В статті проаналізовано ряд математичних моделей взаємодії з ґрунтовим середовищем робочого органа довільної геометричної форми. Важливість саме таких моделей полягає в тому, що вони дозволяють на проектному етапі розробки машини оцінити ефективність конструктивних рішень у порівнянні з аналогом і прототипом. Складність створення моделей полягає у великій кількості вихідних параметрів, які в своїй більшості взаємозалежать один від одного і носять імовірнісний характер. Адекватність моделі напряму залежить від прийнятих припущень і розрахункових схем, що взяті за основу. Стосовно ґрунтообробних знарядь існуючі математичні моделі дають велику похибку в розрахунках. Не в останню чергу це пов’язане з тим, що в їх основі закладені однакові підходи і припущення. В статті відстежується в історичному плані розвиток ідей, започаткованих Ю.А. Вєтровим і А.М. Панченко. The article analyzes a number of mathematical models of interaction with the soil environment of the working organ of an arbitrary geometric shape. The importance of such models is that they allow evaluating the efficiency of constructive solutions in the design stage of the machine development in comparison with the analog and prototype. The complexity of creating models is a large number of output parameters, which mostly depend on each other and are random. The adequacy of the model directly depends on the assumptions made and the design schemes that are taken as a basis. As for the soil-cultivating tools, mathematical models give a large error in the calculations. Not least, this is due to the fact that they are based on the same approaches and assumptions. The article traces in historical terms the development of ideas laid by Yu.A. Vetrov and A.N. Panchenko. An analysis of existing mathematical models showed that they have common elements: such as the distribution of operating forces, the refusal of the use of soil hardness in favor of specific particle adhesion, the final transition to the use of the concept cutting perimeter.Item Методика проектування безударних кулачків чотиритактних швидкохідних поршневих двигунів(ЦНТУ, 2017) Швець, І. А.; Shvets, І.В статті описано проблеми, що призводять до появи динамічних навантажень на складові елементи механізму газорозподілу. Запропоновано шляхи вирішення зазначеної проблеми за допомогою нової методики профілювання, що базується на розкладенні функції в ряд. Представлено аналітичні вирази для визначення вихідних параметрів руху штовхача. This article deals with the search for the law of motion of the pusher for the cam mechanism, which will ensure a shock-free closure of the constituting links of the mehanzim to ensure reliable operation of the gas distribution mechanism. The features of the existing cam mechanisms and techniques for their design were considered. The problems of typical cam mechanisms associated with exceeding the value of the boundary acceleration leading to the rupture of the power links of the mechanism are described. A new method for designing cam mechanisms based on the expansion of the function in a series based on the "Decoder" method is proposed. Mathematical dependencies describing the basic laws of the pusher motion (displacement, velocity and acceleration) are obtained with their subsequent implementation by computational methods on a personal computer. The proposed dependencies for the law of motion of the pusher showed a decrease in the level of the boundary acceleration of the pusher motion, with the maximum value of the valve cross section due to the conservation of the rectangular form of the acceleration law.Item Теплообмін і тертя турбулентного потоку газу в трубі при малих числах Рейнольдса(ЦНТУ, 2017) Святецький, М. В.; Ошовський, В. Я.; Капура, І. А.; Будуров, В. Л.; Svyatetsky, M.; Oshovsky, V.; Kapura, I.; Budurov, V.В статті проаналізовані відомі результати експериментальних і теоретичних досліджень розглядуваних процесів. Загальним недоліком згадуваних робіт є відсутність належної фізичної обгрунтованості прийнятих напівемпіричних теорій, що не дозволяє достатньо коректно врахувати специфіку процесів турбулентного переносу і істотно обмежує область застосування одержаних результатів. Показано, що врахування взаємодії молекулярного і молярного механізмів переносу, які кількісно порівнянні, дає можливість узгодити експериментальні результати з теоретичними. Таким чином викладений метод дозволяє з єдиних позицій розраховувати характеристики теплообміну і гідродинаміки газового потоку в трубі в широкому діапазоні чисел Рейнольдса. The purpose of the paper is to study the features of turbulent heat and momentum transfer in round tubes at small Reynolds numbers. The article analyzes the results of experimental and theoretical studies of the processes under consideration. The general disadvantage of the above-mentioned works is the lack of proper physical validity of the accepted semi-empirical theories, which does not allow us to properly take into account the specifics of the processes of turbulent transfer and substantially limits the scope of the applicability of the results obtained. It is shown that the account of the interaction of the molecular and molar transport mechanisms which are quantitatively comparable gives the possibility to reconcile the experimental results with the theoretical. The thus expounded method allows from single positions to expect descriptions of heat exchange and hydrodynamics of gas stream in a pipe in the wide range of numbers of Reynolds.Item Технологія виготовлення зовнішньої бічної поверхні катків гранулятора(ЦНТУ, 2017) Сіса, О. Ф.; Пукалов, В. В.; Кислюк, О. В.; Sisa, О.; Pukalov, V.; Kislyuk, О.Виконано обґрунтування технологічної схеми формоутворення зовнішньої бічної поверхні катка гранулятора, способом розмірної обробки електричною дугою з урахуванням особливостей фізичних механізмів їх утворення та гідродинамічних явищ в міжелектродному проміжку. Встановлені аналітичні зв’язки технологічних характеристик процесу розмірної обробки електричною дугою сталі ШХ15СГ з режимами обробки і геометричними параметрами. The article is dedicated to the development of technology and equipment a roller of granulators processing with dimensional electric arc as high-performance alternative to traditional methods of processing. It is suggested to get the lateral surface by dimensional electric arc with a given roughness of Ra = 6,3..22mkm, which allows you to take great allowances material at the lowest cost processing time. In such a case the cycle of matrix processing decreases in 4,1-8,2 times. The objectivity of technological schema the roller of a granulator by the method of dimensional processing by electric arc with consideration of specialties of physical mechanism of creation and hydrodynamic phenomena in electrode period was performed. The analytical connections of technological processing characteristics of sized processing by electrical arc of steel SHH15SG were established, with the modes of processing and geometrical parameters.Item Аналітичні дослідження контактного руху легких домішок у пневмосепаруючому каналі(ЦНТУ, 2017) Нестеренко, О. В.; Петренко, Д. І.; Павленко, І. І.; Лещенко, С. М.; Гончарова, С. Я.; Nesterenko, О.; Petrenko, D.; Pavlenko, I.; Leschenko, S.; Honcharova, S.Враховуючи складність та випадковість пневмосепараційного процесу, на який впливає значна кількість факторів, є необхідним вирішення наукового завдання щодо встановлення закономірностей контактної взаємодії легких домішок з зерном в зоні пневмосепарації. В статті розглянуто контактний рух легких домішок через багатошаровий зерновий потік в вертикальному пневмосепаруючому каналі (ПСК) при їх багаторівневому одношаровому введенні. Отримані теоретичні залежності, які дозволяють встановити закономірності впливу основних конструктивно-технологічних параметрів ПСК на якість процесу сепарації. The separation of grain materials in the air separation channel occurs in rather difficult conditions, since light impurities, which are located in the lower cereal layers for the separation into the sediment chamber, require, with a minimum change in trajectory, to cross all above-placed seed moving in a downward direction. As a result of this movement there is a contact between light impurities and grain, which significantly affects the quality of cleaning. Therefore, a very important task is the analytical research aimed at investigating the contact interaction of light impurities with grain in the air separation channel and its effect on the quality of separation. Taking into account the multilevel feeding of the material in the PSC it is necessary to determine its influence on the qualitative parameters of the separation process and the establishment of the basic laws of the interaction of light impurities with grain material in the working area of the PSC. As a result of the theoretical analysis, the regularity of the contact motion of light impurities is established at the multilevel feeding of grain material in the PSC, which allows to obtain the averaged trajectories of impurities after interaction with grain layers during aerodynamic separation. It is determined that the allocation of light impurities depends on their time and velocity through the grain layers, which vary depending on the angle of contact of impurities with grain, as well as from the place of installation of the upper point of the output of grain hɠ.ɜ.. With six-level introduction of the material with the placement of grain particles in the direction of movement in the PSC with an interval equal to their size (2R) the place of installation of the upper point of the output of grain hɠ.ɜ. must be at a height hɠ.ɜ.= 0,05 ... 0,055 m relative to the level I of the input. The purpose of further researches should be to determine the qualitative characteristics of pneumatic separation in the contact interaction of grain material with air flow at its multilevel introduction into the PSC.Item До визначення швидкості ковзання та зусилль, які діють в зачепленні черв’ячної передачі(ЦНТУ, 2017) Невдаха, Ю. А.; Дубовик, В. О.; Невдаха, А. Ю.; Пукалов, В. В.; Nevdaha, Y.; Dubovik, V.; Nevdaha, А.; Pukalov, V.В статті розглянута величина швидкості ковзання і її напрям відносно лінії дотикання черв’яка і черв’ячного колеса, визначені швидкості ковзання та зусилля, які діють в зачепленні. The purpose of the article is to investigate ways to increase the durability and tractive ability of worm gears. Improve the durability of worm gears by improving the working environment, as well as by applying an oil wedge. One of the ways to increase the pressure in the oil wedge, as well as increasing the loading capacity of the transmission is to change the geometry of the clutch. The article considers the value of the slip speed and its direction relative to the line of contact of the worm and worm wheel. The sliding speeds and forces that are in contact are determined. The peculiarity of a worm gear is slipping along the teeth. The magnitude of the slip velocity and its direction relative to the line of contact between the two bodies moving relative to each other, as well as the shape of the tangential surfaces, largely determine the hydrodynamic conditions of the engagement and, consequently, affect the performance of the transmission. Investigating the speed of sliding in worm gears it was found that the speed of movement of the contact line relative to the tooth of the worm wheel was small compared with the speed of the worm worm. The values of the angles formed by contact lines with directions for different points of the worm vary in a wide range. It was established that conditions for the formation of an oil wedge deteriorate with a decrease in the angle of recovery of a worm turn.