Збірники наукових праць ЦНТУ
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/1
Browse
8 results
Search Results
Item Аналіз постачальних пристроїв установок безперервної дії для завантаження сипких матеріалів з одним блоком завантажувальних секцій(КНТУ, 2016) Оришака, О. В.; Гуцул, В. І.; Артюхов, А. М.; Oryhsaka, Oleg; Gutsul, Vasily; Artiuhov, AnatolyОтримані залежності швидкості сипкого матеріалу в постачальному пристрої від висоти вільного падіння, коефіцієнта тертя, кута нахилу бокових стінок приймальної воронки, як для випадку нерухомого положення приймальної воронки, так і для випадку обертального руху воронки при різних значеннях кутової швидкості. Devices of continuous action have a number of advantages over systems with cyclic flow (high performance, low energy costs, lower consumption of materials and other). Improvement of continuous action is an actual scientific problem (is an urgent task). Аn analysis was Conducted of the influence of parameters of feeding mechanism of device on the speed of the free-flowing material. The resulting dependence of the speed of the free-flowing material in the feed device from the height of the free flight, the coefficient of friction, angle of inclination of the side walls of the receiving receiving hopper, as for the case of fixed position receiving hopper, and for the case of circular motion of the funnel for different values of the angular velocity. Conclusions: 1. At a stationary position of the funnel ensures a safe movement of the bulk material. 2. When a reciprocating rotary motion around the axis of the funnel can be a risk disturbing the process. To ensure reliable movement of bulk material is necessary to limit the angular rotation speed, or decrease the frictional force by applying materials with low friction for the respective surfaces.Item Дослідження вихідної швидкості сипкого матеріалу з постачального пристрою гравітаційно-роторного типу(КНТУ, 2008) Артюхов, А. М.; Оришака, О. В.; Оришака, В. О.У статті розглядаються питання побудови математичної моделі технологічного процесу завантаження дрібнозернистих сипких матеріалів двороторним постачальним пристроєм у клапанні мішки, представлено результати впливу основних параметрів постачального пристрою на вихідну швидкість сипкого матеріалу для здійснення технологічного процесу. In clause questions of construction of mathematical model of technological process of loading finegrained loose materials be a bilateral feeder in valvular sacks are considered, results of influence of key parameters of a feeder for target speed of a loose material for realization of technological are presented.Item Обгрунтування параметрів установки безперервної дії для завантаження сипких матеріалів(КНТУ, 2011) Оришака, О. В.; Оришака, В. О.; Артюхов, А. М.; Кравцов, А. О.; Oryshaka, О.; Oryshaka, W.; Artiukhov, А.; Kravtsov, А.Обґрунтовані параметри нових принципових рішень, які передбаченні в конструкції установки безперервної дії для завантаження сипких матеріалів нового покоління з метою підвищення технологічної надійності процесу завантаження, а саме телескопічного клапана, який дає можливість стабілізувати напруження в сипкому середовищі в зоні вивантажувального отвору бункера, завантажувальних пристроїв,що мають канали з випуклими криволінійними поверхнями і вертикальними вихідними патрубками, які забезпечують повне заповнення об'єму клапанного мішка сипучим матеріалом і зменшують втрати енергії при переміщенні матеріалу. In article are grounded the parameters of new of principles decisions which are foreseen in the construction of setting of unceasing action for the load of friable materials of new generation with the purpose of increase of technological reliability of process of load are grounded, namely telescopic valve, which enables to stabilize tension in a friable environment in the area of the unloading opening of bunker of loads devices with ducting, which I have protuberant curvilinear surfaces and vertical outputs union couplings which provide the complete filling of volume of alveolar sack by friable material and diminishes the losses of energy at moving of materials.Item Обгрунтування постачального пристрою установки безперервної дії для завантаження сипких матеріалів(КНТУ, 2014) Оришака, О. В.; Гуцул, В. І.; Артюхов, А. М.; Oryhsaka, O.; Gutsul, V.; Artiukhov, А.Визначений вплив параметрів постачального пристрою на швидкість руху сипкого матеріалу в каналах патрубків в стаціонарному положенні і при обертанні пристрою, зміна лінійної питомої маси сипкого матеріалу в патрубках, а також центр мас сипкого матеріалу. Установлено, що швидкість руху сипкого матеріалу в каналах патрубків при обертанні пристрою збільшується відносно його стаціонарного положення, що виключає порушення технологічного процесу із-за забивання каналів патрубків. Modern machines for loading friable materials into valve bags require a considerable amount of energy, allow the loss of fasoo material, as well as the violation of technological process at boot friable materials, so the improvement of modern mechanization is an actual scientific problem. The effect of the parameters of the feeding device the speed of movement of the friable material in the channels of the nozzle in a stationary position during rotation of the device, the change of a specific linear mass of granular material in the channel setup. It is established that the speed of the friable material in the channels of the nozzles during rotation of the device increases relative to its stationary position, which eliminates the violation of technological process of plugging nozzles. Resume: 1. The speed of movement of the friable material in patrols postchallenge of the device increases when the rotation of the rotor relative to the stationary position of the rotor. This makes it possible to avoid the accumulation of loose material that could lead to blockage of the channel. 2. With increasing angular velocity of rotation of the rotor the flow of material moves from the lower to the upper wall of the socket. 3. The weight of friable material in patrols, when the rotor is reduced.Item Теоретичне дослідження подільчо-формуючих постачальних пристроїв машин для завантаження сипких матеріалів(КНТУ, 2010) Оришака, О. В.; Гончаров, В. В.; Артюхов, А. М.; Оришака, В. О.; Orishaka, O.; Goncharov, V.; Artyukhov, A.; Orishaka, V.Теоретично обґрунтовані параметри подільчо-формуючих постачальних пристроїв машин для завантаження сипких матеріалів в клапанні мішки, а саме постачального пристрою з лійками, на вихідних частинах яких встановлені вивантажувальні патрубки з можливістю здійснювати зворотно- обертальний рух і постачального пристрою з формуючими гравітаційними поверхнями, які жорстко встановлені на корпусі, що змонтований на матеріалопроводі з можливістю здійснювати зворотно- обертальний рух. Встановлені оптимальні співвідношення вхідних і вихідних параметрів лійки та кута нахилу гравітаційної поверхні. Parameters of the division-forming nutritious device of machines for loading loose materials in valvular sacks are theoretically proved, namely the nutritious device with funnel on which target parts unloading branch pipes with an opportunity to make back and forth motion and the nutritious device with forming gravitational surfaces which are rigidly established on the case which is mounted on materials handling with an opportunity to make return-rotary movement are established. Optimum parities of entrance parameters funnel and a corner of an inclination of a gravitational surface are established.Item Теоретичне дослідження установки безперервної дії для завантаження сипких матеріалів(КНТУ, 2012) Оришака, О. В.; Гончаров, В. В.; Оришака, В. О.; Кравцов, А. О.; Oryshaka, О.; Goncharov, V.; Oryshaka, V.; Kravcov, А.Проведений аналіз продуктивності установки безперервної дії порівняно з продуктивністю машин з циклічною подачею сипких матеріалів в клапанні мішки. Продуктивність установок безперервної дії для завантаження сипких матеріалів в 1,5 рази вище продуктивності машин з циклічною подачею. Визначено оптимальне число секцій в залежності від подачі матеріалу. Установлені залежності для визначення швидкості руху сипких матеріалів по гравітаційним поверхням, які розташовуються в першій і другій четвертях. The analysis performance settings continuously compared with the productivity of machines with cyclic feed bulk materials in valve bags. Production facilities for continuous loading of bulk materials is 1.5 times higher performance machines with cyclic feeding. The optimum number of sections depending on the feed material.Item Динаміка постачального пристрою установки безперервної дії для завантаження сипких матеріалів(КНТУ, 2015) Оришака, О. В.; Гуцул, В. І.; Oryhsaka, Oleg; Gutsul, VasilyОтримані залежності, які описують обертальний рух постачального пристрою під дією електромагніта і серводвигуна. Визначений вплив параметрів електромагніта і серводвигуна на час обертання пристрою на заданий кут. Devices of continuous action have a number of advantages over systems with cyclic flow (high performance, low energy costs, lower consumption of materials and other). Improvement of continuous action is an actual scientific problem (is an urgent task). An analysis was Conducted of the influence of parameters of feeding mechanism of device on the rotation speed of the rotor and torque. Dependences that episouth the rotational movement of nutrients in the device under the action of an electromagnet and an actuator.Item Дослідження взаємного розміщення роторів в постачальному пристрої гравітаційно-роторного типу(КНТУ, 2009) Оришака, О. В.; Артюхов, А. М.; Оришака, В. О.; Малашенко, Ю. А.У статті розглянуті питання побудови математичної моделі технологічного процесу завантаження дрібнозернистих сипких матеріалів у клапанні мішки постачальним пристроєм гравітаційно-роторного типу, наведено результати впливу основних параметрів постачального пристрою на величину кута взаємного розміщення роторів при виконанні технологічного процесу завантаження. The article studies the questions of building the mathematical model of technological process of fine granular materials loading into valve sacks by the of gravitational-rotary type, it gives the results of the effect of basic parameters on the angle value of positional relationship of rotors when doing technological process of loading