Збірник наукових праць КНТУ. Техніка в сільськогосподарському виробництві, галузеве машинобудування, автоматизація.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/18
Свідоцтво про державну реєстрацію у Міністерстві юстиції України: серія КВ, №15253-3825 ПР.
Затверджено наказом Міносвіти і науки України № 1528 від 29.12.14р.
ISSN 2409-9392 (Online) 2409-9392(Print)
Мови видання: українська, російська, англійська, періодичність - один раз на рік;
Browse
9 results
Search Results
Item Дослідження перемішування матеріалів у кульовому млині як багатовимірному керованому об’єкті(КНТУ, 2016) Кондратець, В. О.; Мацуй, А. М.; Kondratets, Vasily; Matsui, AnatoliiВстановлено, що осереднення твердого у кульовому млині відбувається достатньо швидко, практично за 34 с. Більш проблематичним є перемішування твердого з водою. Запропоновано воду у кульовий млин до необхідного розрідження пульпи подавати трьома потоками – на поверхню вихідної руди, у приймальний пристрій завиткового живильника до граничного розрідження пісків класифікатора та безпосередньо у горловину кульового млина, розбризкуючи її в широкій зоні завантаження. The aim of work is to study the mixing of materials along the drum of the ball mill, which works in a closed circuit with mechanical single- qualifier for its improvement. The ball mill as a multidimensional object has four output value. In this article a study performed on one of them - the parameter of the mixing materials, which is characterized, on the one hand, averaging the size of the solid, on the other hand, by mixing the solid with water. It is found that the averaging of the solid is not very dependents on its shape and size, in ball mill it happens sufficiently rapidly for 34 seconds, practically continuously improving the performance for a given time interval. More problematic is the mixing of the solid and water, which under the existing conditions is carried on a length of 1/4 ... 1/3 mill drum and which in consequence, does not actively participate in the grinding of the ore. Proposed that the water in a ball mill should be fed to the required dilution of the pulp by the three streams - to the surface of the original ore, the receiver cochlear feeder to the classifier boundary liquefaction sand directly into the throat of a production unit, spraying it into a wide area load. The proposed approach supplying water into a ball mill provides inclusion 1/4 ... 1/3 the length of the drum in efficient crushing of ore, which greatly improves the performance of his work.Item Дослідження кульового млина, що подрібнює піски класифікатора, по каналу розрідження пульпи(КНТУ, 2008) Кондратець, В. О.; Мацуй, А. М.В статті приведені результати дослідження кульового млина, що подрібнює піски класифікатора, по каналу розрідження пульпи. Показано, що похибка ідентифікації співвідношення руда/вода не приводить при регулюванні до зміни режиму агрегату. Не допустимо в якості керуючого діяння використовувати зміну витрати води, яка подається безпосередньо у кульовий млин. In the article the results of research of ball mill, grinding down sands of classifier are resulted in the article, on the channel of dilution of mash. It is rotined that error of authentication of correlation ore/water does not lead at adjusting to the change of the mode of aggregate. It is not possible as managing influence to utillize the change of rate-of-flow, which is given directly in a ball mill.Item Дослідження нелінійної системи автоматичного управління подачею води у кульовий млин, що подрібнює піски класифікатора(КНТУ, 2013) Мацуй, А. М.; Кондратець, В. О.; Matsui, A.; Kondratets, V.Обґрунтована функціональна схема системи автоматичного управління подачею доданої води у кульовий млин, що подрібнює піски двоспірального класифікатора, та її складові елементи. Показано, що вона повинна містити обчислювальний блок, який формує змінне задаюче діяння на витрату доданої води, та ідеалізований елемент, що спрацьовує при занадто низьких рівнях вхідного сигналу і має характеристику без гістерезису. The aim is to study the automatic control system of water supply in a ball mill that grinds the sand classifier. It is shown that the stabilization of dilution of the pulp in a ball mill, which grinds sands double-qualifier is necessary to organize an incomplete invariant ratio control solid / liquid in the receiver cochlear feeder and final input to the ball mill feed into the neck of a small amount of water. Proposed a non-linear system of automatic control supply of water added to the ball mill containing idealized relay element and a computer unit, which in terms of the pulp and the actual ratio of solid / liquid in the receiver cochlear feeder, set ratio solid / liquid and the density of the ore forming variable sets the effect on water consumption. Idealized relay element and computing unit implemented in the controller. Idealized relay element operates at extremely low levels of the input signal and has the feature without hysteresis. The proposed automatic control system is stable and has high quality.Item Теоретичне дослідження відкритого гідростатичного перетворювача параметрів рідких середовищ(КНТУ, 2008) Кондратець, В. О.; Мацуй, А. М.У статті приведені результати теоретичних досліджень відкритого гідростатичного перетворювача параметрів рідких середовищ. Показано, що вихідний сигнал перетворювача залежить як від рівня рідкого середовища, так і від його повного тиску. На перетворювач здійснює вплив густина рідкого середовища при визначенні і рівня, і тиску. Висота перетворювача для умов приймального пристрою завиткового живильника може складати 0,6 м. The results of theoretical researches of the opened hydrostatical transformer of parameters of liquid environments are resulted in the article. It is rotined that the output signal of transformer depends both on the level of liquid of environment and from its complete pressure. On him the closeness of liquid of environment has influence at determination of both level and pressure. The height of transformer for the terms of takers-off of snail feeder can make 0,6 m.Item Обґрунтування довжини гнучких пневматичних трубок при вимірюванні параметрів хвильового процесу завиткового живильника(КНТУ, 2012) Мацуй, А. М.; Кондратець, В. О.; Сербул, О. М.; Macuy, А.; Kondratec, V.; Serbul, А.Стаття присвячена системі, що складається з камери тиску вторинного перетворювача, ввідної трубки та манометричного датчика тиску з пневматичною трубкою. Розглянуто конструктивні елементи завиткового живильника у горизонтальній і вертикальній площинах і на цій підставі вибрано місце установки датчиків тиску пульпи. Виходячи з конструктивних особливостей завиткового живильника і вимірювальних засобів, обґрунтовано довжину пневматичних трубок, яка повинна складати 3,0 м. The article is devoted the system, which includes the chamber a pressure of the second transformer, introductory tube and manometry pressductor with a pneumatic tube. The structural elements of snail feeder are considered in a horizontal and vertical planes, on this basis the place of setting of pressductors pulp is chosen. Coming from the structural features of snail feeder and measurings facilities, is grounded length of pneumatic tubes, which must be evened 3,0 м.Item Обґрунтування параметрів і структури блока ідентифікації співвідношення тверде/рідке по тиску пульпи(КНТУ, 2010) Кондратець, В. О.; Мацуй, А. М.; Kondratec, V.; Macuy, A.У статті приведені параметри і структура інформаційного блока комп’ютеризованої системи ідентифікації співвідношення тверде/рідке по показанням двох перетворювачів тиску, встановлених у донній частині приймального пристрою завиткового живильника з невеликим перепадом висоти. Обґрунтовано підхід розв’язання даної задачі в організаційно-технічному об’єкті, розглянуті проміжні алгоритми і алгоритми визначення співвідношення тверде/рідке та осереднення параметра. In the article parameters and structure of informative block of the computer-assisted system of authentication of correlation are resulted hard/liquid on the testimonies of two sensators, set in the ground part of takers-off of feeder with a small overfall on a height. Approach of decision of this task is grounded in an organizationally-technical object, intermediate algorithms and algorithms of determination of correlation are considered hard/liquid and finding of middle parameter.Item Розробка та дослідження САК струмовим режимом при вимірюванні вмісту магнітного заліза в пробах(КНТУ, 2012) Кондратець, В. О.; Мацуй, А. М.; Шалімов, В. О.; Лисенко, О. А.; Kondratec, V.; Macuy, А.; Shalimov, V.; Lysenko, О.У статті обґрунтована принципова схема і вимоги до якості системи автоматичного керування струмовим режимом приладу для вимірювання вмісту магнітного заліза у сипких здрібнених матеріалах. Показано, що її доцільно реалізувати як систему змінного струму, яка може бути побудованою з уніфікованих елементів. Визначено тип і параметри коректуючого пристрою змінного струму, який забезпечує необхідні показники якості керування. In the article an of principle chart is grounded and requirement to quality of the system of automatic control the current mode of device for measuring of maintenance of magnetic iron in the friable shredded materials. It is rotined that it is expedient to realize it as a system of alternating current, which can be built from compatible elements. A type and parameters of correcting device of alternating current, which provides the necessary indexes of management quality, is certain.Item Ідентифікація співвідношення руда/вода в приймальному пристрої завиткового живильника як регульованому об’єкті(КНТУ, 2011) Мацуй, А. М.; Кондратець, В. О.; Matsuy, A.; Kondratets, V.У статті приведені конструкція блока перетворювачів тиску пульпи та функціональна схема інформаційного блока розробленого засобу ідентифікації співвідношення руда/вода в приймальному пристрої завиткового живильника. Наведені конструктивні дані, складові апаратури, параметри фільтрування сигналів. In the article the construction of block of transformers pulp and functional diagram of informative block of the developed mean of identification of ratio is resulted ore/water in the snail feeder’s takers-off. Structural information, making apparatuses, parameters of filtration of signals, is resulted.Item Аналіз умов і засобів ідентифікації розрідження пульпи в приймальному пристрої завиткового живильника(КНТУ, 2009) Кондратець, В. О.; Мацуй, А. М.У статті приведені результати аналізу умов ідентифікації розрідження пульпи в приймальному пристрої завиткового живильника та засобів її здійснення. Показано, що в зоні ідентифікації здійснюються складні коливання пульпи. Для вимірювання рівня і тиску пульпи найкраще підходить пневматична трубка, однак дані засоби потребують удосконалення. In the article the results of analysis of terms of authentication of rarefaction of mash are resulted in the takers-off of snail feeder and devices for its realization. It is rotined that the difficult vibrations of mash are carried out in the area of authentication. For measuring of level and pressure of mash a pneumatic tube befits the best, however these facilities are required by improvements.