Кафедра електротехнічних систем та енергетичного менеджменту
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/11335
Browse
2 results
Search Results
Item Розробка системи електропостачання споживачів підстанції “Янтарна” 150/35/10 кВ(ЦНТУ, 2024-06-20) Балаєнко, Кирило Олексійович; Balaienko, KyryloМетою даної роботи є розробка системи електропостачання для споживачів підстанції «Янтарна» 150/35/10 кВ та хлібозаводу. Основна увага приділяється задоволенню вимог економічності та надійності роботи системи електропостачання. З цією метою було проведено комплекс техніко-економічних розрахунків, що включають аналіз електричних навантажень, режимів реактивної потужності та струмів коротких замикань. Запропоновано модернізацію підстанції «Янтарна» 150/35/10 кВ шляхом впровадження системи автоматизованого обліку електроенергії. Це дозволить ПрАТ «Кіровоградобленерго» значно покращити точність, оперативність та достовірність обліку електроенергії, а також зменшити втрати електроенергії за рахунок більш ефективного управління енергоспоживанням. The purpose of this work is to develop a power supply system for consumers of the Yantarna 150/35/10 kV substation and the bread factory. The main attention is paid to meeting the requirements of economy and reliability of the power supply system. For this purpose, a set of technical and economic calculations was carried out, including the analysis of electrical loads, reactive power modes and short-circuit currents. In a special section of the work, the electrical equipment of the 150/35/10 kV Kompaniivka substation was modernized. It is proposed to modernize the Yantarna 150/35/10 kV substation by implementing an automated electricity metering system. This will allow PrJSC "Kirovogradoblenergo" to significantly improve the accuracy, efficiency and reliability of electricity accounting, as well as to reduce electricity losses due to more efficient management of energy consumption.Item Моніторинг стану проводів повітряної лінії електропередачі за допомогою безпілотника(2022-12-14) Слободян, Марина Анатоліївна; Slobodian, MarynaМетою роботи є зниження рівня технічних пошкоджень діючої системи передачі електричної енергії за рахунок впровадження моніторингу проводу повітряної лінії здійснюваного на базі безпілотних літаючих апаратів. Проведено аналіз технічного стану повітряних ліній системи передачі ОЕС України. Встановлено, що для підвищення їх експлуатаційної надійності необхідно впровадження в електричні мережі систем дистанційного моніторингу проводів. Проведено детальний аналіз експлуатаційних дефектів проводів ПЛ. З’ясовано, що в якості параметрів контролю стану проводу ПЛ найбільш придатними є зображення проводу з відеокамери видимого діапазону та його температура, визначена за допомогою тепловізора. Розроблено структурну схему та алгоритм системи моніторингу стану проводів ПЛ на базі БпЛА. Встановлено, що для мобільної частини системи моніторингу стану проводу найбільш придатною є знімальна система DJI Zenmuse H20T, а в якості засобу доставки вимірювального обладнання до ПЛ – БпЛА DJI Matrice 300 RTK. Проведено оцінку економічної ефективності при впроваджені системи моніторингу стану проводу повітряної лінії. The purpose of the work is to reduce the level of technical damage to the existing electric power transmission system by introducing monitoring of the overhead line wire, carried out on the basis of unmanned aerial vehicles. The analysis of the technical condition of the overhead lines of the transmission system of the UES of Ukraine was carried out. It has been established that in order to increase their operational reliability, it is necessary to introduce systems for remote monitoring of wires into electrical networks. A detailed analysis of operational defects in overhead lines was carried out. It has been found that the most suitable parameters for monitoring the state of an overhead line wire are images of the wire from a video camera in the visible range and its temperature, determined using a thermal imager. A block diagram and an operation algorithm for the monitoring system for the condition of overhead lines wires based on UAVs have been developed. It has been established that the DJI Zenmuse H20T shooting system is most suitable for the mobile part of the wire condition monitoring system, and the DJI Matrice 300 RTK UAV is most suitable as a means of delivering measuring equipment to the overhead line. An assessment of economic efficiency in the implementation of a system for monitoring the condition of an overhead line wire was carried out.