Кваліфікаційні роботи
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/763
Browse
62 results
Search Results
Item type:Item, Удосконалення ефективності діяльності підприємства агротрейдингу(ЦНТУ, 2025-06) Шаленок, Лілія Миколаївна; Shalenok, LiliiaМетою кваліфікаційної роботи є сприяння сталому зростанню та конкурентоспроможності сільськогосподарського сектору, що включає економічний розвиток та покращення соціального добробуту в агроторгівельних спільнотах. The aim of this qualification thesis is to promote sustainable growth and competitiveness in the agricultural sector, encompassing economic development and improved social well-being within agritrading communities.Item type:Item, Удосконалення процесу менеджменту приватного підприємства(ЦНТУ, 2024-12) Полубок, Руслан Олексійович; Polubok, RuslanМетою даної роботи було спрямування на вдосконалення теоретичної бази та надання практичних рекомендацій щодо підвищення ефективності менеджменту як способу підвищення його функціональної ефективності. Для досягнення цієї мети переслідувалися наступні конкретні завдання: вивчити теоретичні аспекти функцій та ефективності менеджменту в системі управління аграрним підприємством; здійснити оцінку ефективності менеджменту ПП «Агрохім; розробити заходи з удосконалення менеджменту ПП «Агрохім». The purpose of this work was to improve the theoretical basis and provide practical recommendations for improving the effectiveness of management as a way to increase its functional efficiency. To achieve this goal, the following specific tasks were pursued: to study the theoretical aspects of the functions and effectiveness of management in the management system of an agricultural enterprise; to assess the effectiveness of management of PE "Agrokhim"; to develop measures to improve the management of PE "Agrokhim".Item type:Item, Цифрові трансформації у діяльності автотранспортного підприємства: стан та перспективи розвитку(ЦНТУ, 2024-12) Ковпак, Артем Олегович; Kovpak, ArtemМета кваліфікаційної роботи полягає аналізі сучасного стану, проблем і перспектив цифрових трансформацій у діяльності автотранспортного підприємства та розробці практичних рекомендацій щодо впровадження інноваційних технологій для підвищення ефективності управлінських і операційних процесів. The purpose of the qualification paper is to analyze the current state, challenges, and prospects of digital transformations in the activities of a motor transport enterprise and to develop practical recommendations for implementing innovative technologies to improve the efficiency of managerial and operational processes.Item type:Item, Прогнозування експлуатаційних характеристик спіральних свердел малих діаметрів(ЦНТУ, 2024-06-30) Іщенко, Віталій Сергійович; Ishchenko, VitaliiМетою дослідження є збільшення довговічності і надійності різального інструменту при свердлінні малих діаметрів через прогнозування експлуатаційних характеристик. Проведено аналіз методів і способів підвищення точності обробки отворів та розрахунків раціональних режимів обробки при заданих параметрах свердла для обґрунтованого прогнозування стійкості різального інструменту. Шляхом теоретичних досліджень з’ясовано вплив умов різання, матеріалу властивостей матеріалу, діаметра свердла і геометрії свердла на період стійкості при свердленні. Прогнозування зносу інструменту під час свердління виконувалося за допомогою аналітичної моделі Такеяма-Мурата та оновлення геометрії різального інструменту під час процесу формування стружки. Запропоновано алгоритм розрахунку прогнозування експлуатаційних характеристик спіральних свердел. The purpose of the study is to increase the durability and reliability of the cutting tool when drilling small diameters through the prediction of operational characteristics. An analysis of methods and ways of improving the accuracy of hole processing and calculations of rational processing modes at given parameters of the drill for reasonable forecasting of the stability of the cutting tool was carried out. The effect of cutting conditions, material, material properties, drill diameter, and drill geometry on the period of stability during drilling was determined through theoretical studies. Prediction of tool wear during drilling was performed using the Takeyama-Murat analytical model and updating the geometry of the cutting tool during the chip formation process. An algorithm for calculating the forecasting of the operational characteristics of spiral drills is proposed.Item type:Item, Підвищення ефективності механічної обробки наскрізних отворів(ЦНТУ, 2024-06-30) Зотов, Родіон Анатолійович; Zotov, RodionМетою дослідження є збільшення довговічності і надійності різального інструменту при свердлінні. Розглянуті різні варіанти конструкції свердел для обробки вуглепластиків, проведено дослідження геометричних параметрів обраної конструкції інструменту та спосібів заточки різальної кромки. За допомогою моделювання інструментальної поверхні у середовищі AutoDesk Inventor розроблена 3D модель спірального свердла. Проведено дослідження впливу установчих параметрів на профіль вихідної інструментальної поверхні. Шляхом теоретичних досліджень з’ясовано вплив факторів зменшення точності отворів, вплив швидкості, властивостей матеріалу, діаметра свердла, подачі та температури різання при обробці точних наскрізних отворів. Запропоновано для підвищення точності обробки наскрізних отворів в полімерних композиційних матеріалах схему різання із зміною подач. The purpose of the study is to increase the durability and reliability of the cutting tool when drilling. Various options for the design of drills for processing carbon plastics are considered, the geometric parameters of the selected tool design and ways of sharpening the cutting edge are studied. A 3D model of a spiral drill was developed using tool surface modeling in the AutoDesk Inventor environment. The influence of setting parameters on the profile of the initial tool surface was studied. Through theoretical studies, the influence of factors reducing the accuracy of holes, the influence of speed, material properties, drill diameter, feed and cutting temperature during the processing of precise through holes has been clarified. To increase the accuracy of processing through holes in polymer composite materials, a cutting scheme with a change in feed is proposed.Item type:Item, Комп’ютерне моделювання операції обжиму товстостінних трубних заготовок(ЦНТУ, 2024-01-30) Бєлов, Віталій Жанович; Bielov, VitaliyyМетою дослідження є дослідження операції обжиму товстостінних трубних заготовок на основі аналізу напружено-деформованого стану заготовки при пластичній формозміні для обгрунтованого вибору основних технологічних параметрів процесу деформування. Проведено аналіз процесу обжиму товстостінних трубних заготовок та особливостей існуючих методів отримання таких виробів. Визначена математична модель обжиму трубної анізотропічної заготовки вісесиметричним конічним пуансоном. Проведено чисельне моделювання обжиму трубної анізотропічної заготовки вісесиметричним конічним пуансоном. Проведено графічний аналіз оцінки впливу технологічних параметрів, кута конусності пуансона, умов тертя на контактній поверхні робочого інструмента і заготовки, анізотропії механічних властивостей заготовки на напружений і деформований стан, силові режими і граничні можливості формозміни операції обжиму товстостінних трубних заготовок. За допомогою комп’ютерного моделювання в програмному комплексі DEFORM 2D/3D проведено аналіз операційного переходу технологічного процесу обжиму товстостінних трубних заготовок. The purpose of the study is to study the operation of crimping thick-walled pipe blanks based on the analysis of the stress-strain state of the blank during plastic deformation for a reasonable choice of the main technological parameters of the deformation process. An analysis of the process of crimping thick-walled pipe blanks and features of the existing methods of obtaining such products was carried out. The mathematical model of the crimping of the pipe anisotropic workpiece with an axisymmetric conical punch is determined. Numerical modeling of the crimping of an anisotropic pipe blank with an axisymmetric conical punch was carried out. A graphical analysis of the influence of technological parameters, the taper angle of the punch, the conditions of friction on the contact surface of the working tool and the workpiece, the anisotropy of the mechanical properties of the workpiece on the stressed and deformed state, force modes and the limit possibilities of the shape change of the crimping operation of thick-walled pipe blanks was carried out. With the help of computer modeling in the DEFORM 2D/3D software complex, an analysis of the operational transition of the technological process of crimping thick-walled pipe blanks was carried out.Item type:Item, Моделювання процесу роздачі трубчастої заготовки по вісесиметричному пуансону(ЦНТУ, 2024-01-30) Колесник, Олександр Сергійович; Kolesnyk, OleksandrМетою дослідження є дослідження операції роздачі трубної заготовки на основі аналізу напружено-деформованого стану заготовки при пластичній формозміні для обгрунтованого вибору основних технологічних параметрів процесу деформування. Проведено аналіз процесу роздачі трубної заготовки та особливостей існуючих методів отримання таких виробів. Визначена математична модель роздачі трубної анізотропічної заготовки вісесиметричним конічним пуансоном. Проведено чисельне моделювання роздачі трубної анізотропічної заготовки вісесиметричним конічним пуансоном. Проведено графічний аналіз оцінки впливу технологічних параметрів, кута конусності пуансона, умов тертя на контактній поверхні робочого інструмента і заготовки, анізотропії механічних властивостей заготовки на напружений і деформований стан, силові режими і граничні можливості формозміни операції роздачі трубних заготовок. За допомогою комп’ютерного моделювання в програмному комплексі DEFORM 2D/3D проведено аналіз операційного переходу технологічного процесу роздачі трубної заготовки. Встановлені розподіли напружень та деформацій в здеформованому напівфабрикаті та виявлено кінцеву форму і розміри напівфабрикату після роздачі. The purpose of the study is to study the operation of distributing the cut billet based on the analysis of the stress-strain state of the billet during plastic deformation for a reasonable choice of the main technological parameters of the deformation process. An analysis of the process of distributing pipe blanks and the features of existing methods of obtaining such products was carried out. A mathematical model of distribution of an anisotropic pipe billet by an axisymmetric conical punch was determined. Numerical modeling of distribution of an anisotropic pipe billet by an axisymmetric conical punch was carried out. A graphical analysis of the influence of technological parameters, the taper angle of the punch, the conditions of friction on the contact surface of the working tool and the workpiece, anisotropy of the mechanical properties of the workpiece on the stressed and deformed state, force modes and the limit possibilities of shape change in the operation of distributing pipe blanks was carried out. With the help of computer modeling in the DEFORM 2D/3D software complex, an analysis of the operational transition of the technological process of distributing the pipe billet was carried out. The distributions of stresses and strains in the deformed semi-finished product were established, and the final shape and dimensions of the semi-finished product after distribution were revealed.Item type:Item, Дослідження пресування труб змінного перерізу(ЦНТУ, 2024-12-29) Карета, Віталій Вікторович; Kareta, VitalyМетою дослідження є на основі теоретичних і експериментальних досліджень встановити вплив параметрів пресового інструменту на зміну геометричних розмірів виробів при пресуванні труб. Представлена постановка задачі математического дослідження процесу пресування труб змінного сечення. Розроблена математическая модель определения усилий пресования при використанні специфічної профілювання пресового інструменту, що дозволяє спрогнозувати можливість виготовлення труби заданого сортаменту і визначити раціональну форму пресового інструменту. Представлені результати численного дослідження процесу пресування з використанням отриманої моделі. Аналізом напруженого стану і режимів пресування заготовки дано рекомендації щодо технологічного процесу пресування труб змінного перерізу і підвищення якості виробів, а також досягнення більшої стійкості робочих пресових інструментів. The purpose of the study is to establish the influence of the parameters of the press tool on the change in the geometric dimensions of the products during pipe pressing, based on theoretical and experimental studies. The formulation of the problem of mathematical research of the process of pressing pipes of variable cross-section is presented. A mathematical model for determining the pressing forces when using specific profiling of the press tool was developed, which allows predicting the possibility of manufacturing a pipe of a given assortment and determining the rational shape of the press tool. The results of numerous studies of the pressing process using the obtained model are presented. The analysis of the stress state and modes of pressing the workpiece provides recommendations for the technological process of pressing pipes of variable section and improving the quality of products, as well as achieving greater stability of working press tools.Item type:Item, Моделювання процесу екструзії труб конічно-ступінчастими голками(ЦНТУ, 2024-12-29) Гончаренко, Артур Сергійович; Honcharenko, ArturМетою дослідження є на основі теоретичних і експериментальних досліджень встановити вплив різних деформаційних умов, що регламентують технологічні можливості пресування труб з конічно-ступінчастими голками. Шляхом комп’ютерного проектування динаміки вогнища деформації і напружено-деформованого стану металу встановлені можливості для проектування і реалізації технологічного процесу пресування труб з конічно-ступінчастими голками. Виявлений вплив різних форм утворюючих пресового інструменту на характер формування енергосилових параметрів процесу деформації. Комп’ютерним моделюванням процесу пресування труб з конічно-ступінчастими голками встановлено розподіл інтенсивностей напружень по стадіям пресування та картину течії металу за викривленнями координатної сітки. Аналізом напруженого стану і режимів пресування заготовки дано рекомендації щодо технологічного процесу пресування труб з конічно-ступінчастими голками і підвищення якості виробів, а також досягнення більшої стійкості робочих пресових інструментів. The purpose of the study is to establish the influence of various deformation conditions, which regulate the technological possibilities of pressing pipes with conical-stepped needles, on the basis of theoretical and experimental studies. By means of computer design of the dynamics of the deformation center and the stress-strain state of the metal, the possibilities for the design and implementation of the technological process of pressing pipes with conical-stepped needles have been established. The influence of different forms of the forming press tool on the nature of the formation of energy parameters of the deformation process is revealed. Computer modeling of the process of pressing pipes with conical-stepped needles established the distribution of stress intensities by stages of pressing and the pattern of metal flow according to the curvatures of the coordinate grid. The analysis of the stress state and modes of pressing the workpiece provides recommendations on the technological process of pressing pipes with conical-stepped needles and improving the quality of products, as well as achieving greater stability of working press tools.Item type:Item, Обліково-інформаційне забезпечення оцінки ефективності грошових потоків підприємства(ЦНТУ, 2024-01-15) Слободяник, Альона Миколаївна; Slobodianyk, AlyonaУ першому розділі висвітлюється сутність грошових потоків підприємства, їх види, підходи щодо класифікації та визначаються фактори, які обумовлюють їх формування, розкриваються підходи до формування інформації про грошові потоки в системі бухгалтерського обліку та методика оцінки ефективності грошових потоків на підставі проведення аналітичних процедур. В другому розділі описуються організаційні засади провадження діяльності досліджуваного підприємства, здійснюється аналіз його основних фінансово-економічних показників діяльності, надається характеристика порядку та організації ведення бухгалтерського обліку грошових коштів, висвітлюється інформація щодо показників руху грошових коштів в облікових регістрах і звітності за основними його напрямками, здійснюється оцінка ефективності грошових потоків підприємства. Третій розділ містить рекомендації щодо удосконалення методики і організації обліку та аналізу грошових потоків, визначаються пріоритетні напрямки оптимізації грошових потоків. The first chapter highlights the essence of the cash flows of the enterprise, their types, approaches to classification and determines the factors that determine their formation, reveals the approaches to the formation of information about cash flows in the accounting system accounting and methods of assessing the effectiveness of cash flows based on analytical procedures. In the second chapter the organizational principles of the activity of the researched enterprise are described, its main financial and economic indicators of activity are analyzed, the procedure and organization of cash accounting are described, it is highlighted information on cash flow indicators in accounting registers and reporting in its main directions, an assessment of the effectiveness of the company's cash flows is carried out. The third section contains recommendations for improving the methodology and organization of accounting and analysis of cash flows, the priority directions for optimizing cash flows are determined.