Центральноукраїнський науковий вісник. Технічні науки.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/9042
Ідентифікатор медіа: R30-03350 (рішення Національної ради України від 25.04.2024 р. № 1418).
ISSN 2664-262X (p)
DOI: 10.32515/2664-262X
Browse
2 results
Search Results
Item Development of Mechatronic Systems for Targeted Division and Selection of Seed Material(ЦНТУ, 2024) Aliiev, E.; Aliieva, O.; Govorukha, V.; Kobets, O.; Алієв, Е. Б.; Алієва, О. Ю.; Говоруха, В. Б.; Кобець, О. М.One of the key stages in seed material processing is sorting, as seed mixtures typically contain impurities of various origins. These impurities include stems, leaves, mineral inclusions, weed seeds, and damaged seeds of the primary crop. Seed sorting, as a subtask of separation, relies on the physical differences between the components of the mixture. The main physical characteristics of seeds include size, shape, weight, color, density, and others. These properties determine the parameters of modern seed cleaning equipment, influencing its design and operational efficiency. Одним із ключових етапів обробки насіннєвого матеріалу є сортування, адже насіннєва суміш містить домішки різного походження: стебла, листя, мінеральні включення, насіння бур'янів та пошкоджене насіння основної культури. Сортування насіння, як підзадача сепарації, базується на фізичних відмінностях між компонентами суміші. До основних фізичних характеристик насіння належать розмір, форма, вага, колір, щільність тощо. Ці властивості визначають параметри сучасного насіннєочисного обладнання, впливаючи на його конструкцію та ефективність.Item Результати експериментальних досліджень селекційно-насінницького трієра(ЦНТУ, 2023) Алієв, Е. Б.; Лупко, К. О.; Aliiev, E.; Lupko, К.Метою є експериментальне обґрунтування основних параметрів та режимів роботи селекційно- насінницького трієра дрібнонасіннєвих культур, розробка алгоритму роботи і програмного забезпечення відповідної мехатронної системи. Для проведення експериментальних досліджень розроблено й створено лабораторний селекційно-насінницький трієр. Для зміни частоти обертання циліндра і напрямку обертання використано плату керування Arduino UNO і драйвер електродвигуна постійного струму L298N. Керувати частотою і напрямом обертання циліндра можна в ручному режимі з використанням потенціометра і автоматичному з використанням монітор-порту Arduino IDE. Робочим органом трієра є циліндр, який складається з пластин із чарунками. В результаті експериментальних досліджень процесу сепарації дрібнонасіннєвих культур на лабораторному циліндричному чарунковому трієрі отримано залежності зміни мінімального θmin і максимального θmax кутів виходу насіння з чарунки циліндра трієра від маси вихідного матеріалу насіння M0, частоти обертання циліндра n та вмісту домішок f0. Отримані залежності увійшли до програмного забезпечення системи керування мехатронної системи, яке дозволяє налаштувати положення лотка для збору насіння в результаті керування сервоприводом. The goal is experimental substantiation of the main parameters and modes of operation of the selection and seed trier of small-seeded crops, development of the work algorithm and software of the corresponding mechatronic system. For conducting experimental research, a laboratory selection and seed trier was developed and created. To change the rotation frequency of the cylinder and the direction of rotation, the Arduino UNO control board and the L298N DC motor driver were used. The frequency and direction of rotation of the cylinder can be controlled manually using a potentiometer and automatically using the Arduino IDE monitor port. The working body of the trier is a cylinder, which consists of plates with shells. As a result of experimental studies of the process of separation of small-seeded crops on a laboratory cylindrical shell trier, the dependences of the change in the minimum θmin and maximum θmax angles of seed exit from the cylinder shell of the trier on the mass of the seed material M0, the rotation frequency of the cylinder n and the content of impurities f0 were obtained. The resulting dependencies are fed into the mechatronic control system software, which allows the position of the seed tray to be adjusted as a result of servo control.