Збірник наукових праць КНТУ. Техніка в сільськогосподарському виробництві, галузеве машинобудування, автоматизація.
Permanent URI for this communityhttps://dspace.kntu.kr.ua/handle/123456789/18
Свідоцтво про державну реєстрацію у Міністерстві юстиції України: серія КВ, №15253-3825 ПР.
Затверджено наказом Міносвіти і науки України № 1528 від 29.12.14р.
ISSN 2409-9392 (Online) 2409-9392(Print)
Мови видання: українська, російська, англійська, періодичність - один раз на рік;
Browse
8 results
Search Results
Item Дослідження впливу конструктивних параметрів на зміну кутів в опорах у ВПК(КНТУ, 2011) Павленко, І. І.; Вахніченко, Д. В.; Годунко, М. О.; Pavlenko, I.; Vakhnichenko, D.В статті досліджується вплив конструктивних параметрів механізмів з паралельною кінематикою на функціональні можливості верстатів з паралельною кінематикою. Influence of structural parameters of parallel structure mechanism on hexapod functional possibilities in the article.Item Загальна методика розрахунку та проектування конструкцій захватних пристроїв промислових роботів(КНТУ, 2013) Павленко, І. І.; Годунко, М. О.; Кіріченко, І. Д.; Pavlenko, I.; Godunko, М.; Kirichenko, I.В статті представлена послідовність розрахунку та проектування захватних пристроїв роботів, яка включає в себе обгрунтований вибір умов роботи промислового робота та його захватного пристрою, опис алгоритму силового та функціонального розрахунку, аналіз конструктивних параметрів на силові та функціональні можливості захватного пристрою, та визначення параметрів двигуна його приводу. The market conditions of modern engineer require active introduction of the flexible automated systems. By important component part them there are industrial works which are considered the most perspective facilities of automation of production processes. Implementation of the put tasks a robot is carried out by a working organ, namely him grippers which intended for fascination and retaining of the articles of production or technological rigging. At relatively short time of existence of robots is created very plenty of different implementations of mechanical grippers, that conditioned by the considerable variety of robotisation operations and details with which works work under various conditions. The general question in planning of constructions of delights is development of general method of their calculation and planning, which must be executed complex. In the article the algorithm of planning and calculation of constructions of grippers of industrial robots is presented with the ground of influence of their structural parameters on power and functional descriptions. The general method of calculation and planning of grippers is resulted can be improved, but complex approach, presented in a method gives the most acceptable result of receipt of construction of grippers, estimation of influence of structural parameters of grippers on their power and functional possibilities, and also possibility to describe co-operate the resulted factors for the delights of different level of specialization, at their different office hours and structural features.Item Аналіз робочого простору верстата з паралельною кінематикою при обробці деталей під кутом(КНТУ, 2013) Павленко, І. І.; Вахніченко, Д. В.; Pavlenko, I.; Vakhnichenko, D.В статті проаналізовано робочий простір верстатів з паралельною кінематикою при обробці під кутом за умови ведення обробки з різних боків деталі. Графічно було визначено, як впливає кут нахилу виконавчого органу на форму слідуючих функціональних зон, а саме: ехнологічну; резервну технологічну; інструменту; установчих рухів; конструктивну, обслуговування, недосяжну, нереалізовану. When designing mechanisms with parallel kinematics is important to determine the condition of the effective functioning of the machine, ie, the exercise of the necessary movements that are performed within the movement and orientation of the executive body. It is proposed to assess the functioning of machines by mechanisms with parallel kinematics (MPK), based on the conditions of movements at an angle such that the need for treatment holes at an angle where the mobile platform provides an appropriate traffic flow. For the effective implementation of the set operations must be informed determine design parameters machines by MPK. This machine operation is possible in the presence of geometric space, which is a working space (function space) machines by MPK limited basis, fixed top plate and side walls. This paper analyzes the workspace tools with parallel kinematics in the processing angle for conditions of handling parts from different angles. Graphically, it was determined the effect of the angle of the executive body of the form by following functional areas, namely technology, backup technology, tools, founding movements, structural, maintenance, unattainable, unrealized. The study presented in this paper show that the tilting platform to set the angle at the point of processing the service area of the MPK deviates from the axis of symmetry of the machines by MPK in the direction opposite to tilt the tool.Item Кінематична структура промислових роботів(КНТУ, 2011) Павленко, І. І.; Сторожук, М. О.; Вахніченко, Д. В.; Годунко, М. О.; Pavlenko, I.; Storozhuk, M.; Vahnichenko, D.; Godunko, M.В статті показані основні принципи методу структурного аналізу при підході до рішення задач обґрунтованого вибору кінематичної схеми промислового робота, доведена ефективність використання цього методу в умовах багатоваріантного вирішення задачі пошуку найбільш доцільної схеми робота. The main principles of the method of structural analysis in approach to solve the tasks of the controlled choice of mechanical diagram of industrial robot are shown in the article. The effectiveness of the use of this method in conditions of multivariate solution of the task in search of the most qualified diagram of robot is proved.Item Аналіз впливу конструктивних параметрів МПК на рух платформи під кутом(КНТУ, 2011) Павленко, І. І.; Вахніченко, Д. В.; Годунко, М. О.; Pavlenko, I.; Vakhnichenko, D.В статті досліджується вплив конструктивних параметрів механізмів з паралельною кінематикою на функціональні їх можливості. Influence of structural parameters of parallel structure mechanism on hexapod functional possibilities in the article.Item Аналіз передавальних відношень плеч сил затискних важелів захватних пристроїв роботів(КНТУ, 2010) Павленко, І. І.; Годунко, М. О.; Pavlenko, I.; Godunko, M.У даній статті описано аналіз впливу складових плеч сил затискних важелів захватних пристроїв промислових роботів. Також у статті наведено графіки впливу визначених складових, які побудовані для умов реальної можливості утримування деталі захватними важелями. По отриманим залежностям зроблено практичні висновки. The analysis of influence of making shoulders of forces of clamping levers of grippers of industrial robots is described in this article. Also the graphs of influence of certain constituents which are built for the terms of the real possibility of retaining of detail clamping levers are resulted in the article. On the got dependences conclusions are done.Item Інтегральний робочий простір верстатів-гексаподів(КНТУ, 2010) Павленко, І. І.; Валявський, І. А.; Гнатюк, А. О.; Pavlenko, I.; Valyavsky, I.В статті запропоновані удосконалені компоновочні схеми верстатів-гексаподів з керованими параметрами робочого простору, досліджено формування та параметри їх інтегрального робочого простору. In article advanced layout schemes of hexapods with operated working space parameters are offered, formation and parameters of their integrated working space is investigated.Item Структурні планувально-компонувальні дослідження роботизованих комплексів(КНТУ, 2010) Павленко, І. І.; Мажара, В. А.; Сторожук, М. О.; Pavlenko, I.; Mazhara, V.; Storozhuk, M.В даній статті розглянуто питання формування роботизованих комплексів в залежності від виконання технологічного обладнання, промислових роботів та допоміжних пристроїв. Запропоновано використання планувальної, конструктивно-планувальної, конструктивно-функціональної та ін. структур. In this article the question of forming of robotized complexes is considered depending on implementation of technological equipment, industrial robots and associated units. The use of plan is offered, structurally plan and structurally functional structures.